ATTACK SHARK X3PRO 4K/8K Lagani bežični igraći miš Upute za uporabu

1. Proizvod je gotovview

The ATTACK SHARK X3PRO is a lightweight wireless gaming mouse designed for high-performance gaming. It features tri-mode connectivity (wired, 2.4GHz wireless, and Bluetooth 5.2), a Pixart PAW3395 optical sensor, and Kailh GM8.0 switches. This mouse supports up to 4K wireless polling rate and 8K wired polling rate, offering precise tracking and responsiveness.

Image 1.1: The ATTACK SHARK X3PRO Wireless Gaming Mouse highlighting its key features.

Image 1.2: The X3PRO mouse showcasing its ultra-light design, weighing approximately 49g.

2. Vodič za postavljanje

2.1 Sadržaj paketa

Prije nastavka, provjerite jesu li sve komponente prisutne:

• ATTACK SHARK X3PRO Wireless Gaming Mouse
• USB-C na USB-A kabel za punjenje/podatkovni kabel
• USB prijemnik od 2.4 GHz
• Type-C to USB-A Adapter
• korisnički priručnik

2.2 Početno punjenje

Connect the mouse to a USB power source using the provided USB-C cable. The mouse can be used in wired mode while charging.

2.3 Spajanje miša

The X3PRO supports three connection modes: 2.4GHz Wireless, Bluetooth 5.2, and Wired USB-C.

Slika 2.1: Detaljno view of the mouse's underside, showing the USB receiver storage and mode switch.

2.3.1 Bežični način rada od 2.4 GHz

1. Locate the 2.4GHz USB receiver stored in the compartment on the underside of the mouse (refer to Image 2.1).
2. Insert the USB receiver into an available USB-A port on your computer. For optimal signal, use the provided Type-C to USB-A adapter to position the receiver closer to the mouse if needed.
3. Slide the mode switch on the bottom of the mouse to the '2.4G' position. The mode indicator light will illuminate.
4. Vaše računalo bi trebalo automatski prepoznati miš.

2.3.2 Bluetooth 5.2 način rada

1. Slide the mode switch on the bottom of the mouse to the 'BT' position. The mode indicator light will flash, indicating pairing mode.
2. Na računalu idite na postavke Bluetootha i potražite nove uređaje.
3. Select 'ATTACK SHARK X3PRO' from the list of available devices to pair.

2.3.3 Wired USB-C Mode

1. Connect the provided USB-C cable to the front port of the mouse and the USB-A end to your computer.
2. Slide the mode switch on the bottom of the mouse to the 'OFF' position. The mouse will operate in wired mode.

Image 2.2: The mode switch and indicator lights on the underside of the mouse.

2.4 Instalacija upravljačkog programa

For full customization of DPI, polling rate, LOD (Lift-Off Distance), shortcuts, and macros, download and install the official ATTACK SHARK X3PRO driver software from the manufacturer's website. This software is compatible with Windows XP / VISTA / 7 / 8 / 10 / MAC operating systems.

3. Upute za rad

3.1 Podešavanje DPI

The mouse features a DPI button on its underside (refer to Image 2.1) to cycle through 6 adjustable DPI levels: 800, 1600, 2400, 3200, 5000, and 26000. The DPI indicator light will change color to reflect the current setting.

3.2 Stopa anketiranja

The X3PRO offers advanced polling rates for enhanced responsiveness:

• 4K Polling Rate (Wireless): In 2.4GHz wireless mode, the mouse can achieve a 4000Hz polling rate, sending signals to the computer every 0.25ms.
• 8K Polling Rate (Wired): In wired USB-C mode, the mouse can achieve an 8000Hz polling rate, sending signals to the computer every 0.125ms.

Higher polling rates reduce input lag, providing a more immediate response. For optimal 4K/8K polling rate performance, an Intel Core i5 or higher CPU, AMD Ryzen 5 or higher CPU, and a USB 3.0 or higher port are recommended.

