GZYF LIRU MLS062 Universal Motorcycle LCD LED Digital Odometer Speedometer Gauge Instruction Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your GZYF LIRU MLS062 Universal Motorcycle LCD LED Digital Odometer Speedometer Gauge. Please read this manual thoroughly before installation and use to ensure proper function and safety.

1.1 Sigurnosne informacije

• Uvijek odspojite akumulator motocikla prije izvođenja bilo kakvih električnih radova.
• Provjerite jesu li svi spojevi ožičenja sigurni i pravilno izolirani kako biste spriječili kratki spoj.
• Brzinomjer sigurno montirajte kako biste izbjegli oštećenja od vibracija ili odvajanje tijekom rada.
• Ako niste sigurni u vezi s bilo kojim koracima instalacije, obratite se kvalificiranom tehničaru.

2. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

• 1 x GZYF LIRU MLS062 Digital Odometer Speedometer Gauge
• 1 x Speed Sensor
• Mounting Hardware (as pictured)

Image 2.1: The GZYF LIRU MLS062 Digital Odometer Speedometer Gauge, including the speed sensor and small mounting components.

3. Proizvod je gotovview

The MLS062 is a universal digital gauge designed for motorcycles, providing essential riding information on a clear LCD LED display.

Slika 3.1: Prednja strana view of the speedometer unit, showing the display area and control buttons.

Slika 3.2: Bočna strana view of the speedometer unit, highlighting its compact design.

3.1 Ključne značajke

• LCD LED Digital Display
• Speedometer (Max 199 units)
• Odometer (Max 99999.9)
• Trip Meter (Max 999.9, resettable)
• RPM Gauge (Max 14000r/min)
• Gear Indicator (N, 1-6)
• 24-satni sat
• Turn Signal, High Beam, and Neutral Indicators

4. Specifikacije

Image 4.1: Dimensional diagram of the speedometer unit, showing measurements in millimeters.

5. Postavljanje i instalacija

The MLS062 speedometer is designed for universal fitment on 12V motorcycles. Professional installation is recommended.

5.1 Montiranje brzinomjera

1. Choose a suitable location on your motorcycle's dashboard or handlebar area for optimal visibility.
2. Use the provided mounting hardware to securely attach the speedometer unit. Ensure it is stable and does not obstruct your view ili kontrole.

5.2 Spajanje ožičenja

Refer to the wiring diagram (if provided with your unit) and the image below for typical connections. The speedometer uses standard multi-pin connectors.

Image 5.1: Close-up of the wiring harness connectors, showing multiple pins for various functions.

• Power (12V): Connect the positive wire to a switched 12V power source (e.g., ignition). Connect the negative/ground wire to the motorcycle chassis.
• Senzor brzine: Connect the speed sensor wires to the corresponding input on the speedometer harness.
• RPM Signal: Connect the RPM signal wire to the motorcycle's ignition coil or ECU RPM output.
• Gear Position: Connect the gear position wires (N, 1-6) to the motorcycle's gear sensor outputs.
• Indikatori: Connect wires for turn signals (left/right), high beam, and neutral light to their respective motorcycle circuits.

5.3 Ugradnja senzora brzine

1. Mount the speed sensor near a rotating part of the wheel (e.g., brake disc bolts, wheel spokes) that can trigger the sensor.
2. Ensure the sensor is positioned correctly to detect rotations consistently. Adjust the gap between the sensor and the trigger point as needed.

6. Upute za rad

Once installed and powered on, the speedometer will display various information. The unit typically features two buttons for control, often labeled 'SEL' (Select) and 'ADJ' (Adjust).

Image 6.1: The MLS062 speedometer display shown in an operational state on a motorcycle dashboard, indicating speed, RPM, and gear.

6.1 Načini prikaza

• Press the 'SEL' button briefly to cycle through different display modes: Odometer (ODO), Trip Meter (TRIP), and Clock.
• The main display will always show current speed and RPM.

6.2 Resetting Trip Meter

• While in TRIP mode, press and hold the 'ADJ' button for a few seconds to reset the trip meter to zero.

6.3 Postavljanje sata

1. Navigate to the Clock display mode using the 'SEL' button.
2. Press and hold the 'SEL' button until the hour digits begin to flash.
3. Use the 'ADJ' button to adjust the hour.
4. Press 'SEL' again to move to the minute digits, then use 'ADJ' to adjust minutes.
5. Press 'SEL' one more time to save the settings and exit clock adjustment mode.

6.4 Unit Switching (MPH/KMH)

The method for switching between Miles Per Hour (MPH) and Kilometers Per Hour (KMH) may vary. Typically, this is done by:

• Turning off the ignition.
• Pressing and holding the 'SEL' button while turning the ignition back on.
• Release the button once the unit changes.

Note: Refer to specific instructions provided with your unit if this method does not work.

7. Održavanje

The GZYF LIRU MLS062 speedometer requires minimal maintenance.

• Čišćenje: Koristite meku, damp krpu za čišćenje zaslona i casing. Avoid abrasive cleaners or solvents that could damage the plastic.
• Veze: Periodically check all wiring connections for tightness and corrosion. Ensure the speed sensor is clean and free from debris.
• Zaštita okoliša: While designed for motorcycle use, prolonged exposure to extreme weather conditions (heavy rain, direct sunlight) may affect longevity. Consider a protective cover when parking for extended periods.

8. Rješavanje problema

9. Jamstvo i podrška

For warranty information or technical support, please refer to the seller or manufacturer's contact details provided at the point of purchase. Keep your purchase receipt as proof of purchase.