BN-LINK Countdown Timer Switch (Model CP-U211C) User Manual

Uvod

Thank you for choosing the BN-LINK Countdown Timer Switch (Model CP-U211C). This device is designed to provide convenient, energy-saving control for your exhaust fans, bathroom fans, and various lighting types. By automating shut-off operations, it helps reduce energy consumption and improve convenience in your home or office.

Please read this manual thoroughly before installation and operation to ensure proper use and safety.

Važne sigurnosne informacije

UPOZORENJE: RIZIK OD STRUJNOG UDARA.

• Installation must be performed by a qualified electrician or a person with a thorough understanding of electrical wiring and systems.
• Uvijek isključite napajanje na prekidaču ili kutiji s osiguračima prije ugradnje ili servisiranja prekidača.
• This device requires a neutral wire for operation. If your existing switch box does not have a neutral wire, consult a qualified electrician.
• For single-pole applications only. Do not use with 3-way or multi-way switches.
• Provjerite jesu li svi spojevi žica sigurni i pravilno izolirani.
• Ne prekoračujte maksimalne električne nazivne vrijednosti uređaja.
• Operativni svtage: 125V, 60 Hz.
• Current Rating: 15A/1875W Resistive or General Purpose, 10A/1250W Ballast or Tungsten, ½ HP, TV-5.

Postavljanje i instalacija

This section provides instructions for installing your BN-LINK Countdown Timer Switch. Ensure power is OFF before proceeding.

Sadržaj paketa:

• BN-LINK Prekidač s odbrojavanjem vremena
• Zidna ploča
• Montažni vijci
• Žičane matice

Potrebni alati (nisu uključeni):

• Odvijač (križni i plosnati)
• Skidači žice
• Električna traka
• Voltage Tester

Koraci instalacije:

1. Isključite napajanje: Pronađite prekidač koji upravlja prekidačem koji zamjenjujete i isključite ga. Provjerite je li napajanje isključeno pomoću regulatora glasnoće.tage tester.
2. Uklonite stari prekidač: Carefully remove the existing wall plate and unscrew the old switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal.
3. Identificirajte žice: Identify the following wires in your wall box:
   • Vruća žica (linija): Obično crna, dovodi napajanje iz prekidača.
   • Žica za opterećenje: Typically black, sends power to the light/fan.
   • Neutralna žica: Typically white. A neutral wire is REQUIRED for this switch.
   • Podna žica: Obično zeleni ili goli bakar.
4. Wire the New Switch: Connect the wires from your wall box to the BN-LINK timer switch using the provided wire nuts. Refer to the wiring diagram below.
   • Spojite Crna žica from the timer switch to the Hot Wire (Line) iz zidne kutije.
   • Spojite Crvena žica from the timer switch to the Učitaj žicu iz zidne kutije.
   • Spojite Bijela žica from the timer switch to the Neutralna žica iz zidne kutije.
   • Spojite Zelena žica from the timer switch to the Podna žica iz zidne kutije.
5. Osigurajte prekidač: Carefully fold the wires and push the timer switch into the wall box. Secure it with the mounting screws.
6. Postavite zidnu ploču: Attach the provided wall plate over the switch.
7. Vrati snagu: Ponovno uključite napajanje na prekidaču.
8. Testna operacija: Test the timer switch to ensure it functions correctly.

Slika: Wiring diagram for the BN-LINK Countdown Timer Switch. This diagram illustrates the connection points for the ground wire (green), load wire (red), hot wire (black), and neutral wire (white) to the timer switch. A clear warning states "Neutral Wire Must Required."

Upute za rad

The BN-LINK Countdown Timer Switch features intuitive touch controls for easy operation.

Slika: Ispred view of the BN-LINK Countdown Timer Switch, highlighting the "Touch ON/OFF Button" at the top and the six "Touch to select time" buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour). LED indicators are also shown, indicating which countdown is active.

Funkcije gumba:

• Gumb za napajanje (gore): This is the main ON/OFF button.
  • Press once to turn the connected device (light/fan) ON indefinitely.
  • Press again to turn the connected device OFF.
  • This button can also override any active countdown timer, turning the device OFF immediately.
• Countdown Timer Buttons (1 Min, 5 Min, 10 Min, 20 Min, 30 Min, 1 Hour): These buttons activate a preset countdown.
  • Press any of these buttons to turn the connected device ON for the selected duration.
  • The device will automatically turn OFF once the countdown expires.
  • An LED indicator next to the selected time will illuminate to show the active countdown.

Example Upotreba:

To turn on your bathroom fan for 10 minutes, simply press the "10 Min" button. The fan will run for 10 minutes and then automatically shut off. If you need to turn it off sooner, press the top Power button.

Svestrane primjene

The BN-LINK Countdown Timer Switch is suitable for a wide range of applications, enhancing convenience and energy efficiency in various areas of your home or business.

Slika: A collage of four images demonstrating common applications for the timer switch: a bathroom, a closet, a laundry room, and a garage. This illustrates the versatility of the product in different environments.

• Kupaonice: Control exhaust fans to reduce humidity and prevent mold growth.
• Closets & Pantries: Automatically turn off lights after a set time, preventing wasted energy.
• Garaže: Manage lighting or ventilation systems.
• Praonice rublja: Control exhaust fans or lighting.
• Spas & Enclosed Patios: Conveniently manage lighting or small ventilation units.

This timer switch is compatible with incandescent, fluorescent, and LED lighting, as well as bathroom exhaust fans and heaters within its specified electrical ratings.

Održavanje

BN-LINK prekidač s odbrojavanjem zahtijeva minimalno održavanje.

• Čišćenje: To clean the surface of the switch, gently wipe with a soft, damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or internal components.
• Inspekcija: Periodically inspect the switch and wall plate for any signs of damage or loose connections. If any issues are found, turn off power at the circuit breaker and consult a qualified electrician.
• Nema dijelova koje može servisirati korisnik: There are no user-serviceable parts inside the switch. Do not attempt to open or repair the unit yourself.

Rješavanje problema

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact BN-LINK Customer Support.

Tehnički podaci

Slika: Detailed dimensions of the BN-LINK Countdown Timer Switch and its accompanying wall plate. The image shows the height (5 inches for plate, 2.76 inches for switch body), width (3.3 inches for plate, 1.57 inches for switch body), and depth (1.73 inches for switch body).

Jamstvo i podrška

BN-LINK products are designed to meet high-quality standards. For warranty information or technical support, please contact BN-LINK customer service.

Please have your model number (CP-U211C) and purchase date available when contacting support.

Podaci za kontakt:

• Refer to the BN-LINK official webnajnovije kontaktne podatke potražite na web-mjestu ili pakiranju proizvoda.
• Online support may be available through the BN-LINK brand store on Amazon or their official webmjesto.