Mroinge M701 Non-Programmable Thermostat User Manual

Uvod

This manual provides instructions for the installation, operation, and maintenance of your Mroinge M701 Non-Programmable Thermostat. This device is designed for single-stage 1 Heat/1 Cool systems, offering clear temperature and humidity display with a large blue LCD.

Značajke proizvoda

• Large LCD display with blue backlight for clear readability.
• Displays current room temperature and humidity.
• Kompatibilno s jednostrukimtage 1H/1C systems (Gas, Oil, or Electric Furnaces).
• Dual power options: 24VAC power source or 2 AAA batteries (C-wire not required for battery operation).
• Separate heating and cooling swing settings for optimal comfort control.
• Temperature calibration function for accurate readings.
• Built-in 3-minute compressor delay protection to extend HVAC system lifespan.

Important Compatibility Note: This thermostat is not compatible with Heat Pump Systems, Aux heating, Emergency heating, Multi-Stage Systems, RV systems, or 120/240V Electric Baseboard/Line Volt Systems.

Što je u kutiji

This image displays the contents of the Mroinge M701 thermostat packaging. It includes the thermostat unit, mounting hardware, an installation manual, and terminal wire label stickers.

• 1 x Mroinge M701 Thermostat
• 1 x Upute za instalaciju
• 2 x Mounting Screws and Wall Anchors
• 1 x Terminal Wire Label Stickers

Vodič za instalaciju

Prije nego počnete

• Ensure the power to your heating/cooling system is turned off at the main breaker before starting installation.
• Confirm compatibility with your existing system. This thermostat is designed for single-stage 1H/1C systems (Gas, Oil, Electric Furnaces).
• Pripremite potreban alat: odvijač, alat za skidanje izolacije (ako je potrebno).

Uklanjanje starog termostata

1. Pažljivo uklonite poklopac starog termostata.
2. Za referencu, snimite sliku spojeva ožičenja.
3. Label each wire with the provided terminal wire label stickers according to its connection on your old thermostat.
4. Odspojite žice i uklonite staru bazu termostata sa zida.

Montaža novog termostata

This image displays the dimensions of the Mroinge M701 thermostat: 4.92 inches (width) x 3.74 inches (height) x 0.98 inches (depth).

1. Position the new thermostat base on the wall and mark the mounting holes.
2. Po potrebi izbušite pilot rupe i umetnite sidra u zid.
3. Pričvrstite novu bazu termostata na zid pomoću priloženih vijaka.

Ožičenje termostata

This image illustrates the wiring terminals on the Mroinge M701 thermostat base. It shows common terminals (C, O, B, W) and power/relay terminals (RH, RC, G, Y).

• Connect the labeled wires from your wall to the corresponding terminals on the new thermostat base. Ensure connections are secure.
• Refer to the terminal label reference chart for specific wire functions.

Note: If your system has thick, stranded wires, or wires labeled 110V or 120V, it is not compatible with this thermostat.

Powering the Thermostat

The thermostat can be powered either by a 24VAC C-wire or by 2 AAA batteries.

• If using batteries, insert 2 fresh AAA alkaline batteries into the battery compartment.

This image shows the battery compartment located at the top of the Mroinge M701 thermostat, designed for easy battery replacement. It indicates that 2 AAA batteries are required and not supplied.

Dovršavanje instalacije

1. Carefully attach the thermostat front panel to the mounted base.
2. Restore power to your heating/cooling system at the main breaker.

Upute za rad

Prikaz prekoview

This image shows the main display of the Mroinge M701 thermostat. It features a large blue LCD screen displaying the current room temperature (e.g., 90°F), the set temperature (e.g., 79°F), and indicators for system mode (Cool) and fan status.

The large blue LCD screen displays:

• Current Room Temperature (range: 32°F to 99°F / 0°C to 50°C)
• Set Temperature (range: 44°F to 90°F / 7°C to 32°C)
• Room Humidity (range: 10%RH to 99%RH)
• System Mode (Cool, Heat, Off)
• Fan Mode (On, Auto)
• Indikator slabe baterije

Postavljanje temperature

Koristite Up i dolje arrow buttons on the right side of the thermostat to adjust the desired set temperature.

This image shows a hand pressing the "Up" arrow button on the Mroinge M701 thermostat to increase the set temperature. The display clearly shows the room temperature and the adjustable set temperature.

Odabir načina rada sustava

Koristite SUSTAV switch at the bottom of the thermostat to select the operating mode:

• HLAĐENJE: Aktivira sustav hlađenja kada temperatura u prostoriji poraste iznad zadane temperature.
• OFF: Isključuje i sustave grijanja i hlađenja.
• TOPLINA: Aktivira sustav grijanja kada temperatura u prostoriji padne ispod zadane temperature.

Odabir načina rada ventilatora

Koristite FAN switch at the bottom of the thermostat to select the fan operation mode:

• NA: Ventilator radi neprestano, bez obzira na to je li uključen sustav grijanja ili hlađenja.
• AUTOMOBIL: Ventilator radi samo kada je aktivno uključen sustav grijanja ili hlađenja.

Kalibracija temperature

The thermostat allows for temperature calibration to ensure accurate readings. Refer to the full installation manual for detailed steps on how to access and adjust this setting.

Zaštita od kašnjenja kompresora

This thermostat includes a built-in 3-minute compressor delay protection. This feature helps prevent short cycling of the compressor, extending the lifespan of your HVAC system. This function is selectable ON or OFF.

Separate Heating and Cooling Swing (Cycle Rate)

This image shows the Mroinge M701 thermostat display indicating a "Cool Swing" setting of "0.4°F". This setting defines the temperature differential before the system activates.

The swing setting, also known as cycle rate or differential, determines the temperature range within which the thermostat will activate the heating or cooling system. A smaller swing setting results in more frequent cycles, while a larger swing setting leads to fewer cycles. The factory default for both heating and cooling swing is 0.4°F.

Održavanje

Zamjena baterije

When the low battery indicator appears on the display, replace the 2 AAA alkaline batteries.

1. To replace batteries, gently pull the front cover of the thermostat forward to access the battery compartment.
2. Umetnite nove baterije, pazeći na pravilan polaritet.
3. Snap the front cover back into place.

Čišćenje

Očistite vanjski dio termostata mekom,amp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.

Rješavanje problema

Ako problemi potraju i nakon što ste isprobali ova rješenja, obratite se korisničkoj podršci.

Tehnički podaci

Jamstvo i podrška

Informacije o jamstvu

This Mroinge M701 Thermostat comes with a Jamstvo 2 godine od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalu i izradi pri normalnoj uporabi.

Zadržite svoj dokaz o kupnji za jamstvene zahtjeve.

Korisnička podrška

For technical assistance, troubleshooting, or warranty inquiries, please contact Mroinge customer support. Refer to the contact information provided with your product packaging or visit the official Mroinge webmjesto.

Visit the Mroinge Store on Amazon za više informacija o proizvodu.