SILVERCREST SNS 45 B4 UV Nail Lamp Kit

Uvod

Thank you for choosing the SILVERCREST SNS 45 B4 UV Nail Lamp Kit. This comprehensive 217-piece starter kit is designed for strengthening natural nails, reshaping, and filling. The UV lamp features an automatic shut-off function with selectable times of 90, 150, or 240 seconds. Please read this manual carefully before first use to ensure safe and proper operation of the device and its components. Keep these instructions for future reference.

An image showing the SILVERCREST SNS 45 B4 UV nail lamp unit along with several components of the 217-piece starter kit, including various gels, brushes, and files.

Sigurnosne upute

Always observe the following safety precautions when using electrical appliances and handling chemical products:

• Električna sigurnost: Ensure the device is connected to a properly grounded power outlet. Do not use if the power cord or plug is damaged. Keep the device away from water or damp okruženja.
• Izloženost UV svjetlu: Avoid direct eye contact with the UV light. Prolonged exposure to UV light can be harmful to eyes and skin. Use appropriate eye protection if necessary.
• Rukovanje kemikalijama: Use nail gels, glues, and other liquids in a well-ventilated area. Avoid contact with skin and eyes. In case of contact, rinse immediately with plenty of water and seek medical advice if irritation persists. Keep all chemical products out of reach of children.
• Djeca i kućni ljubimci: This device is not a toy. Keep it out of reach of children and pets.
• Namjena: Use the device only for its intended purpose as described in this manual. Do not modify the device.
• Skladištenje: Store the device and all components in a cool, dry place when not in use.

Sadržaj paketa

The SILVERCREST SNS 45 B4 kit includes the following items:

• 1 x UV Nail Lamp Jedinica
• 4 x UV-A 9 W Bulbs (replaceable)
• 2 x Nail Glue (3 g each)
• 2 x UV Gel (transparent, 15 ml each)
• 1 x French Gel (white, 5 ml)
• 1 x Nail Oil (4 ml)
• 1 x Finishing Solution (100 ml)
• 1 x Sand Blade File
• 1 x Sanding Block
• 3 x Polishing Files (fine, medium, coarse)
• 1 x Cuticle Pusher
• 1 x četka
• 1 x Spot Swirl Applicator with various tips
• 100 x Cells (presumably nail wipes or forms)
• 100 x Nail Tips (various sizes)
• 1 x Nail Tip Cutter

Note: Nail polish is not included in this kit.

Postavljanje

1. Raspakirati: Carefully remove all components from the packaging. Retain the packaging for storage or transport.
2. Plasman: Place the UV nail lamp unit on a stable, flat, and heat-resistant surface. Ensure there is adequate ventilation around the device.
3. Bulb Installation/Check: Otvorite lamp unit and ensure the four UV-A 9 W bulbs are securely installed. If not, gently insert them into their sockets.
4. Priključak za napajanje: Connect the power cord to the UV nail lamp unit and then plug it into a suitable electrical outlet.

Upute za rad

Follow these steps for using your UV Nail Lamp Komplet:

1. priprema: Prepare your nails by cleaning, filing, and pushing back cuticles using the provided tools. Apply nail tips if desired, and shape them with the nail tip cutter and files.
2. Nanošenje gela: Apply a thin, even layer of the desired UV gel (transparent or French white) or nail glue to your nails.
3. Curing Time Selection: Select the desired automatic shut-off time on the UV lamp: 90, 150, or 240 seconds, depending on the gel or glue instructions.
4. Stvrdnjavanje: Carefully place your hand or foot into the UV lamp jedinica. lamp will activate and begin the curing process.
5. Automatsko isključivanje: Lamp will automatically turn off once the selected time has elapsed. Remove your hand or foot.
6. Završna obrada: After curing, use the finishing solution to remove any sticky residue. Shape and polish your nails further with the sanding block and polishing files. Apply nail oil for hydration.
7. Ponoviti: Repeat steps for additional layers of gel or for other nails as needed.

Održavanje

• Čišćenje: Disconnect the device from the power supply before cleaning. Wipe the exterior of the UV lamp unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Zamjena žarulje: The UV-A 9 W bulbs are replaceable. If a bulb stops working or its effectiveness diminishes, replace it with a new bulb of the same type and wattage. Ensure the device is unplugged before attempting to replace bulbs.
• Skladištenje: When not in use, store the UV nail lamp kit and all its components in a clean, dry place, away from direct sunlight and extreme temperatures.

Rješavanje problema

• Lamp Ne uključuje se:
  • Check if the power cord is securely plugged into both the device and the electrical outlet.
  • Provjerite je li utičnica funkcionalna.
  • Inspect the UV bulbs to ensure they are correctly seated and not burnt out. Replace any faulty bulbs.
• Gels Not Curing Properly:
  • Ensure the correct curing time is selected for the specific gel product being used.
  • Check the UV bulbs for proper function. Dim or non-working bulbs will affect curing.
  • Apply gels in thin layers. Thick layers may not cure completely.
  • Verify that the gel product is compatible with UV lamps.
• Automatic Shut-off Malfunction:
  • If the automatic shut-off feature does not work, unplug the device, wait a few minutes, and plug it back in. If the issue persists, contact customer support.

Tehnički podaci

Jamstvo i podrška

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or contact the retailer or manufacturer directly. Keep your proof of purchase for warranty claims.