Ving 24-inch Automatic DTF Powder Shaker and Dryer Instruction Manual

1. Uvod

This manual provides comprehensive instructions for the safe and efficient operation, setup, and maintenance of the Ving 24-inch Automatic DTF Powder Shaker and Dryer. This unit is designed to automate the direct-to-film (DTF) transfer printing process by evenly spreading and melting adhesive powder onto printed images, streamlining production for T-shirt and other textile applications.

Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera:

• Uvjerite se da je stroj postavljen na stabilnu, ravnu površinu.
• Spojite uređaj na uzemljenu utičnicu s ispravnim naponomtage.
• Tijekom rada držite ruke i labavu odjeću podalje od pokretnih dijelova.
• Ne koristite stroj u damp ili vlažnim uvjetima.
• Turn off and unplug the machine before performing any maintenance or cleaning.
• Use appropriate personal protective equipment (PPE) such as gloves and masks when handling DTF powder.
• Ensure adequate ventilation in the work area to dissipate fumes from the drying process.

3. Proizvod je gotovview

The Ving 24-inch Automatic DTF Powder Shaker and Dryer integrates several functions to automate the DTF transfer process:

• Vacuum Absorption Conveying Platform: Secures the printing material to prevent bulging and ensure consistent powder application.
• Automatic Powder Dispenser: Evenly spreads adhesive powder onto the printed film.
• Paddle System: Removes excess powder from the film.
• Infrared Drying and Heating Tunnel: Features 4 bulbs for efficient melting and curing of the adhesive powder, enhancing color reproduction.
• Warming Inlet Platform: Prepares the film for optimal powder adhesion.
• Touch Screen Display Controller: Provides a user-friendly interface for machine control.
• Roll-up Mechanism: Collects the finished film.

Slika 3.1: Prednja strana view of the Ving 24-inch Automatic DTF Powder Shaker and Dryer, showing the overall machine structure.

Slika 3.2: Bočna strana view of the machine, highlighting the integrated touch screen control panel.

Figure 3.3: The DTF Shaker and Dryer integrated into a typical printing workshop environment.

4. Postavljanje

1. Raspakiranje: Carefully remove the machine from its packaging. Inspect for any shipping damage. Report any damage to the carrier immediately.
2. Plasman: Position the machine on a sturdy, level surface capable of supporting its weight. Ensure there is sufficient space around the machine for operation, maintenance, and ventilation.
3. Priključak za napajanje: Connect the power cord to the machine and then to a grounded electrical outlet that meets the specified voltage zahtjevi.
4. Powder Loading: Open the powder dispenser compartment and carefully pour the DTF adhesive powder into the designated reservoir. Ensure the powder is dry and free of clumps.
5. Učitavanje filma: Load the DTF film roll onto the input spindle, ensuring it feeds smoothly onto the vacuum absorption conveying platform.
6. Početno uključivanje: Turn on the main power switch. The touch screen display should illuminate.

5. Upute za rad

Follow these steps for the DTF transfer printing process using the Ving Automatic DTF Powder Shaker and Dryer:

1. Pripremite svoj dizajn: Create or select your design using appropriate graphic software.
2. Print onto DTF Film: Print your design onto the DTF film using a compatible DTF printer. Ensure the print is wet when it enters the shaker unit.
3. Automatic Powder Shaking: As the wet printed film enters the shaker unit, the automatic powder dispenser will apply an even layer of adhesive powder. The paddle system will then remove excess powder.
4. Baking/Curing: The film with the applied powder will then pass through the infrared drying and heating tunnel. The heat will melt and cure the adhesive powder onto the ink.
5. Heat Press Application: Once the film exits the dryer and cools, it is ready for heat pressing onto your desired garment or substrate.
6. Završna obrada: Peel the transfer film from the garment after heat pressing according to the film manufacturer's instructions.

Figure 5.1: Visual representation of the DTF printing workflow, from design creation to final product.

Slika 5.2: Interno view of the drying tunnel, illustrating the infrared heating elements and the conveyor belt system.

Slika 5.3: View of the powder collection and distribution system within the shaker unit.

6. Održavanje

Regular maintenance ensures optimal performance and longevity of your DTF Powder Shaker and Dryer.

• Dnevno čišćenje: After each use, clean any residual powder from the conveying platform, powder dispenser, and paddle system. Use a soft, dry cloth or brush.
• Powder Management: DTF powder shakers typically do not have an automatic powder recycling function. Regularly inspect and remove any excess powder to prevent moisture absorption, which can lead to clumping and poor application. Store unused powder in a dry, sealed container.
• Conveyor Belt Inspection: Periodically check the conveyor belt for wear, tears, or misalignment. Clean the belt to remove any adhesive residue.
• Provjera grijaćeg elementa: Ensure the infrared heating bulbs are clean and functioning correctly. Replace any burnt-out bulbs as needed.
• Opća inspekcija: Regularly inspect all electrical connections and moving parts for any signs of wear or damage.

Važna napomena:

This DTF powder shaker model does not feature an automatic powder recycling function. Manual removal and proper storage of excess powder are essential to prevent moisture absorption and maintain powder quality.

7. Rješavanje problema

8. Specifikacije

• Model: B0CFQNQ5FN
• Marka: Ving
• Vrsta stroja: Automatic DTF Powder Shaker and Dryer
• Maximum Film Width: Approximately 24 inches (based on product title)
• Metoda sušenja: Infrared Heating (4 bulbs)
• Kontrolno sučelje: Zaslon osjetljiv na dodir
• Conveying System: Vacuum Absorption Platform
• Applicable Mediums: Nylon, Chemical Fiber, Cotton, Leather, Swimsuit, Diving Suit, PVC, EVA, etc.
• Proizvođač: Prijava-u-Kini
• Datum prve dostupnosti: 15. kolovoza 2023

Slika 8.1: Npramples of various materials and finished products that can be customized using DTF transfer printing, including canvas bags, hats, pillows, T-shirts, hoodies, pants, socks, and masks.

9. Jamstvo i podrška

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your vendor. Please have your model number (B0CFQNQ5FN) and date of purchase ready when contacting support.