Flyrivergo Rotating Display Stand with LED Light

Uvod

This manual provides instructions for the safe and efficient operation of your Flyrivergo Rotating Display Stand with LED Light. Please read this manual thoroughly before use and retain it for future reference.

Sigurnosne informacije

Always ensure the product is placed on a stable, flat surface. Do not exceed the maximum load capacity of 44 lbs (20 kg). Keep away from water and extreme temperatures. Unplug when not in use or during cleaning.

Sadržaj paketa

• 1 x Rotating Display Stand with LED Light
• 1 x strujni adapter (110V)

Image: The rotating display stand shown next to its brown packaging box and power cable.

Postavljanje

1. Postavite stalak za prikaz na ravnu, stabilnu površinu.
2. Connect the power adapter to the stand's power input port.
3. Uključite adapter za napajanje u standardnu ​​električnu utičnicu od 110 V.
4. Ensure the stand is stable before placing any items on it.

Upute za rad

Kontrole nadview

The display stand features three main controls:

• Rotating Switch Button: Controls the rotation direction (clockwise/counter-clockwise) and turns rotation on/off.
• Gumb prekidača svjetla: Uključuje ili isključuje LED svjetlo.
• Gumb za podešavanje svjetline: Dims or brightens the LED light.

Slika: Detaljna view of the control buttons and knob on the side of the display stand.

Kontrola rotacije

1. To start rotation, press the rotating switch button.
2. To change rotation direction (clockwise or counter-clockwise), press the rotating switch button again.
3. To stop rotation, press the rotating switch button until it is off.

Image: Illustration of the rotation control, showing how to switch between clockwise and counter-clockwise motion.

Kontrola LED svjetla

1. To turn on the LED light, press the light switch button.
2. To adjust brightness, turn the brightness adjustment knob clockwise to increase brightness and counter-clockwise to decrease it.
3. To turn off the LED light, press the light switch button again.

Image: Visual guide demonstrating how to adjust the LED light brightness using the control knob.

Načini rada

The display stand supports three operating modes:

• Način 1: Rotation Only (controlled by rotating switch).
• Način 2: Lighting Only (controlled by light switch and dimmer).
• Način 3: Rotation + Lighting (both functions active).

Image: Graphic depicting the three available modes for the display stand.

Tihi rad

The rotating stand features a smooth motor designed for quiet operation (≤40dB), ensuring minimal disturbance during use, such as video recording.

Image: Chart comparing the noise level of the turntable to common sounds.

Značajke

• Visoka nosivost: Supports up to 44 lbs (20 kg), suitable for various products.
• Podesivo LED svjetlo: Integrated white LED lighting with adjustable brightness to enhance product visibility and eliminate shadows.
• Dvosmjerna rotacija: Easily switch between clockwise and counter-clockwise rotation.
• Tih motor: Operates at ≤40dB, ideal for photography and video recording without noise interference.
• Izdržljiva konstrukcija: Made from ABS material with anti-slip feet for stability.

Image: The display stand illuminating a glass, showcasing the effect of the LED light.

Tehnički podaci

Image: Visual representation of the product specifications.

Održavanje

• Očistite površinu mekom, suhom krpom.
• Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Provjerite je li uređaj isključen iz struje prije čišćenja.

Rješavanje problema

• Not rotating: Check power connection. Ensure the rotating switch is on. Reduce load if exceeding capacity.
• Svjetlo ne radi: Check power connection. Ensure the light switch is on. Adjust brightness knob.
• Neobična buka: Ensure the load is balanced and within capacity. Check for any obstructions.

Jamstvo i podrška

For warranty information or technical support, please refer to the product packaging or contact Flyrivergo customer service directly. Keep your purchase receipt for warranty claims.

Video zapisi proizvoda