JVC HA-XC72T Wireless Headphones User Manual

Uvod

Hvala na kupnjiasing the JVC HA-XC72T Wireless Headphones. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before use and keep it for future reference.

Sigurnosne informacije

• Nemojte rastavljati, popravljati ili modificirati jedinicu.
• Izbjegavajte izlaganje uređaja ekstremnim temperaturama, izravnoj sunčevoj svjetlosti ili visokoj vlažnosti.
• Keep the unit away from water and other liquids, except for its specified water resistance.
• Do not use the unit at excessively high volumes for extended periods to prevent hearing damage.
• Čuvati izvan dohvata djece. Mali dijelovi mogu predstavljati opasnost od gušenja.

Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

• JVC HA-XC72T Wireless Headphones (Left and Right earbuds)
• Kutija za punjenje
• USB kabel za punjenje
• Earpieces (S/M/L sizes)
• "XX" Logo Sticker

Postavljanje

1. Punjenje slušalica i kutijice

Prije prve upotrebe, potpuno napunite slušalice i kutijicu za punjenje.

1. Place both left and right earphones into the charging case.
2. Connect the USB charging cable to the charging case and a USB power adapter (not included).
3. Indikator punjenja lamps on the case will show the charging status. Once fully charged, the lamps will change or turn off.

The JVC HA-XC72T charging case with earbuds, held in a hand, highlighting the long battery life of up to 21 hours (9 hours from earbuds + 12 hours from case). Actual playback time may vary.

2. Bluetooth uparivanje

Za spajanje slušalica na uređaj:

1. Take both earphones out of the charging case. They will automatically enter pairing mode. The indicator lamp on one earbud will flash rapidly.
2. Na svom uređaju (pametnom telefonu, tabletu itd.) omogućite Bluetooth i potražite dostupne uređaje.
3. Select "HA-XC72T" from the list of found devices.
4. Once connected, the indicator lamp prestat će bljeskati.

Upute za rad

Uključivanje/isključivanje

• Uključivanje: Take the earphones out of the charging case. They will power on automatically.
• Isključivanje: Place the earphones back into the charging case. They will power off automatically and begin charging.

Reprodukcija glazbe i kontrola glasnoće

The HA-XC72T features touch controls on each earbud.

• Reproduciraj/pauziraj: Tap the touch sensor on either earbud once.
• Sljedeća pjesma: Tap the touch sensor on the right earbud twice.
• Prethodni zapis: Tap the touch sensor on the left earbud twice.
• Pojačati: Tap the touch sensor on the right earbud three times.
• Smanjivanje glasnoće: Tap the touch sensor on the left earbud three times.

Noise Cancelling / Ambient Sound Mode

The headphones offer Active Noise Cancellation and a Quick Ambient Sound function.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves, emphasizing the ability to enjoy sound in quiet environments.

• Prebaci načine rada: Press and hold the touch sensor on the left earbud for approximately 2 seconds to cycle through Noise Cancelling ON, Ambient Sound ON, and Noise Cancelling OFF.
• Quick Ambient Sound: This function allows you to hear your surroundings without removing the earphones, useful for conversations.

Način niske latencije

This mode reduces audio delay, enhancing the experience for gaming and video playback.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds, illustrating the low latency mode for synchronized audio and video.

• Aktiviraj/deaktiviraj: Press and hold the touch sensor on the right earbud for approximately 2 seconds to toggle Low Latency Mode ON/OFF.

Pozivanje bez ruku

• Odgovori/prekini poziv: Tap the touch sensor on either earbud once.
• Odbij poziv: Press and hold the touch sensor on either earbud for approximately 2 seconds.

Upotreba jedne slušalice

Either the left or right earbud can be used independently for music playback or calls.

Održavanje

To ensure the longevity and performance of your headphones:

• Redovito čistite slušalice i kutijicu za punjenje mekom, suhom krpom.
• Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Ensure the earphones are dry before placing them back into the charging case.
• Slušalice spremite u kutijicu za punjenje kada ih ne koristite kako biste ih zaštitili od prašine i oštećenja.

The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance, suitable for outdoor use. Note: IP55 rating applies to the earbud body only.

Rješavanje problema

If you encounter issues with your HA-XC72T headphones, refer to the following common solutions:

No Sound from One Earbud (or other pairing issues)

If only one earbud is producing sound, or if you experience other pairing difficulties, try the following steps:

1. Place both left and right earphones back into the charging case.
2. Take both left and right earphones out of the case simultaneously. Check if the issue is resolved.
3. If the issue persists, delete the "HA-XC72T" Bluetooth registration from your device's Bluetooth settings and attempt to re-pair.
4. If the above steps do not resolve the issue, perform a factory reset (initialization) as follows:

Factory Reset (Initialization) Steps:

1. Place both left and right earphones into the charging case. Ensure the charging lamps are lit, indicating they are charging.
2. While the earphones are in the case, press and hold the touch sensors on both the left and right earphones for approximately 15 seconds. The lamp will blink or its reaction will change, indicating initialization is in progress. Perform this for both earbuds.
3. Release your fingers from the touch sensors and close the charging case lid.
4. Pričekajte otprilike 10-20 sekundi.
5. Take both left and right earphones out of the case simultaneously. The earphones will begin synchronizing with each other again.
6. On your smartphone or device, open the Bluetooth settings. If "HA-XC72T" is still listed, select "Forget Device" or "Delete Device".
7. Perform the Bluetooth pairing process again from step 1 of the "Bluetooth Pairing" section.

Nema snage

• Provjerite jesu li kućište za punjenje i slušalice potpuno napunjene.
• Provjerite je li kabel za punjenje sigurno spojen.

Loša kvaliteta zvuka

• Ensure the earphones are properly seated in your ears. Try different earpiece sizes for a better seal.
• Približite se povezanom uređaju kako biste smanjili smetnje.
• Clean any debris from the earphone nozzles.

Tehnički podaci

Jamstvo

This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

podrška

For further assistance, technical support, or warranty inquiries, please contact JVC customer service through their official webweb-mjesto ili kontaktne podatke navedene na pakiranju proizvoda.