Conentool 21V bežični udarni bušilica/odvijač - korisnički priručnik

1. Uvod

Thank you for choosing the Conentool 21V Cordless Impact Drill/Driver Kit. This tool is designed for various drilling and screwdriving tasks in wood, metal, plastics, and masonry. Please read this manual carefully before operating the tool to ensure safe and efficient use. Keep this manual for future reference.

Image 1.1: The Conentool 21V Cordless Impact Drill/Driver Kit, including the drill, two 2500mAh batteries, charger, and a variety of drill bits and accessories in a carrying case.

2. Opće sigurnosne upute

UPOZORENJE: Pročitajte sva sigurnosna upozorenja, upute, ilustracije i specifikacije isporučene s ovim električnim alatom. Nepoštivanje svih dolje navedenih uputa može dovesti do strujnog udara, požara i/ili ozbiljne ozljede.

2.1 Sigurnost radnog područja

• Održavajte radni prostor čistim i dobro osvijetljenim. Neuredna ili tamna područja izazivaju nezgode.
• Nemojte raditi s električnim alatima u eksplozivnim atmosferama, poput prisutnosti zapaljivih tekućina, plinova ili prašine. Električni alati stvaraju iskre koje mogu zapaliti prašinu ili pare.
• Držite djecu i promatrače podalje dok radite s električnim alatom. Smetnje mogu uzrokovati gubitak kontrole.

2.2 Električna sigurnost

• Utikač električnog alata mora odgovarati utičnici. Nikada ni na koji način ne mijenjajte utikač.
• Izbjegavajte kontakt tijela s uzemljenim površinama, kao što su cijevi, radijatori, štednjaci i hladnjaci. Postoji povećan rizik od strujnog udara ako je vaše tijelo uzemljeno.
• Ne izlažite električne alate kiši ili vlažnim uvjetima. Ulazak vode u električni alat povećava rizik od strujnog udara.

2.3 Osobna sigurnost

• Uvijek nosite zaštitu za oči. Koristite zaštitne naočale, zaštitne naočale ili vizir za lice.
• Nosite zaštitu za sluh prilikom duljeg rada s alatom.
• Odjenite se kako treba. Ne nosite široku odjeću ili nakit. Držite kosu i odjeću dalje od pokretnih dijelova.
• Budite oprezni, pazite što radite i koristite zdrav razum kada radite s električnim alatom.

3. Sadržaj paketa

Provjerite jesu li svi dolje navedeni artikli uključeni u vaš paket. Ako neki artikli nedostaju ili su oštećeni, obratite se korisničkoj podršci.

• 1 x Conentool 21V Cordless Impact Drill/Driver
• 2 x 2500mAh litij-ionske baterije
• 1 x punjač baterije
• 1 x Produžetak fleksibilne osovine
• Various Drill Bits (for wood, metal, masonry)
• Razni nastavci odvijača
• Adapteri za utičnice
• Torba za nošenje
• korisnički priručnik

Image 3.1: A complete overview of the kit contents, including the drill, two batteries, charger, flexible shaft, various drill bits, screwdriver bits, and socket adapters, all neatly arranged.

4. Proizvod je gotovview

Familiarize yourself with the main components of your drill/driver:

1. Chuck: Drži svrdla i odvijače.
2. Prsten za podešavanje momenta: Selects the desired torque setting.
3. Prsten za odabir načina rada: Switches between screwdriving, drilling, and impact drilling modes.
4. Prekidač za odabir brzine: Changes between high and low-speed gears.
5. Prekidač okidača: Activates the tool and controls speed (variable speed).
6. Selektor naprijed/natrag: Mijenja smjer rotacije.
7. LED radno svjetlo: Osvjetljava radno područje.
8. Pakovanje baterija: Osigurava napajanje alata.
9. Gumb za otpuštanje baterije: Za vađenje baterije.
10. Ručka: Ergonomski rukohvat za udobnu upotrebu.

Slika 4.1: Unutarnji view highlighting the brushless motor, which provides increased power, efficiency, and a quieter operation with no sparks.

5. Postavljanje

5.1 Punjenje baterije

The battery pack is not fully charged at the time of purchase. It is recommended to fully charge the battery before first use.

1. Spojite punjač na standardnu ​​utičnicu.
2. Slide the battery pack onto the charger base. Ensure it clicks into place.
3. The charger indicator light will show the charging status. A red light typically indicates charging, and a green light indicates a full charge.
4. Nakon potpunog punjenja isključite punjač iz utičnice i izvadite bateriju.

Image 5.1: The battery charger connected to a wall outlet, with a battery pack inserted for charging. The red light indicates charging, and the green light indicates a completed charge.