Image 3.1: Polling rate comparison illustrating the reduced delay with higher frequencies.

3.3 Programabilni gumbi

The mouse features 5 programmable buttons. Utilize the official driver software to customize button functions, assign macros, and adjust other settings to suit your preferences.

3.4 Kailh GM8.0 Switches and TTC Encoder

The X3PRO is equipped with Kailh Black Mamba GM8.0 Micro switches, known for their crisp clicks, fast rebound, and an 80 million click lifespan. The TTC scroll wheel encoder provides precise scrolling and tactile feedback.

Slika 3.2: Unutarnje view showing the Kailh GM8.0 switches and TTC encoder.

4. Održavanje

4.1 Čišćenje

Za održavanje optimalnih performansi i higijene redovito čistite miš. Za brisanje površine koristite meku, suhu krpu. Za tvrdokornu prljavštinu, laganoamp Može se koristiti krpa s blagim sapunom, pazeći da tekućina ne uđe u unutarnje komponente miša. Izbjegavajte abrazivna sredstva za čišćenje ili otapala.

4.2 Njega baterija

The X3PRO is designed for long battery life, offering up to 68 hours of continuous use. To prolong battery lifespan:

• Izbjegavajte često potpuno pražnjenje baterije.
• Miš čuvajte na sobnoj temperaturi kada se ne koristi dulje vrijeme.
• Napunite miš pomoću priloženog USB-C kabela.

Image 4.1: The X3PRO mouse emphasizing its extended battery life.

4.3 PTFE stopala

The mouse is equipped with 100% virgin grade PTFE feet, which provide a consistent and smooth glide. Keep the PTFE feet clean and free of debris to maintain optimal movement. Replacement feet may be available from the manufacturer if wear occurs.

Image 4.2: The underside of the mouse, showing the low-friction PTFE feet.

5. Rješavanje problema

5.1 Miš ne reagira

• Provjerite bateriju: Ensure the mouse has sufficient charge. Connect it via USB-C cable to charge.
• Provjerite vezu:
  • 2.4 GHz bežično: Ensure the USB receiver is securely plugged into a working USB port and the mouse is switched to '2.4G' mode. Try a different USB port. If experiencing jitteriness or signal loss, try moving the receiver closer to the mouse, potentially using the Type-C to USB-A adapter.
  • Bluetooth: Verify Bluetooth is enabled on your computer and the mouse is correctly paired and switched to 'BT' mode. Try re-pairing the device.
  • Wired: Ensure the USB-C cable is firmly connected to both the mouse and the computer, and the mouse is switched to 'OFF' mode.
• Ponovno pokrenite računalo: Ponovno pokretanje sustava često može riješiti probleme s povezivanjem.

5.2 DPI se ne mijenja

• Ensure you are pressing the correct DPI button on the underside of the mouse.
• If using custom DPI settings, verify they are correctly configured in the driver software.

5.3 Gumbi ne rade ispravno

• Check if button assignments have been altered in the driver software. Reset to default if necessary.
• Ensure the mouse is clean and there is no physical obstruction preventing button presses.

5.4 Signal Loss on Windows 11

Some users have reported signal loss issues when switching to Windows 11. Ensure your mouse drivers are updated to the latest version available on the ATTACK SHARK website. Check for any conflicting software or power management settings in Windows 11 that might be affecting USB or Bluetooth devices.

6. Specifikacije proizvoda

7. Jamstvo i podrška

7.1 Informacije o jamstvu

Specific warranty details for the ATTACK SHARK X3PRO mouse are typically provided with your purchase documentation or can be found on the official ATTACK SHARK webMolimo sačuvajte dokaz o kupnji za potrebe jamstva.

7.2 Korisnička podrška

For technical assistance, troubleshooting beyond this manual, or inquiries regarding your product, please contact ATTACK SHARK customer support. Visit the official ATTACK SHARK Store ili njihov službenik webstranica za kontaktne informacije i resurse podrške.