JENABOM 47-in-1 Electric Screwdriver Cordless Drill Rechargeable Set User Manual

Uvod

Thank you for choosing the JENABOM 47-in-1 Electric Screwdriver Cordless Drill Rechargeable Set. This manual provides essential information for the safe operation, setup, maintenance, and troubleshooting of your new tool. Please read it thoroughly before use and retain it for future reference.

Važne sigurnosne upute

• Always wear appropriate personal protective equipment, such as safety glasses, when operating the tool.
• Održavajte radni prostor čistim i dobro osvijetljenim. Neuredna ili tamna područja izazivaju nezgode.
• Nemojte raditi s električnim alatima u eksplozivnim atmosferama, poput prisutnosti zapaljivih tekućina, plinova ili prašine.
• Držite djecu i promatrače podalje dok radite s električnim alatom. Smetnje mogu uzrokovati gubitak kontrole.
• Izbjegavajte slučajno pokretanje. Prije spajanja baterije, podizanja ili nošenja alata provjerite je li prekidač u isključenom položaju.
• Nemojte pretjerivati. Održavajte pravilan oslonac i ravnotežu cijelo vrijeme.
• Odvojite bateriju od električnog alata prije bilo kakvih podešavanja, promjene pribora ili spremanja električnih alata.
• Električni alat, pribor i nastavke za alat koristite u skladu s ovim uputama, uzimajući u obzir radne uvjete i rad koji treba izvesti.
• Čuvajte neiskorištene električne alate izvan dohvata djece i ne dopustite osobama koje nisu upoznate s električnim alatom ili ovim uputama da rade s električnim alatom.

Sadržaj paketa

Provjerite jesu li sve dolje navedene stavke prisutne u vašem paketu:

• 1x JENABOM Electric Screwdriver
• 28x CR-V Screwdriver Bits
• 8x Socket Wrenches (5-12mm)
• 4x Long Screwdriver Bits
• 2x Twist Drill Bits
• 1x Curved Extended Shaft (Flexible Extension Shaft)
• 1x Socket Link
• 1x Extended Screwdriver Bit Adapter Rod
• 1x USB punjač kabel
• 1x torbica za pohranu

Image: All components included in the JENABOM 47-in-1 Electric Screwdriver kit.

Proizvod gotovview

Familiarize yourself with the main components of your electric screwdriver:

• Self-Lock Joint: Stabilizes the drill bit firmly.
• Rotary Opening: Allows for multi-angle operation.
• Two-Way Drill Switch: For convenient installation and removal of fasteners.
• NO/ISKLJUČENI prekidač: Aktivira i deaktivira alat.
• Neklizajuća ručka: Pruža siguran hvat tijekom rada.
• LED radno svjetlo: Osvjetljava radno područje.

Image: Key features and components of the electric screwdriver.

Postavljanje

1. Punjenje baterije

The electric screwdriver is powered by a 3.6V rechargeable lithium-ion battery. Before first use, or if the battery is low, charge the device using the provided USB charging cable.

• Connect the USB charging cable to the screwdriver's charging port.
• Drugi kraj USB kabela spojite na kompatibilni USB adapter za napajanje (nije uključen) ili USB priključak računala.
• During the first 1-3 charges, allow approximately 2 hours for a full charge.
• The red indicator light will turn off once charging is complete.

2. Attaching Screwdriver Bits or Drill Bits

To attach a bit:

1. Provjerite je li odvijač isključen.
2. Insert the desired screwdriver bit or drill bit into the self-lock joint at the front of the tool until it clicks securely into place.
3. To remove, pull the bit firmly while holding the self-lock joint.

3. Adjusting the Handle Angle

The screwdriver features a rotary opening that allows the handle to be adjusted for straight or pistol grip configurations, suitable for various working angles and tight spaces.

1. Locate the "PUSH" button on the top of the screwdriver.
2. Press and hold the "PUSH" button.
3. Rotate the handle to your desired position (straight or angled).
4. Release the "PUSH" button to lock the handle in place.

Image: Adjusting the screwdriver handle for different grip styles.

Upute za rad

1. Uključivanje/isključivanje i upravljanje smjerom

The screwdriver features a two-way drill switch for forward and reverse rotation.

• To turn the screwdriver on, press the NO/OFF switch.
• To select forward rotation (for tightening screws), press the left side of the two-way switch.
• To select reverse rotation (for loosening screws), press the right side of the two-way switch.
• Release the NO/OFF switch to stop the tool.

Image: Counter-Clockwise Rotation (Loosening)

Image: Clockwise Rotation (Tightening)

Images: Demonstrating the forward and reverse rotation controls.

2. Korištenje LED radnog svjetla

The integrated LED light automatically illuminates when the screwdriver is in operation, providing visibility in dimly lit areas.

Image: LED work light in action.

3. Utilizing the Flexible Extension Shaft

For reaching screws in narrow or awkward spaces, attach the flexible extension shaft. This accessory allows you to bend, twist, and straighten the bit to access difficult angles.

Slika: pramples of using the flexible extension shaft for hard-to-reach areas.

Održavanje

• Čišćenje: Redovito brišite alat mekom krpomamp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the tool is dry before storage.
• Skladištenje: Store the electric screwdriver and its accessories in the provided storage case in a dry, cool place, away from direct sunlight and moisture. Keep out of reach of children.
• Njega baterije: For optimal battery life, avoid completely draining the battery before recharging. If storing for extended periods, charge the battery to approximately 50% every 3-6 months.

Rješavanje problema

Tehnički podaci

Jamstvo i podrška

For warranty information or technical support, please refer to the purchase documentation or contact JENABOM customer service through the retailer where the product was purchased. You can also visit the official JENABOM store on Amazon for more information: JENABOM Store.