Unitech TS100

Unitech TS100 2D Hands-Free Presentation Barcode Scanner

korisnički priručnik

Uvod

This manual provides essential information for the proper setup, operation, and maintenance of your Unitech TS100 2D Hands-Free Presentation Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and to prevent damage.

The Unitech TS100 is an omnidirectional USB wired desktop barcode reader designed for efficient and intuitive scanning of 1D and 2D barcodes, including PDF417 and Data Matrix, in retail and other point-of-sale environments.

Sigurnosne informacije

  • Ne izlažite skener ekstremnim temperaturama, vlazi ili izravnoj sunčevoj svjetlosti.
  • Izbjegavajte ispuštanje skenera ili izlaganje jakim udarcima.
  • Ne pokušavajte rastavljati ili modificirati skener. Time ćete poništiti jamstvo.
  • Za spajanje koristite samo priloženi USB kabel.
  • Keep the scanning window clean to ensure accurate barcode reading.

Sadržaj paketa

Molimo provjerite sadržaj paketa kako biste bili sigurni da su svi artikli prisutni:

  • Unitech TS100 2D Presentation Barcode Scanner
  • USB kabel
  • Vodič za brzi početak (ako je primjenjivo)

Proizvod gotovview

The Unitech TS100 features a compact design with a large scan window for easy barcode presentation. Its omnidirectional scanning capability allows for quick and efficient data capture.

Unitech TS100 2D Presentation Scanner with feature icons

Figure 1: Unitech TS100 2D Presentation Scanner highlighting its large scan window, auto-sensing mode, 1D & 2D barcode scanning, and multiple scanning modes.

Ispred view of Unitech TS100 barcode scanner

Slika 2: Prednja strana view of the Unitech TS100 scanner, showing the blue scanning window and the Unitech logo.

Nazad view of Unitech TS100 barcode scanner with product label

Slika 3: Natrag view of the Unitech TS100 scanner, displaying the product label with model number TS100-SUCB00-SG and power specifications.

Postavljanje

Follow these steps to set up your Unitech TS100 barcode scanner:

  1. Raspakirajte skener: Carefully remove the TS100 scanner and its accessories from the packaging.
  2. Spojite USB kabel: Insert the USB cable into the port at the back of the scanner.
  3. Povezivanje s glavnim uređajem: Plug the other end of the USB cable into an available USB port on your computer, laptop, or POS system.
  4. Instalacija upravljačkog programa: The scanner is typically plug-and-play. Your operating system should automatically detect and install the necessary drivers. Wait for the installation to complete.
  5. Uključivanje: The scanner will power on automatically once connected to a powered USB port. A beep and/or LED indicator will confirm it is ready for use.

Upute za rad

The Unitech TS100 is designed for hands-free operation, offering multiple scanning modes for various applications.

Osnovno skeniranje

  • Place the barcode within the scanner's field of view, facing the scanning window.
  • The scanner will automatically detect the barcode and emit a successful scan indication (e.g., a beep and/or green LED).
  • The scanned data will be transmitted to your connected host device as keyboard input.

Načini skeniranja

The TS100 supports multiple scanning modes to optimize performance for different barcode types and environments:

  • Normalni način rada: Standard scanning for most 1D and 2D barcodes.
  • Smartphone Mode: Optimized for reading barcodes displayed on smartphone screens, which can sometimes be reflective.
  • Brzi način rada: Designed for faster scanning of multiple barcodes in quick succession.

Refer to the full programming manual (available on the Unitech website) for instructions on how to switch between these modes using configuration barcodes.

Održavanje

Pravilno održavanje osigurava dugotrajnost i performanse vašeg skenera:

  • Čišćenje prozora za skeniranje: Lagano koristite meku krpu koja ne ostavlja dlačice dampOperite vodom ili blagim, neabrazivnim sredstvom za čišćenje. Nemojte koristiti jake kemikalije ili abrazivne materijale.
  • Čišćenje eksterijera: Obrišite vanjski dio skenera mekom, suhom krpom.
  • Skladištenje: Kada se ne koristi, skener čuvajte na čistom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.

Rješavanje problema

If you encounter issues with your TS100 scanner, refer to the table below for common problems and solutions:

ProblemMogući uzrokOtopina
Skener se ne uključuje.USB cable not properly connected or host device USB port is not powered.Provjerite je li USB kabel sigurno spojen i na skener i na glavni uređaj. Pokušajte s drugim USB priključkom ili glavnim uređajem.
Skener ne čita barkodove.Barcode is damaged, poorly printed, or not supported. Scanning window is dirty. Incorrect scanning mode.Ensure the barcode is clear and undamaged. Clean the scanning window. Verify the barcode symbology is supported. Try switching scanning modes (e.g., Smartphone Mode for screen barcodes).
Skenirani podaci su netočni ili nepotpuni.Poor barcode quality. Scanner configuration issues.Ensure the barcode is clear. Refer to the programming manual for advanced configuration settings.
Skener pišti, ali se podaci ne prenose.Host device not recognizing the scanner as a keyboard input.Ensure the cursor is in a text field on your host device. Reconnect the USB cable. Restart the host device.

Tehnički podaci

Detailed technical specifications for the Unitech TS100 scanner:

ZnačajkaSpecifikacija
SenzorImage Sensor with 1280x800 pixels
Osvjetljenje650nm RED LED
Brzina skeniranja60 fps
Skew AngleHorizontal Angle: 50°; Vertical Angle: 35°
Kut nagiba±65°
Kut nagiba360°
Optička razlučivost1D: 4 mil; 2D: 6.7 mil
Printing Contrast Scale25%
Domaćin sučeljeUSB
Dimenzije (D x Š x V)4.1 in x 5.7 in x 2.7 in (105 mm x 146 mm x 70 mm)
Težina12.1 oz / 345g (without cable)
1D Symbologies SupportedUPC-A/E, EAN-8/13, UPC/EAN Supplementals, EAN-8 Extend, Code 128, Code 39, Code 93, Code 11, Interleaved 2 of 5, Matrix 2 of 5, Codabar, MSI Plessey, GS1 DataBar, China Postal, Korean Postal, etc.
2D Symbologies SupportedPDF417, MicroPDF417, DataMatrix, DataMatrix-Inverse, Maxicode, QRcode, MicroQR, Aztec, Aztec Inverse, Han Xin, Han Xin Inverse
IndikatorLED, Zujalo
Radna temperatura32°F do 122°F (0°C do 50°C)
Temperatura skladištenja-40°F do 158°F (-40°C do 70°C)
Relativna vlažnost0% do 95% bez kondenzacije

Jamstvo i podrška

The Unitech TS100 barcode scanner main unit comes with a Jamstvo 1 godine od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalu i izradi pri normalnoj uporabi.

For technical support, warranty claims, or further assistance, please contact Unitech customer service or visit the official Unitech webstranicu. Sačuvajte račun kao dokaz o kupnji za jamstvene usluge.

Unitech America Webstranica: www.unitechamerica.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.