FLEX FX0421-Z

FLEX 24V 280W Lithium-Ion Battery Rapid Charger

Model: FX0421-Z

Uvod

Thank you for choosing the FLEX 24V 280W Lithium-Ion Battery Rapid Charger. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your charger. Designed for speed and durability, this charger ensures your FLEX 24V batteries are ready when you are, minimizing downtime with its advanced charging technology and dual fan cooling system.

Sigurnosne informacije

UPOZORENJE: Prije upotrebe ovog proizvoda pročitajte sva sigurnosna upozorenja i sve upute. Nepoštivanje upozorenja i uputa može uzrokovati strujni udar, požar i/ili ozbiljne ozljede.

  • Ne izlažite punjač kiši ili mokrim uvjetima. Voda koja ulazi u punjač baterije povećat će rizik od strujnog udara.
  • Use only with specified FLEX 24V Lithium-Ion battery packs. Charging other battery packs may cause them to burst, leading to personal injury and damage.
  • Do not charge damaged battery packs. If a battery pack is damaged, it must be replaced.
  • Keep the charger away from heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) koji proizvode toplinu.
  • Isključite punjač iz utičnice kada ga ne koristite ili prije čišćenja.
  • Do not operate the charger with a damaged cord or plug. If damaged, have it repaired by a qualified service person.
  • Nemojte rastavljati punjač. Odnesite ga kvalificiranom serviseru kada je potreban servis ili popravak. Nepravilno ponovno sastavljanje može dovesti do opasnosti od strujnog udara ili požara.

Proizvod gotovview

The FLEX 24V 280W Rapid Charger (FX0421-Z) is engineered for efficient and fast charging of your FLEX 24V batteries. Its robust design includes intelligent processing and dual fan cooling to optimize charging performance and battery longevity.

FLEX 24V 280W Rapid Charger

Slika 1: Od vrha prema dolje view of the FLEX 24V 280W Rapid Charger, showing the battery slot and indicator lights.

FLEX 24V 280W Rapid Charger with indicator lights

Slika 2: Kutno view of the FLEX 24V 280W Rapid Charger, highlighting the indicator panel.

Internal components of FLEX charger showing dual fan technology

Figure 3: Diagram illustrating the internal components of the FLEX charger, emphasizing the dual fan cooling system for faster charging.

FLEX battery technology features

Figure 4: Visual representation of FLEX battery technology, highlighting Therma-Tech™ Heat Management, Power IQ, and resistance to drop, dust, and water.

Ključne karakteristike:

  • 280W Rapid Charging: Delivers fast charging speeds for minimal downtime.
  • Dual Fan Technology: Actively cools the charger and battery during operation to prevent overheating and extend lifespan.
  • Smart Charge Gauge: Clear indicator lights show charging status (Full Charge, 80% Charge, Charging, High Temp/Error).
  • Battery Lock System: Ensures secure connection and prevents accidental disconnection.
  • Može se montirati na zid: Designed for convenient storage and accessibility.
  • FLEX 24V Cross-Compatibility: Works seamlessly with all FLEX 24V batteries and tools.

Postavljanje

  1. Raspakirajte punjač: Carefully remove the charger and any packaging materials from the box. Inspect for any damage.
  2. Plasman: Place the charger on a stable, flat, and dry surface. Ensure adequate ventilation around the charger. The charger can also be wall-mounted using appropriate fasteners (not included) through the designated mounting holes on the back.
  3. Spojite na napajanje: Plug the charger's power cord into a standard 120V AC electrical outlet. The indicator lights may briefly illuminate upon connection.

Upute za rad

Punjenje baterije:

  1. Provjerite je li punjač uključen u aktivnu utičnicu.
  2. Align the FLEX 24V battery pack with the charging slot on the charger.
  3. Slide the battery pack firmly into the slot until it clicks securely into place. The battery lock system will engage.
  4. The charger's indicator lights will illuminate to show the charging status. The cooling fans may activate during charging.
  5. Nakon što je punjenje završeno, zasvijetlit će indikator 'Potpuno punjenje'.
  6. To remove the battery, press the release tabs on the sides of the battery pack and slide it out of the charger.

Svjetla indikatora punjenja:

Indikator Status
Zelena (čvrsta) Potpuno punjenje
Zelena (treperi) 80% punjenje
Green (Scrolling) Punjenje
Crvena (puna) High Temperature / Error

Približno vrijeme punjenja:

FLEX 280W Rapid Charger approximate charging times

Figure 5: Table showing approximate charging times for various FLEX 24V Lithium-Ion batteries.

  • 24V 2.5Ah Lithium: Approximately 30 Minutes
  • 24V 5.0Ah Lithium: Approximately 30 Minutes
  • 24V 8.0Ah Lithium: Approximately 50 Minutes
  • 24V 12.0Ah Lithium: Approximately 75 Minutes

*Charging times may vary based on battery condition, ambient temperature, and power source.

Kompatibilnost proizvoda:

FLEX 24V tools and batteries cross-compatibility

Figure 6: An array of FLEX 24V tools and batteries, demonstrating their 100% cross-compatibility.

The FLEX 24V 280W Rapid Charger is designed to be 100% cross-compatible with all FLEX 24V batteries, chargers, and tools, ensuring a versatile and efficient power system for your projects.

Održavanje

  • Čišćenje: Disconnect the charger from the power supply before cleaning. Use a soft, damp cloth to wipe down the exterior of the charger. Do not use harsh chemicals, abrasive cleaners, or solvents, as these can damage the plastic components.
  • Skladištenje: Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure the charger is unplugged when not in use for extended periods.
  • Inspekcija: Periodically inspect the power cord and charger housing for any signs of damage. If any damage is found, do not use the charger and contact FLEX customer support for assistance.

Rješavanje problema

Problem Mogući uzrok Otopina
Punjač se ne uključuje No power to the outlet; Damaged power cord/plug Check if the outlet is live by plugging in another device. Inspect the power cord and plug for damage.
Battery not charging (no indicator lights) Battery not properly seated; Battery is too hot/cold; Battery is damaged Ensure the battery is fully inserted and clicks into place. Allow battery to reach room temperature (40°F - 104°F / 4°C - 40°C). If battery is damaged, replace it.
Red (Solid) indicator light High temperature or other error Remove the battery and allow both the battery and charger to cool down in a well-ventilated area. Reinsert the battery. If the error persists, contact customer support.

Tehnički podaci

  • Broj modela: FX0421-Z
  • Dimenzije proizvoda: 7.3 x 7.6 x 3.7 inča (18.5 x 19.3 x 9.4 cm)
  • Težina artikla: 2.33 funti (1.06 kg)
  • Izlazni voltage: 24 volti
  • Izlazna snaga: 280 W
  • Boja: Siva/Crna
  • Sukladnost: Certifikat Energy Star

Jamstvo i podrška

FLEX ograničeno doživotno jamstvo: Register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2025, at registermyFLEX.com to receive a limited lifetime warranty. Please refer to the official FLEX webmjesto za potpune uvjete i odredbe jamstva.

Korisnička podrška: For technical assistance, service, or replacement parts, please visit the official FLEX website or contact their customer service department. Always provide your product model number (FX0421-Z) when seeking support.

Službeni videozapisi proizvoda

Trenutno nisu dostupni službeni videozapisi proizvoda od prodavatelja za ovaj određeni model.

© 2024 FLEX. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.