1. Uvod
Thank you for choosing the Bestway Hydro-Force Auto Electric Air Pump 12V. This electric pump is designed for efficient and convenient inflation of inflatable paddle boards, stand-up paddleboards (SUPs), and kayaks. It features a 12V power connection, adjustable pressure settings, an easy-to-read LCD display, and an automatic shut-off function to prevent over-inflation. Please read this manual thoroughly before use to ensure proper operation and safety.
2. Sigurnosne informacije
- Always connect the pump to a 12V DC power source (car or boat accessory outlet). Do not attempt to connect to other power sources.
- Do not operate the pump in wet conditions or immerse it in water.
- Držite djecu i kućne ljubimce podalje od pumpe tijekom rada.
- Ensure the hose is securely attached to both the pump and the inflatable valve before starting inflation.
- Do not exceed the recommended pressure for your inflatable product. Refer to your inflatable's manual for specific pressure requirements.
- Ostavite pumpu da se ohladi nakon dulje uporabe kako biste spriječili pregrijavanje.
- Disconnect the pump from the power source when not in use or during maintenance.
- Ne blokirajte dovod ili odvod zraka tijekom rada.
3. Sadržaj paketa
Provjerite jesu li sve komponente prisutne u vašem paketu:
- 1 x Hydro-Force Auto Electric Air Pump
- 1 x savitljivo crijevo
- 1 x Washer (for hose connection)
4. Postavljanje
Spojite fleksibilno crijevo: Attach one end of the flexible hose to the pump's inflation port by twisting it clockwise until secure. Ensure the washer is properly seated to prevent air leaks.
Image: Flexible hose with yellow connectors, coiled, ready for attachment to pump and inflatable.
Connect to Inflatable: Attach the other end of the flexible hose to the valve of your inflatable paddle board, SUP, or kayak. Use the appropriate adapter if necessary. Twist to secure the connection.
Image: Connecting the pump hose to an inflatable paddle board.
Spojite na napajanje: Insert the 12V DC power connector into your vehicle's or boat's 12V accessory outlet (cigarette lighter socket).
Image: Connecting the pump to a 12V car power outlet.
5. Upute za rad
Uključivanje: Once connected to power, press the power button (ⓘ) on the pump's control panel to turn it on. The LCD display will illuminate.
Image: Pump control panel with LCD display and buttons.
Odaberite jedinicu: Pritisnite tipku PSI/BAR button to toggle between Pounds per Square Inch (PSI) and Bar pressure units, depending on your preference or inflatable's specification.
Postavite željeni tlak: Koristite + i - buttons to adjust the target inflation pressure. The pressure can be set in increments of 0.5 PSI. Refer to your inflatable's manual for the correct pressure.
Početak inflacije: Nakon što je postavljen željeni tlak, pritisnite gumb za napajanje (ⓘ) again to start the inflation process. The pump will begin to inflate your product, and the current pressure will be displayed on the LCD screen.
Automatsko isključivanje: The pump will automatically stop once the preset pressure is reached, preventing over-inflation and ensuring the safety of your inflatable.
Prekini vezu: After inflation is complete and the pump has shut off, disconnect the hose from the inflatable valve and then unplug the 12V power connector from the outlet.
6. Održavanje
- Čišćenje: Wipe the pump's exterior with a soft, damp krpom. Ne koristite jake kemikalije ili abrazivna sredstva za čišćenje. Prije skladištenja provjerite je li pumpa potpuno suha.
- Skladištenje: Store the pump and its accessories in a dry, cool place, away from direct sunlight and extreme temperatures. Keep the hose coiled neatly to prevent kinks or damage.
- Inspekcija: Periodically inspect the power cord, hose, and connectors for any signs of wear or damage. Do not use the pump if any components are damaged.
7. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Pumpa se ne uključuje. | No power from 12V outlet; loose connection; blown fuse in vehicle. | Check 12V outlet for power; ensure power plug is fully inserted; check vehicle's fuse box. |
| Pump runs but inflatable does not inflate or inflates slowly. | Hose not securely attached; air leak at connections; inflatable valve not fully open. | Ensure hose is tightly connected to pump and inflatable; check for leaks; ensure inflatable valve is in the open position. |
| Pumpa se pregrijava i isključuje. | Produžena kontinuirana upotreba. | Allow the pump to cool down for at least 30 minutes before resuming operation. |
| Pump does not reach desired pressure. | Air leak; maximum pressure limit reached. | Check all connections for leaks. Ensure the desired pressure is within the pump's maximum capacity (16 PSI). |
8. Specifikacije
- Broj modela: 65315
- Marka: Bestway
- Izvor napajanja: 12V DC (Corded Electric)
- Maksimalni tlak: 16 PSI (1.10 BAR)
- Način rada: Automatski
- Dimenzije proizvoda (D x Š x V): 23.5 cm x 14 cm x 13 cm
- Težina artikla: 1.19 kilogram
- Duljina crijeva: 2.75 metara
- Materijal: Plastični
- Uključene komponente: 1 electric pump, 1 flexible hose, 1 washer
9. Jamstvo i podrška
Za informacije o jamstvu ili tehničku podršku, molimo pogledajte dokumentaciju koja je priložena uz kupnju ili posjetite službenu web stranicu Bestwaya. webstranicu. Sačuvajte dokaz o kupnji za slučaj reklamacije.
Bestway službenik Webstranica: www.bestwaycorp.com