SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8 User Manual

1. Uvod

This manual provides essential instructions for the safe and effective use of your SHARP AQUOS Sound Partner Bluetooth Neck Speaker AN-SX8. Please read this manual thoroughly before using the product and retain it for future reference. This device is designed to deliver a personal audio experience while allowing you to remain aware of your surroundings.

2. Proizvod je gotovview

The SHARP AQUOS Sound Partner AN-SX8 is a wireless neck speaker designed for comfortable, immersive audio. It features Bluetooth connectivity for wireless audio streaming and an AUX input for wired connections. Its lightweight design allows for extended wear.

Slika 1: SHARP AQUOS Sound Partner AN-SX8 Neck Speaker. This image displays the black, U-shaped neck speaker with control buttons visible on the top surface of the speaker units.

3. Postavljanje

3.1 Punjenje uređaja

Before initial use, fully charge the AN-SX8. Connect the provided USB charging cable to the charging port on the device and to a USB power adapter (not included) or a computer's USB port. The charging indicator light will illuminate during charging and turn off or change color when charging is complete.

3.2 Uključivanje/isključivanje

• To power on: Press and hold the Power button for approximately 3 seconds until the indicator light flashes.
• Za isključivanje: Pritisnite i držite gumb za napajanje otprilike 3 sekunde dok se indikatorska lampica ne ugasi.

3.3 Početno uparivanje putem Bluetootha

1. Ensure the AN-SX8 is powered off.
2. Pritisnite i držite gumb za uključivanje/isključivanje otprilike 5-7 sekundi dok indikatorska lampica ne počne brzo treptati, što označava način rada za uparivanje.
3. On your Bluetooth-enabled device (smartphone, tablet, TV), go to the Bluetooth settings and search for available devices.
4. Select "AN-SX8" from the list of found devices.
5. Once connected, the indicator light on the AN-SX8 will stop flashing rapidly and may glow steadily or flash slowly.

4. Upute za rad

4.1 Bluetooth veza

After initial pairing, the AN-SX8 will automatically attempt to connect to the last paired device when powered on. If it does not connect automatically, manually select "AN-SX8" from your device's Bluetooth settings.

4.2 AUX veza

To use a wired connection, connect one end of a 3.5mm audio cable (not included) to the AUX input port on the AN-SX8 and the other end to the audio output jack of your device. The device will automatically switch to AUX mode when a cable is detected.

4.3 Kontrola glasnoće

• Pritisnite tipku Pojačavanje glasnoće (+) gumb za povećanje glasnoće.
• Pritisnite tipku Smanjivanje glasnoće (-) gumb za smanjenje glasnoće.

4.4 Playback Control (Bluetooth Mode)

• Pritisnite tipku Reprodukcija/Pauza button once to play or pause audio.
• Dvaput pritisnite tipku Reprodukcija/Pauza gumb za prelazak na sljedeću pjesmu.
• Triput pritisnite Reprodukcija/Pauza gumb za povratak na prethodnu pjesmu.

4.5 Upravljanje pozivima (Bluetooth način rada)

• Pritisnite tipku Reprodukcija/Pauza pritisnite jednom za odgovor na dolazni poziv.
• Pritisnite tipku Reprodukcija/Pauza jednom tijekom poziva da biste ga prekinuli.
• Pritisnite i držite Reprodukcija/Pauza 2 sekunde za odbijanje dolaznog poziva.

5. Održavanje

5.1 Čišćenje

Wipe the device with a soft, dry cloth. Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the surface. Avoid getting moisture into any openings.

5.2 Skladištenje

When not in use for extended periods, store the device in a cool, dry place away from direct sunlight and extreme temperatures. Fully charge the battery before storing and recharge it every few months to maintain battery health.

5.3 Njega baterija

The AN-SX8 contains a built-in rechargeable battery. Do not attempt to replace the battery yourself. Avoid exposing the device to extreme heat or cold, as this can shorten battery life. Dispose of the battery according to local regulations.

6. Rješavanje problema

• Bez napajanja: Provjerite je li uređaj potpuno napunjen. Spojite ga na izvor napajanja i provjerite indikator punjenja.
• Nema zvuka:
  • Check the volume level on both the AN-SX8 and your connected device.
  • Ensure the device is correctly paired via Bluetooth or the AUX cable is securely connected.
  • If using Bluetooth, try disconnecting and re-pairing the device.
• Problemi s Bluetooth vezom:
  • Ensure the AN-SX8 is in pairing mode or discoverable.
  • Move the AN-SX8 closer to your Bluetooth device.
  • Turn off and on Bluetooth on your source device.
  • Clear the AN-SX8 from your device's Bluetooth list and re-pair.
• Izobličen zvuk:
  • Reduce the volume on both the AN-SX8 and your connected device.
  • Ensure there are no obstructions or interference between the AN-SX8 and your Bluetooth device.
  • Provjerite izvor zvuka ima li problema s kvalitetom.

7. Specifikacije

8. Sigurnosne informacije

• Ne izlažite uređaj vodi, vlazi ili ekstremnim temperaturama.
• Izbjegavajte dugotrajno slušanje na velikoj glasnoći kako biste spriječili oštećenje sluha.
• Ne pokušavajte rastaviti, popraviti ili modificirati uređaj.
• Čuvati izvan dohvata djece i kućnih ljubimaca.
• Dispose of the device and its battery responsibly according to local environmental regulations.

9. Jamstvo i podrška

For warranty information and technical support, please refer to the official SHARP website or contact SHARP customer service. Keep your proof of purchase for warranty claims. Specific warranty terms may vary by region.

Za dodatnu pomoć posjetite SHARP Support Webmjesto (npramppoveznica, stvarna poveznica može se razlikovati).