Amazon Basics Adjustable Dual Computer Monitor Arm Mount

Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your Amazon Basics Adjustable Dual Computer Monitor Arm Mount. Please read this manual thoroughly before installation and retain it for future reference.

Sigurnosne informacije

• Prije sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Nemojte koristiti ako bilo koji dio nedostaje ili je neispravan.
• Verify that the mounting surface (desk) can safely support the combined weight of the mount and two monitors.
• Ne prekoračujte maksimalnu nosivost od 10 kg po ruci.
• Follow all installation steps carefully. Improper installation may result in product damage or personal injury.
• Tijekom instalacije držite podalje djecu i kućne ljubimce.

Sadržaj paketa

Provjerite jesu li svi dolje navedeni dijelovi uključeni u vaš paket:

• Središnji pol
• Monitor Arms (2)
• VESA Plates (2)
• C-Clamp Hardver za montažu
• Pribor za montažu ušica
• Isječci za upravljanje kabelima
• Assorted Screws and Tools for Assembly

Slika: A flat lay image displaying all components included in the package: the central pole, two monitor arms, VESA plates, desk mounting hardware (C-clamp and grommet parts), cable management clips, and various screws and tools.

Tehnički podaci

Slika: An image illustrating the wide compatibility of the monitor arm, highlighting a maximum weight capacity of 22 lbs (10 kg) per arm, VESA sizes of 75x75mm and 100x100mm, and support for screens up to 32 inches.

Postavljanje i instalacija

Držač monitora nudi dva načina ugradnje: C-clamp mount or grommet mount.

1. Odaberite opciju montaže

• C-Clamp Montaža: Ideal for desks without pre-drilled holes. Attaches to the edge of desks with a thickness between 0.39 and 4.25 inches (1 - 10.8 cm).
• Montaža ušice: Suitable for desks with existing holes. Requires a hole diameter between 0.51 and 2.36 inches (1.29 - 6 cm).

Slika: An image detailing the two installation options: a grommet mount for desks with a pre-drilled hole and a C-clamp mount for desk edges.

2. Sastavite bazu

1. Attach the central pole to your chosen base (C-clamp or grommet) according to the specific instructions provided in the hardware kit.
2. Securely fasten the base to your desk. Ensure it is tight and stable.

3. Pričvrstite nosače monitora

1. Slide the monitor arms onto the central pole.
2. Adjust the height of the arms to your desired position and tighten the locking mechanism.

4. Montirajte monitore

1. Attach the VESA plates to the back of your monitors using the provided screws. Ensure the screws are compatible with your monitor's VESA mounting holes (75x75mm or 100x100mm).
2. Carefully slide the monitors (with VESA plates attached) onto the monitor arms. Secure them in place with the locking screws.

Slika: The Amazon Basics Dual Monitor Arm Mount in black, showing the central pole, two adjustable arms, and VESA plates, ready for monitor attachment. The desk clamp is visible at the base.

Slika: A view from behind two monitors, showing them securely attached to the dual monitor arm mount, demonstrating a typical setup.

Operating and Adjusting the Monitor Arm

The monitor arm allows for flexible positioning of your screens to optimize your viewiskustvo.

Prilagodbe:

• Podešavanje visine: Loosen the locking mechanism on the central pole to slide the arms up or down. Retighten to secure.
• Nagib: Adjust the monitor's vertical angle from -45° to +90° to reduce glare and improve viewin udobnost.
• Zakretanje: Rotate the monitor +/-90° horizontally to share your screen or change viewing kutova.
• Rotacija: Pivot the monitor 360° to switch between landscape and portrait orientations.
• Ispruženje ruke: Extend or retract the arms up to 31.17 inches (79.17 cm) to bring monitors closer or push them further away.

Slika: An illustration demonstrating the flexible adjustment capabilities of the monitor arm, including 180-degree arm rotation, 360-degree pivot, tilt from -45° to +90°, +/-90° swivel, and 360° rotation for monitors.

Slika: Strana view of the monitor arm with a monitor attached, indicating key dimensions: 31.17 inches (79.17 cm) extension range, 18.09 inches (45.95 cm) arm length, and 16.75 inches (42.55 cm) height adjustment.

Uprava za kabele:

Utilize the included cable management clips to route and organize your monitor cables along the arms and pole. This helps maintain a tidy workspace and prevents cable damage.

Održavanje

• Čišćenje: Wipe the monitor arm with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Periodične provjere: Regularly check all screws and connections to ensure they remain tight and secure. Retighten as necessary.
• Podmazivanje: Za ovaj proizvod nije potrebno podmazivanje.

Rješavanje problema

Problem: Monitor arm is unstable or wobbles.

Otopina: Osigurajte radni stol clamp or grommet mount is securely tightened to the desk. Check that all connections on the arms and VESA plates are fastened properly. Verify that the monitor weight does not exceed the maximum capacity of 22 lbs (10 kg) per arm.

Problem: Monitor does not stay in desired position (e.g., tilts down).

Otopina: The tension for tilt or swivel might need adjustment. Refer to the specific instructions in your hardware kit for adjusting tension screws on the VESA plate or arm joints. Use the provided tools to tighten these adjustments until the monitor holds its position.

Problem: Difficulty in adjusting height.

Otopina: Loosen the height adjustment knob or lever on the central pole before attempting to move the arms. Ensure no cables are snagged, preventing movement. Retighten after adjustment.

Jamstvo i podrška

For warranty information or customer support, please refer to the documentation included with your purchase or visit the official Amazon Basics website. Contact information for customer service is typically available on the product packaging or the brand's support pages.