OMTech 60W CO2 Laser Engraver (28x20 Inch) Instruction Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of your OMTech 60W CO2 Laser Engraver. Please read all instructions carefully before operating the machine. This laser engraving and cutting machine is designed for precision work on various non-metallic materials such as wood, glass, and leather.

2. Sigurnosne informacije

Laserska klasa 2: This device is a Class 2 laser product with 0.827 mW output power. Always follow safety guidelines to prevent injury.

• Zaštita očiju: Never look directly into the laser beam. Always use appropriate laser safety glasses.
• Ventilacija: Ensure adequate ventilation to remove smoke and fumes generated during operation. The built-in air assist helps, but additional external ventilation may be required.
• Zaštita od požara: Držite aparat za gašenje požara u blizini. Ne ostavljajte stroj bez nadzora tijekom rada, posebno pri radu sa zapaljivim materijalima.
• Kompatibilnost materijala: Only engrave or cut materials approved for CO2 lasers. Avoid materials that produce toxic fumes or are highly flammable.
• Prilog: The widened viewing window is made from flame retardant material for safe observation. Keep the lid closed during operation.
• Hitno zaustavljanje: Upoznajte se s položajem i radom tipke za zaustavljanje u nuždi.

3. Značajke proizvoda

• High-Performance CO2 Laser Tube: Equipped with a 60W DC laser tube, offering up to 1,000 hours of usage, with extended lifespan at lower power settings.
• Veliko radno područje: Features a 20"x28" (500x700 mm) work area, accommodating a wide range of projects.
• Motorized Workbed (Autolift): Easily adjust the workbed height with the touch of a button for focusing on materials of various thicknesses.
• Four-Way Pass-Through Doors: Designed to handle larger and longer items by allowing material to pass through the machine.
• Dual Engraving Beds: Includes both honeycomb and aluminum blade beds for versatile material support.
• Integrirana zračna pomoć: Efficiently removes smoke and dust, protecting laser lenses and reflective mirrors, and improving engraving quality.
• Digitalna upravljačka ploča: Compatible with feature-packed software like LightBurn, CorelDRAW, and AutoCAD for convenient operation.
• Safe Observation Window: proširen viewing window made from flame-retardant material for monitoring the engraving process safely.

4. Postavljanje

Before initial operation, ensure the machine is placed on a stable, level surface in a well-ventilated area. Connect all necessary components as per the included quick start guide.

4.1 Raspakiranje i postavljanje

• Carefully remove the laser engraver from its packaging.
• Place the machine in a location with sufficient space around it for ventilation and access.
• Osigurajte da u području nema zapaljivih materijala.

4.2 Spajanje perifernih uređaja

• Connect the water pump to the laser tube for cooling. Ensure the water reservoir is filled with distilled water.
• Attach the air assist pump and exhaust fan to their respective ports.
• Connect the machine to a power source using the provided power cable.
• Connect the machine to your computer via USB, Ethernet, or use a USB flash drive for offline operation.

4.3 Instalacija softvera

• Install the recommended laser control software (e.g., LightBurn) on your computer.
• Follow the software's instructions for driver installation and machine configuration.

5. Upute za rad

5.1 Priprema za graviranje/rezanje

• Place your material on the appropriate workbed (honeycomb for small items, blade for larger items).
• Use the motorized workbed controls to adjust the material height for optimal laser focus.
• Ensure the material is flat and secured to prevent movement during operation.

5.2 Rad softvera

• Import or create your design in the laser software.
• Set the appropriate laser power, speed, and other parameters based on your material and desired effect. Refer to material testing guides for starting points.
• Koristite softverske preduvjeteview function to verify the job path before starting.

5.3 Starting the Job

• Close the machine lid securely.
• Initiate the job from the software or the machine's digital control panel.
• Monitor the process through the flame-retardant viewing prozor.

6. Održavanje

Redovito održavanje osigurava optimalne performanse i produžuje vijek trajanja vašeg laserskog gravera.

• Očistite leće i zrcala: Regularly clean the laser lenses and reflective mirrors with appropriate cleaning solutions and wipes to maintain beam quality.
• Sustav vodenog hlađenja: Periodically check and replace the water in the cooling system. Ensure the water pump is functioning correctly to prevent overheating of the laser tube.
• Čišćenje radne površine: Clean the honeycomb and blade beds to remove debris and residue that can affect material placement and laser performance.
• Podmazivanje: Lubricate moving parts (rails, bearings) as recommended by the manufacturer to ensure smooth operation.
• Ispušni sustav: Inspect and clean the exhaust fan and ducting to ensure efficient smoke and fume extraction.

7. Rješavanje problema

8. Specifikacije

• Marka: OMTech
• Model: 60W CO2 Laser Engraver (28x20 Inch)
• Vrsta lasera: CO2
• Snaga lasera: 60 W
• Radno područje: 500 x 700 mm
• Max Engraving Speed: Do 23.6 ips (600 mm/s)
• Max Engraving Depth: Up to 0.4" (10 mm) on various non-metallic materials
• Dimenzije stroja: 48.8 x 34.3 x 26.4 inča
• Težina artikla: 223 funti
• Prijenos podataka: USB Cable, Ethernet Cable, USB Flash Drive, Offline
• Laserska klasa: 2, 0.827 mW output power

9. Galerija medija

9.1 Slike proizvoda

9.2 Službeni videozapisi proizvoda

10. Jamstvo i podrška

For warranty information and technical support, please refer to the documentation included with your product or visit the official OMTech website. The product is sold by OMTech Direct.

Politika povrata: 30 dana za povrat/zamjenu.