Rocketfish Tilting TV Wall Mount User Manual

Uvod

Thank you for choosing the Rocketfish Tilting TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 32-inch to 90-inch flat-panel televisions, this mount offers a secure and low-profile solution with convenient fingertip tilt adjustment for optimal viewkutovi. Molimo vas da prije početka instalacije pažljivo pročitate ovaj priručnik i sačuvate ga za buduću upotrebu.

Image: Rocketfish Tilting TV Wall Mount, front view.

Sigurnosne informacije

Improper installation or use of this product can result in serious injury or damage. Please observe the following safety precautions:

• Pročitajte sve upute: Ensure you understand all instructions and warnings before installation. If you have any questions, contact customer support.
• Kapacitet težine: Do not exceed the maximum weight capacity of 130 lbs (59 kg). This mount is designed for TVs between 32 and 90 inches.
• Vrsta zida: This mount is designed for installation on wood stud walls or solid concrete/brick walls. Do not install on drywall alone.
• Profesionalna instalacija: If you are unsure about your ability to install this mount safely, seek assistance from a qualified professional.
• Provjera komponente: Before installation, verify that all components are present and undamaged. Do not use damaged parts.
• Izbjegavajte pretjerano zatezanje: Do not over-tighten screws, as this may cause damage to the mount or your TV.
• djeca: Držite djecu podalje od područja postavljanja.

Sadržaj paketa

Carefully unpack the box and ensure all items listed below are present and undamaged. If any parts are missing or damaged, do not attempt to install the mount. Contact Rocketfish customer support for assistance.

• Sastavljanje zidne ploče
• Nosači za TV (2)
• Komplet hardvera (razni vijci, podloške, odstojnici, sidra)
• Priručnik s uputama

Postavljanje i instalacija

Potreban alat (nije uključen)

• Odvijač za glavu Phillips
• Drill with appropriate drill bits (wood or masonry)
• Tražilica greda (za ugradnju drvenih greda)
• Razina
• Olovka
• Mjerna traka
• Čekić (za betonske sidra)

Kontrolni popis prije instalacije

• TV kompatibilnost: Verify your TV's VESA mounting pattern and weight are within the mount's specifications (32"-90" and up to 130 lbs).
• Struktura zida: Ensure the wall can safely support the combined weight of the mount and your TV.
• Mjesto: Choose a mounting location free from electrical wires, water pipes, or other hazards.

Image: Visual representation of TV compatibility for the mount.

Instalacija korak po korak

1. Locate Wall Studs (Wood Stud Installation): Use a stud finder to locate the edges and center of two adjacent wood studs. Mark the center of the studs at the desired height for the top of your TV. Ensure the marks are level.
2. Označite točke bušenja: Hold the wall plate against the wall, aligning its center with your marked stud centers. Use a level to ensure the wall plate is perfectly horizontal. Mark the drilling points through the holes on the wall plate.
3. Izbušite pilot rupe: For wood studs, drill pilot holes using a 7/32" (5.5 mm) drill bit to a depth of 2.2" (55 mm). For concrete/brick walls, use a 3/8" (10 mm) masonry drill bit to a depth of 2.4" (60 mm) and insert concrete anchors.
4. Pričvrstite zidnu ploču: Secure the wall plate to the wall using the provided lag bolts and washers. Tighten the bolts firmly but do not over-tighten.
5. Pričvrstite nosače za TV na TV: Carefully place your TV face down on a soft, clean surface. Attach the two TV bracket arms to the back of your TV using the appropriate screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
6. Objesite TV na zidnu ploču: With assistance, carefully lift the TV and hook the TV bracket arms onto the top edge of the wall plate. Gently lower the TV until the brackets engage with the wall plate.
7. Sigurna televizija: Locate the locking screws or mechanisms on the bottom of the TV bracket arms. Tighten these screws to secure the TV to the wall plate, preventing accidental dislodgement.
8. Podešavanje nagiba: Loosen the tilt tension knob(s) on the mount (if applicable) to adjust the TV to your desired viewing angle. Once set, tighten the knob(s) to secure the tilt position.

Upravljanje funkcijom nagiba

The Rocketfish Tilting TV Wall Mount features fingertip tilt technology, allowing you to easily adjust your TV's vertical viewing angle. To tilt your TV:

1. Loosen Tension: Locate the tilt tension knob(s) on the side or bottom of the TV bracket arms. Turn the knob(s) counter-clockwise slightly to loosen the tension.
2. Podešavanje kuta: Gently push or pull the bottom of your TV to achieve the desired upward or downward tilt angle.
3. Sigurna pozicija: Once the desired angle is achieved, turn the tilt tension knob(s) clockwise to tighten and secure the TV in place. Ensure the TV is stable before releasing to.

Image: Close-up of the tilt tension knob for adjustment.

Održavanje

Regular maintenance helps ensure the longevity and safe operation of your TV wall mount.

• Čišćenje: Obrišite nosač mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala jer mogu oštetiti završnu obradu.
• Periodične provjere: Periodically check all screws and connections to ensure they remain tight and secure. If any looseness is detected, re-tighten them immediately.
• Pregled oštećenja: Inspect the mount for any signs of damage or wear. If any damage is found, do not use the mount and contact customer support.

Rješavanje problema

If you encounter issues with your Rocketfish TV wall mount, refer to the following common problems and solutions:

If the problem persists or is not listed here, please contact Rocketfish customer support.

Tehnički podaci

Jamstvo i podrška

Rocketfish products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official Rocketfish website. If you require technical assistance, have questions about installation, or need to report missing/damaged parts, please contact Rocketfish customer support. Have your product model number (RF-TVMLPT03V3) and purchase information ready when contacting support.

You can often find support contact information on the Rocketfish official webweb-mjestu ili putem prodavača gdje ste kupili proizvod.