Phanteks XT Pro Mid-Tower Gaming Chassis User Manual

1. Uvod

Thank you for choosing the Phanteks XT Pro Mid-Tower Gaming Chassis. This manual provides detailed instructions for the assembly, installation, and maintenance of your new PC case. The XT Pro is designed for high airflow performance, featuring a mesh front panel and tempered glass side panel, offering excellent cooling capabilities and a clear view of your internal components. It supports a wide range of hardware, including large graphics cards and extensive cooling solutions.

Figure 1.1: Phanteks XT Pro Mid-Tower Gaming Chassis, showcasing its sleek black design and tempered glass side panel.

2. Sigurnosne informacije

• Always disconnect the power supply from the wall outlet before performing any installation, cleaning, or maintenance.
• Handle tempered glass panels with care. They are fragile and can shatter if dropped or subjected to impact.
• Avoid exposing the chassis to extreme temperatures, humidity, or direct sunlight.
• Keep small components and screws out of reach of children.
• Ensure proper grounding to prevent electrostatic discharge (ESD) damage to sensitive electronic components.
• Do not attempt to modify the chassis structure or components, as this may void your warranty and pose safety risks.

3. Sadržaj paketa

Please verify that all items listed below are present in your package. If any items are missing or damaged, please contact Phanteks customer support.

• Phanteks XT Pro Mid-Tower Chassis
• Accessory Box (screws, zip ties, standoffs, etc.)
• Korisnički priručnik (ovaj dokument)
• (Optional, depending on model) 1x 120mm Fan

4. Postavljanje i instalacija

4.1 Priprema šasije

Before installing components, remove the side panels. The tempered glass side panel is typically secured with thumbscrews at the rear. The solid steel side panel may also use thumbscrews or a latch mechanism.

Slika 4.1: View of the Phanteks XT Pro chassis with the tempered glass side panel installed.

Figure 4.2: Rear interior view of the chassis, showing cable management routes and drive mounting locations.

4.2 Instalacija matične ploče

Install the necessary motherboard standoffs into the chassis tray according to your motherboard's form factor (ATX, Micro-ATX, Mini-ITX). Carefully place the motherboard onto the standoffs, aligning the screw holes, and secure it with the provided motherboard screws.

Slika 4.3: Unutrašnjost view of the Phanteks XT Pro with a motherboard, CPU cooler, and graphics card installed.

4.3 Instalacija jedinice za napajanje (PSU)

The PSU mounts at the bottom rear of the chassis. Slide your PSU into the designated bay from the rear and secure it with screws. Ensure the PSU fan faces downwards (if the case has a bottom vent) or upwards, depending on your cooling preference.

4.4 Instalacija pogona za pohranu

The XT Pro supports multiple storage drives.

• 3.5" tvrdi diskovi: Install into the drive cage located under the PSU shroud.
• 2.5" SSD-ovi: Mount to the dedicated SSD brackets behind the motherboard tray.

Figure 4.4: Diagram illustrating the locations for 3.5" HDDs and 2.5" SSDs within the chassis.

4.5 Instalacija grafičke kartice (GPU)

Remove the necessary PCIe slot covers at the rear of the chassis. Insert your graphics card into the PCIe slot on the motherboard and secure it with the thumbscrew or latch mechanism. The XT Pro supports large graphics cards without compromise.

4.6 Ugradnja ventilatora i radijatora

The XT Pro offers extensive cooling support:

• Ispred: Up to 3x 120mm or 2x 140mm fans.
• Vrh: Up to 3x 120mm or 2x 140mm fans, supporting up to a 360mm radiator.
• straga: 1x 120 mm ventilator.
• Dno: Do 2x 120 mm ventilatora.

Install fans and radiators using the appropriate screws. Ensure correct airflow direction for optimal cooling.

Figure 4.5: Diagram showing fan and radiator mounting locations and supported sizes (120mm, 140mm, and radiator sizes).

4.7 Upravljanje kabelima

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics. Secure cables with zip ties or Velcro straps.

5. Upravljanje šasijom

5.1 Prednja I/O ploča

The front I/O panel is located on the top of the chassis and provides convenient access to essential ports and controls.

• Gumb za napajanje: Uključuje/isključuje sustav.
• Gumb za resetiranje: Ponovno pokreće sustav.
• USB 3.0 priključci: Za prijenos podataka velikom brzinom.
• USB-C 3.0 priključak: For modern USB-C devices.
• Audio priključci: Priključci za slušalice i mikrofon.

Slika 5.1: Krupni plan view of the top I/O panel, indicating the Power Button, Reset Button, USB 3.0, USB-C 3.0, and Audio/Microphone jacks.

6. Održavanje

Redovito održavanje pomaže u osiguravanju optimalnih performansi i dugovječnosti komponenti vašeg računala.

• Filteri za prašinu: The XT Pro features an ultra-fine performance mesh front panel and a top dust filter. Regularly clean these filters to maintain optimal airflow. They can typically be removed and cleaned with compressed air or a soft brush.
• Vanjsko čišćenje: Obrišite vanjske površine mekom, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili otapala.
• Čišćenje interijera: Periodically use compressed air to remove dust buildup from internal components like fans, heatsinks, and circuit boards. Ensure the system is powered off and unplugged before cleaning.

7. Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti.

• Sustav se ne uključuje:
  • Check all power connections: PSU to wall, PSU to motherboard, and front panel power switch cable to motherboard.
  • Ensure the PSU switch is in the "ON" position.
• Nema izlaza za prikaz:
  • Verify that the monitor cable is securely connected to the graphics card (or motherboard, if using integrated graphics).
  • Ponovno postavite grafičku karticu i RAM module.
• Pretjerana buka:
  • Check if any fan cables are obstructing fan blades.
  • Ensure all fans are securely mounted.
  • Clean dust from fans and filters.
• Poor airflow/high temperatures:
  • Očistite sve filtere za prašinu i unutarnje komponente.
  • Verify correct fan orientation (intake/exhaust).
  • Ensure no cables are blocking airflow paths.

For further assistance, please refer to the Phanteks support webstranicu ili se obratite njihovoj službi za korisnike.

8. Specifikacije

Slika 8.1: Dimenzionalno prekoview of the Phanteks XT Pro chassis.

9. Jamstvo i podrška

Phanteks products come with a limited warranty. Please refer to the official Phanteks webstranicu za najnovije informacije o jamstvu i uvjete specifične za vašu regiju.

For technical support, product registration, or to download the latest drivers and manuals, please visit the official Phanteks support page:www.phanteks.com/support.html

When contacting support, please have your product model number (PH-XT523P1_BK01) and purchase information ready.