5.2 Ugradnja i uklanjanje baterije

• Instalirati: Poravnajte baterijski blok s bazom drške alata i gurnite ga unutra dok ne klikne sigurno na svoje mjesto.
• Za uklanjanje: Press the battery release button (usually located at the front of the battery) and slide the battery pack out of the tool.

Slika 5.2: Presjek view of the 2500mAh battery pack, illustrating its internal lithium-ion cells and power management system, designed for up to 90 minutes of use per battery.

5.3 Installing and Removing Drill/Screwdriver Bits

• Instalirati: Rotate the chuck counter-clockwise to open the jaws. Insert the desired bit into the chuck as far as it will go. Rotate the chuck clockwise to tighten the jaws firmly around the bit.
• Za uklanjanje: Rotate the chuck counter-clockwise to loosen the jaws and pull the bit out.

Ensure the bit is securely fastened to prevent it from slipping during operation.

Slika 5.3: Detaljan view of the self-locking metal chuck, demonstrating its stable clamping mechanism capable of holding drill bits up to 13mm securely.

6. Upute za rad

6.1 Uključivanje/isključivanje i kontrola brzine

• To turn the tool ON, press the trigger switch. The speed is variable; press the trigger further for higher speed.
• Za isključivanje alata otpustite okidač.
• Integrirano LED radno svjetlo će se osvijetliti kada se pritisne okidač, pružajući vidljivost u slabo osvijetljenim područjima.

6.2 Rotacija naprijed/natrag

The forward/reverse selector switch is located above the trigger. Push it to the left for forward rotation (for screwdriving and drilling) and to the right for reverse rotation (for removing screws or freeing jammed bits). Ensure the tool is stopped before changing direction.

6.3 Odabir brzine

The drill features a 2-speed gear selector switch on top of the tool:

• Gear 1 (Low Speed, 0-650 RPM): Idealno za primjene s visokim okretnim momentom poput uvrtanja velikih vijaka ili bušenja velikih rupa.
• Gear 2 (High Speed, 0-1850 RPM): Suitable for fast drilling in softer materials and smaller diameter holes.

Always select the appropriate gear for the task. Change gears only when the tool is completely stopped.

Image 6.1: An illustration demonstrating the two-speed gear settings: Gear 1 (0-650 RPM) for screwdriving and Gear 2 (0-1850 RPM) for drilling, allowing for optimal performance based on the application.

6.4 Torque Adjustment and Mode Selection

The torque adjustment ring allows you to set the desired torque for screwdriving applications, preventing overtightening or stripping screws. The mode selector ring allows you to switch between different operating modes.

• Screwdriving Mode (Torque Settings 1-35): Use these settings to match the torque to the screw size and material. Lower numbers for smaller screws/softer materials, higher numbers for larger screws/harder materials.
• Način bušenja (Ikona svrdla): For general drilling without impact. The clutch is disengaged, providing maximum torque.
• Način udarnog bušenja (Ikona čekića): For drilling into masonry or concrete, providing a hammering action in addition to rotation.

The drill offers 35+3 settings, including 35 torque settings for screwdriving and 3 modes (screwdriving, drilling, impact drilling).

Image 6.2: A visual representation of the 35+3 torque and mode settings, indicating precise power control and a maximum torque of 55 N.m, suitable for various materials like wood, brick, plastic, and metal.

7. Održavanje

7.1 Čišćenje

• Uvijek odspojite baterijski sklop prije bilo kakvog čišćenja ili održavanja.
• Održavajte ventilacijske otvore alata čistima kako biste spriječili pregrijavanje.
• Koristite meku, damp krpa za čišćenje alata casing. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.

7.2 Skladištenje

• Alat i baterije čuvajte na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i vlage.
• Alat spremite u njegovu torbicu za nošenje kako biste ga zaštitili od prašine i oštećenja.
• Čuvati izvan dohvata djece.

Image 7.1: A person carrying the Conentool drill kit in its durable black carrying case, designed for convenient storage and transport of the tool and its accessories.

7.3 Njega baterija

• Ne skladištite baterije u ispražnjenom stanju. Redovito ih punite, posebno ako se ne koriste dulje vrijeme.
• Izbjegavajte izlaganje baterija ekstremnim temperaturama.
• Ne pokušavajte rastaviti ili modificirati bateriju.

8. Rješavanje problema

9. Specifikacije

10. Jamstvo i podrška

Conentool products are manufactured to high-quality standards. In the unlikely event of a defect due to material or manufacturing fault, please contact your retailer or Conentool customer service. Please retain your proof of purchase for warranty claims.

For further assistance, technical support, or to inquire about spare parts, please refer to the contact information provided with your purchase or visit the official Conentool webmjesto.