Atmosphera Jily Pendant Lamp D48 cm User Manual

1. Uvod i sigurnosne informacije

Thank you for choosing the Atmosphera Jily Pendant Lamp. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

Važna sigurnosna upozorenja:

• Uvijek isključite napajanje na glavnom prekidaču prije bilo kakve instalacije, održavanja ili zamjene žarulje.
• Installation must be performed by a qualified electrician or a competent person in accordance with local electrical codes.
• Securely fasten the pendant lamp to the ceiling using appropriate and robust mounting hardware suitable for the ceiling material.
• Izbjegavajte izlaganje lamp to moisture or direct water contact to prevent damage and electrical hazards.
• Nemojte prekoračiti maksimalnu vattage specificirano za žarulju (40 W).
• Ensure the light bulb is fully cooled before attempting to replace it.

2. Što je u kutiji

Carefully unpack the contents and ensure all items are present and undamaged. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• 1 x Jily Pendant Lamp Assembly (including shade, cable, and ceiling canopy)

Note: Light bulb (E27, max 40W) and mounting hardware for the ceiling are not included and must be purchased separately.

3. Postavljanje i instalacija

This section outlines the general steps for installing your pendant lamp. Always refer to the safety warnings in Section 1 before beginning.

Potrebni alati (nisu uključeni):

• Odvijač (Phillips i/ili ravni)
• Skidači žice
• Drill (if required for ceiling mounting)
• Olovka
• Ljestve
• Voltage Tester

Koraci instalacije:

1. Isključite napajanje: Locate the main circuit breaker and turn off the power to the circuit where you will be installing the lamp. Verify the power is off using a voltage tester.
2. Pripremite strop: If replacing an existing fixture, carefully remove it. Ensure the ceiling junction box is secure and capable of supporting the lamp's weight (approximately 1.08 kg).
3. Mount Ceiling Canopy Bracket: Attach the mounting bracket (usually included with the lamp, inside the canopy) to the ceiling junction box using appropriate screws. Ensure it is firmly secured.
4. Podesite duljinu kabela: The cable length is approximately 90 cm. Adjust the cable to your desired hanging height by feeding it through the ceiling canopy. Secure the cable at the desired length using the provided strain relief mechanism within the canopy.
5. Žičani spojevi: Spojite električne žice iz lamp to the corresponding wires from the ceiling. Typically, connect live (brown/black) to live, neutral (blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors. Ensure all connections are secure.
6. Attach Ceiling Canopy: Carefully push the ceiling canopy up against the ceiling, covering the wiring. Secure it to the mounting bracket using the screws provided.
7. Ugradnja žarulje: Screw an E27 base light bulb (max 40W, not included) into the lamp držač. Nemojte previše zatezati.
8. Vrati snagu: Ponovno uključite napajanje na glavnom prekidaču.
9. Test Lamp: Turn on the light switch to ensure the lamp funkcionira ispravno.

Image: Detail of the ceiling canopy, showing the connection point to the ceiling.

Image: The Jily pendant lamp, showcasing its full design and illuminated bulb.

4. Upute za rad

The Atmosphera Jily Pendant Lamp dizajniran je za jednostavno rukovanje.

• Uključivanje/isključivanje: Kontrolirajte lamp using a standard wall light switch connected to the circuit.
• Žarulja: This fixture uses one E27 base light bulb. For optimal performance and light quality, choose a bulb that suits your preference (e.g., LED, incandescent, warm white).

Image: The Jily pendant lamp installed in a living space, demonstrating its aesthetic and light output.

5. Održavanje

Regular maintenance will help preserve the appearance and functionality of your pendant lamp.

Čišćenje:

• brisanje prašine: Regularly use a soft, dry duster or a microfiber cloth to gently remove dust from the lampshade and other surfaces.
• Čišćenje mjesta: Za tvrdokorne mrlje, lagano dampen a cloth with water (do not use harsh chemicals or abrasive cleaners) and gently wipe the affected area. Avoid excessive moisture, especially on the paper shade.

Zamjena žarulje:

1. Isključite napajanje: Uvijek isključite napajanje lamp at the main circuit breaker and the wall switch before replacing the bulb.
2. Ostavite da se ohladi: Ensure the old bulb has completely cooled down before touching it.
3. Uklonite staru žarulju: Carefully unscrew the old E27 bulb counter-clockwise.
4. Ugradnja nove žarulje: Uvrnite novu žarulju E27 (maks. 40 W) u smjeru kazaljke na satu dok ne bude čvrsto. Nemojte previše zategnuti.
5. Vrati snagu: Turn the power back on and test the new bulb.

Slika: Detaljna view of the paper and iron lampshade material.

6. Rješavanje problema

If you encounter issues with your pendant lamp, pogledajte sljedeće uobičajene probleme i rješenja:

Ako problem i dalje postoji nakon što ste pokušali riješiti problem, obratite se kvalificiranom električaru ili korisničkoj podršci.

7. Specifikacije

8. Jamstvo i podrška

Specific warranty information for the Atmosphera Jily Pendant Lamp may vary by region and retailer. Please refer to your purchase documentation or contact the retailer where you purchased the product for details regarding warranty coverage.

For technical support, missing parts, or further assistance, please contact the customer service department of ATMOSPHERA CREATEUR D'INTERIEUR or your retailer.

When contacting support, please have your model name (Jily) and model number (3560232579516) available.