ADATA Fusion 1600W Titanium Power Supply Unit User Manual

1. Uvod

This manual provides essential information for the proper installation, operation, and maintenance of your ADATA Fusion 1600W Titanium Power Supply Unit (PSU). Designed for high-performance computing systems, this 80 Plus Titanium certified PSU features ATX 3.0 and PCIe 5.0 compatibility, ensuring stable and efficient power delivery. Please read this manual thoroughly before proceeding with installation or use.

2. Sigurnosne informacije

• Električna opasnost: Power supplies contain high voltage components. Do not open the PSU casing. Servisiranje smije obavljati samo kvalificirano osoblje.
• Prekid napajanja: Always disconnect the AC power cord from the wall outlet before installing, removing, or cleaning the PSU or any other computer components.
• Pravilno uzemljenje: Ensure your computer system and the wall outlet are properly grounded to prevent electrical shock.
• Ventilacija: Do not block the ventilation openings of the PSU. Ensure adequate airflow within your computer case to prevent overheating.
• Vlaga: Keep the PSU away from water, humidity, and other liquids.
• Temperatura: Operate the PSU within the specified temperature range. Avoid extreme heat or cold.
• Uprava za kabele: Route cables carefully to avoid pinching or damage, which can lead to short circuits or fire hazards.

3. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u vašem paketu:

• ADATA Fusion 1600W Titanium Power Supply Unit
• Modular Cable Set (including Motherboard, CPU, PCIe/GPU, SATA, and Molex cables)
• AC kabel za napajanje
• Montažni vijci
• Korisnički priručnik (ovaj dokument)

4. Postavljanje

4.1. Fizička instalacija

1. Provjerite je li računalo isključeno i je li kabel za napajanje izmjeničnom strujom isključen iz zidne utičnice.
2. Otvorite kućište računala.
3. Locate the PSU mounting area, typically at the bottom or top rear of the case.
4. Carefully slide the ADATA Fusion PSU into the designated slot.
5. Secure the PSU to the case using the provided mounting screws.

4.2. Kabelske veze

The ADATA Fusion 1600W PSU is fully modular, allowing you to connect only the cables required for your system. Refer to the image below for port identification.

This image displays the ADATA Fusion 1600W Titanium Power Supply Unit from an angled top-down perspective. The modular cable connection panel is visible on the left side, labeled for SATA & Molex, Prime Port - Motherboard, CPU & VGA, and 12VHPWR. The top features a fan grill with a geometric pattern, revealing the cooling fan beneath. The side of the unit shows the 'FUSION' branding.

1. Motherboard Power: Spojite 24-pinski ATX kabel iz napajanja na odgovarajući priključak na matičnoj ploči.
2. CPU snaga: Connect the 4+4-pin or 8-pin EPS/CPU cable(s) from the PSU to the CPU power connector(s) on your motherboard.
3. PCIe/GPU Power: Connect the appropriate 6+2-pin or 12VHPWR PCIe 5.0 cables from the PSU to your graphics card(s). Ensure all required power connectors on your GPU are utilized.
4. SATA/Molex Power: Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives. Use Molex cables for other peripherals as needed.
5. Periferne veze: Connect any other necessary cables for case fans, RGB controllers, or other components.
6. AC napajanje: Once all internal connections are made, connect the AC power cord to the PSU and then to a grounded wall outlet.

5. Operativni

After completing the installation and cable connections:

1. Provjerite je li prekidač za napajanje na stražnjoj strani PSU-a u položaju 'UKLJUČENO'.
2. Power on your computer system.
3. The ADATA Fusion PSU is designed for efficient and stable operation. Its 80 Plus Titanium certification indicates high power efficiency, reducing heat generation and energy consumption.
4. This PSU supports Prime Ecosystem Management Software. Refer to the ADATA website for software download and instructions on monitoring and controlling PSU performance, fan speeds, and other features.

6. Održavanje

• Čišćenje: Periodically clean the exterior of the PSU and the fan grill to prevent dust buildup. Use compressed air to gently remove dust from the fan and internal components (ensure the PSU is powered off and unplugged).
• Pregled kabela: Redovito provjeravajte sve kabelske veze kako biste bili sigurni da su sigurni i da nema oštećenja.
• Uvjeti okoliša: Maintain a clean, dry, and well-ventilated environment for your computer system to optimize PSU lifespan and performance.

7. Rješavanje problema

If you encounter issues with your ADATA Fusion PSU, consider the following common troubleshooting steps:

• Bez napajanja:
  • Provjerite je li kabel za napajanje izmjeničnom strujom sigurno spojen i na napajanje i na zidnu utičnicu.
  • Verify the PSU power switch is in the 'ON' position.
  • Provjerite zidnu utičnicu s drugim uređajem kako biste bili sigurni da ima napajanja.
  • Ensure all modular cables are firmly seated in both the PSU and the respective components.
• Nestabilnost/rušenja sustava:
  • Confirm that your PSU wattage is sufficient for all installed components.
  • Provjerite ima li labavih kabelskih spojeva.
  • Pratite temperaturu sustava kako biste bili sigurni da se komponente ne pregrijavaju.
• Buka ventilatora:
  • Ensure the PSU fan is not obstructed by cables or dust.
  • If using Prime Ecosystem Management Software, check fan speed settings.

If problems persist after attempting these steps, contact ADATA customer support for further assistance.

8. Specifikacije

9. Jamstvo i podrška

ADATA provides a limited warranty for the Fusion 1600W Titanium Power Supply Unit. For detailed warranty terms, conditions, and registration information, please visit the official ADATA webstranicu ili pogledajte jamstveni list koji ste dobili s proizvodom.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact ADATA customer service through their official webweb-mjesto ili kontaktne podatke navedene u pakiranju proizvoda.

ADATA Official Webstranica: www.adata.com