XOSS XR01 Bicycle Tail Light User Manual

Uvod

Hvala na kupnjiasing the XOSS XR01 Bicycle Tail Light. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device. Please read this manual thoroughly before use to ensure optimal performance and safety.

Image: XOSS XR01 Smart Tail Light with its main features.

Sadržaj paketa

Molimo provjerite paket kako biste bili sigurni da su svi artikli prisutni:

• XOSS XR01 Tail Light x 1
• Saddle Bracket x 1
• Seatpost Bracket x 1
• Type-C kabel za punjenje x 1
• Gumica x 1
• Fastening Bands x 4
• Korisnički priručnik x 1

Slika: Detaljna view of the XOSS XR01 package contents.

Postavljanje i instalacija

The XOSS XR01 supports two easy installation methods without requiring any tools.

1. Nosač cijevi sjedala

1. Attach the seatpost bracket to your bicycle's seatpost.
2. Secure the bracket using the provided rubber band.
3. Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.

2. Nosač sjedala

1. Attach the saddle bracket to the rails under your bicycle saddle.
2. Secure the bracket using the provided fastening bands.
3. Slide the XOSS XR01 tail light onto the mounted bracket until it clicks into place.

Image: XOSS XR01 tail light installed on a seatpost.

Image: Installation diagrams for seatpost and saddle mounts.

Upute za rad

Uključivanje/isključivanje

• Za uključivanje: Pritisnite i držite tipku za napajanje 2 sekunde.
• Za isključivanje: Pritisnite i držite tipku za napajanje 2 sekunde.

Promjena načina rada

• While the light is on, short press the power button to cycle through different lighting modes.
• The device features mode memory, automatically recalling the last used mode when powered on.

Funkcija automatskog uključivanja/isključivanja

The XR01 is equipped with an intelligent vibration sensor:

• The light automatically turns on when vibration (movement) is detected.
• If no movement is detected for 30 seconds, the light will automatically turn off to conserve battery.

Image: Automatic On/Off feature in action.

Smart Brake Sensor

The built-in brake sensor enhances safety by detecting deceleration:

• When braking is detected, the tail light automatically illuminates at its maximum brightness.
• This alerts vehicles and pedestrians behind you, significantly improving your visibility and safety.

Image: The XOSS XR01 tail light with its smart brake sensor activated.

Video: Demonstration of the XOSS XR01 bicycle tail light's features, including automatic on/off and brake sensing.

Punjenje

The XOSS XR01 uses a convenient Type-C charging interface.

• Connect the provided Type-C charging cable to the tail light and a USB power source (e.g., computer, wall adapter).
• Za potpuno punjenje potrebno je približno 1 sat.
• The light will indicate charging status (e.g., solid light while charging, off when fully charged).

Image: Charging the XOSS XR01 tail light with a Type-C cable.

Tehnički podaci

Održavanje

• Čišćenje: Wipe the tail light with a soft, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
• Vodootpornost: The device is IPX6 waterproof, meaning it is protected against powerful water jets. It can withstand heavy rain but should not be submerged in water.
• Skladištenje: Store the tail light in a cool, dry place when not in use for extended periods. Charge the device periodically (e.g., every 3 months) to maintain battery health.
• Njega baterije: Izbjegavajte često potpuno pražnjenje baterije kako biste produžili njezin vijek trajanja.

Image: XOSS XR01 tail light demonstrating its IPX6 waterproof capability.

Rješavanje problema

• Svjetlo se ne pali: Ensure the battery is charged. Press and hold the power button for 2 seconds to turn it on.
• Automatic on/off not working: Check if the device is securely mounted and if there is sufficient vibration to trigger the sensor. Ensure the auto-on feature is enabled (if applicable, refer to mode switching).
• Brake sensor not responding: Ensure the light is firmly attached and positioned correctly. The sensor relies on deceleration to activate.
• Kratko trajanje baterije: Ensure the device is fully charged. Battery life can vary based on the selected lighting mode. Extreme temperatures can also affect battery performance.
• Problemi s punjenjem: Try a different Type-C cable or USB power source. Ensure the charging port is clean and free of debris.

Jamstvo i podrška

For warranty information and customer support, please refer to the official XOSS webweb-mjesto ili se obratite prodavaču. Sačuvajte račun kao dokaz o kupnji.