Wipcool Double Stage Vakuumska pumpa 2F3R Korisnički priručnik

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Wipcool Double Stage Vacuum Pump Model 2F3R. Please read this manual thoroughly before operating the pump and retain it for future reference.

The Wipcool 2F3R vacuum pump is specifically designed for use with various refrigerants, including next-generation A2L refrigerants like R32 and R1234YF, as well as traditional refrigerants such as R410A and R22. Its design incorporates features for enhanced safety and performance in HVAC applications.

2. Sigurnosne upute

Always adhere to the following safety precautions to prevent injury and damage to the equipment.

• Električna sigurnost: Provjerite da napajanje odgovara volumenu pumpetage (230 Volts). Do not operate with damaged cords or plugs. Always disconnect power before servicing.
• Kompatibilnost rashladnog sredstva: This pump is suitable for A2L refrigerants (R32, R1234YF) and other common refrigerants (R410A, R22). When working with flammable refrigerants (A2L), ensure proper ventilation and eliminate all potential ignition sources.
• Razina ulja: Regularly check the oil level using the sight glass. Do not operate the pump without oil or when the oil level is low. Use only recommended vacuum pump oil.
• Ventilacija: Operate the pump in a well-ventilated area to prevent the accumulation of refrigerant vapors.
• Osobna zaštitna oprema (PPE): Wear appropriate PPE, including safety glasses and gloves, when handling refrigerants and operating the pump.
• Rukovanje: The pump weighs approximately 9.8 kg. Lift with care to avoid injury.
• Uvjeti okoliša: Avoid operating the pump in wet or excessively dusty environments.

3. Sadržaj paketa

Prilikom raspakiranja provjerite jesu li svi predmeti prisutni i neoštećeni:

• Wipcool Double Stage Vacuum Pump 2F3R
• Korisnički priručnik (ovaj dokument)
• Kabel za napajanje
• Vacuum Pump Oil (may be included separately or pre-filled)

4. Značajke proizvoda

The Wipcool 2F3R vacuum pump incorporates several advanced features for reliable performance:

• Non-Sparking Design: Suitable for use with A2L refrigerants (R32, R1234YF) and other refrigerants (R410A, R22).
• Tehnologija motora bez četkica: Offers a lighter design (over 25% lighter than similar products) and extended service life.
• Built-in Solenoid Valve: Prevents oil backflow into the system during power outages or shutdown.
• Overhead Vacuum Gauge: Provides a compact and easy-to-read display of vacuum levels.
• Integral Cylinder Structure: Povećava pouzdanost i trajnost.
• Reinforced Aluminum Alloy Oil Tank: Designed for effective heat dissipation and resistance to chemical corrosion.
• Oversized Sight Glass: Allows for easy monitoring of oil color and level.

5. Postavljanje

1. Raspakiranje: Carefully remove the vacuum pump from its packaging. Inspect for any shipping damage.
2. Plasman: Place the pump on a stable, level surface in a well-ventilated area. Ensure adequate space around the pump for air circulation and heat dissipation.
3. Punjenje uljem:
   • Skinite čep za punjenje ulja.
   • Pour appropriate vacuum pump oil into the reservoir until the level is between the MIN and MAX marks on the sight glass. Do not overfill.
   • Čvrsto vratite čep za punjenje ulja.
4. Priključak za napajanje: Connect the power cord to the pump and then to a grounded electrical outlet matching the specified voltage (230 V).
5. Početna provjera: Before connecting to a system, briefly turn on the pump to ensure it operates smoothly and the oil circulates. Turn off immediately.

6. Upute za rad

Follow these steps for proper operation of the vacuum pump:

1. Spojite se na sustav: Connect the vacuum pump to the system requiring evacuation using appropriate vacuum hoses. Ensure all connections are tight to prevent leaks.
2. Ventili otvorenog sustava: Otvorite sve ventile na manometru razvodnika i sustavu koji treba evakuirati.
3. Pumpa za pokretanje: Turn on the power switch of the vacuum pump. The pump will begin to draw a vacuum.
4. Praćenje vakuuma: Observe the overhead vacuum gauge to monitor the vacuum level. Continue operation until the desired vacuum level is achieved, typically indicated by a stable reading.
5. Isolate Pump: Once the desired vacuum is reached, close the manifold gauge set valves to isolate the system from the pump.
6. Isključite pumpu: Isključite vakuum pumpu.
7. Prekini vezu: Carefully disconnect the vacuum hoses from the pump and the system.

7. Održavanje

Regular maintenance ensures optimal performance and extends the life of your vacuum pump.

• Promjena ulja: Change the vacuum pump oil regularly, especially after each use with contaminated systems or when the oil appears discolored or cloudy.
  • Provjerite je li pumpa isključena i ohlađena.
  • Postavite odgovarajuću posudu ispod čepa za ispuštanje ulja.
  • Remove the oil drain plug and the oil fill cap to allow oil to drain completely.
  • Replace the drain plug and refill with new, clean vacuum pump oil to the correct level.
• Čišćenje: Keep the exterior of the pump clean and free of dust and debris. Ensure cooling fins are not obstructed.
• Skladištenje: When not in use, store the pump in a dry, clean environment. Ensure the oil level is correct before storage.

8. Rješavanje problema

9. Specifikacije

10. Jamstvo i podrška

This Wipcool 2F3R Double Stage Vacuum Pump comes with a 1 godina jamstva od datuma kupnje.

For warranty claims, technical support, or service inquiries, please contact your authorized Wipcool dealer or the manufacturer's customer service department. Please have your model number (2F3R) and proof of purchase available when contacting support.