CREWORKS 22kg/24h Ice Maker Instruction Manual

Uvod

Thank you for choosing the CREWORKS 22kg/24h Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

Image: The CREWORKS 22kg/24h Ice Maker, a sleek stainless steel unit with a clear lid, producing ice cubes on a kitchen countertop.

Sigurnosne upute

Za siguran rad uvijek slijedite ove osnovne mjere opreza:

• Pročitajte sve upute prije uporabe uređaja.
• Nemojte koristiti uređaj s oštećenim kabelom ili utikačem, ili nakon što uređaj ne radi ispravno ili je na bilo koji način oštećen.
• Ne uranjajte kabel za napajanje, utikač ili bilo koji dio uređaja u vodu ili druge tekućine.
• Držite uređaj dalje od izvora topline i izravne sunčeve svjetlosti.
• Uvjerite se da je uređaj postavljen na stabilnu, ravnu površinu.
• Ovaj uređaj je samo za upotrebu u kućanstvu.
• Isključite uređaj iz struje prije čišćenja ili bilo kakvog održavanja.

Komponente proizvoda

The CREWORKS Ice Maker comes with the following components:

• Jedinica za led
• Košara za led
• Ledena čašica
• korisnički priručnik

Image: The CREWORKS Ice Maker shown with its included ice scoop and removable ice basket, ready for use.

Postavljanje

1. Raspakiranje: Pažljivo izvadite ledomat iz ambalaže. Uklonite sav materijal za pakiranje, uključujući traku ili zaštitnu foliju.
2. Plasman: Place the ice maker on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides). Avoid placing it near heat sources or in direct sunlight.
3. Početno čišćenje: Prije prve upotrebe očistite unutrašnjost aparata za led. Detaljne upute potražite u odjeljku "Održavanje i čišćenje".
4. Priključak za napajanje: Osigurajte voltagNavedeno na uređaju odgovara vašoj lokalnoj električnoj mreži. Uključite kabel za napajanje u uzemljenu električnu utičnicu.
5. Opskrba vodom:
   • Ručno popunjavanje: Open the top lid and fill the water reservoir with potable water up to the "MAX" fill line. Do not overfill.
   • Automatic Water Supply (if applicable): For models with direct water connection, connect the water inlet hose to a cold water tap and the ice maker. Ensure all connections are secure to prevent leaks.

Image: Diagram illustrating two water supply methods: manual filling of the reservoir and direct connection to a cold water tap with a filter.

Upute za rad

Upravljačka ploča gotovaview

Slika: Detaljna view of the ice maker's LCD control panel, showing buttons for power, timer/clean, and ice thickness adjustment, along with status indicators.

Intuitivna LCD upravljačka ploča omogućuje jednostavno rukovanje:

• Tipka ON/OFF: Uključuje ili isključuje jedinicu.
• Tipka TAJMER/ČIŠĆENJE: Initiates the self-cleaning cycle or sets a timer for operation.
• Gumbi +/-: Adjust ice making time to customize ice cube thickness.
• Indikatori: Display status such as "Ice Making in Progress," "Self-Cleaning in Progress," "Ice Basket Full," and "Low Water Level."

Pravljenje leda

1. Uključivanje: Pritisnite tipku UKLJUČENO/ISKLJUČENO button to start the ice maker.
2. Select Ice Size (Optional): Koristite +/- buttons to adjust the ice making cycle time. A longer cycle results in thicker ice cubes.
3. Proizvodnja leda: The unit will automatically begin the ice making process. The "Ice Making in Progress" indicator will illuminate. The first batch of ice cubes will be ready in approximately 11-20 minutes.
4. Skupljanje leda: Once ice is produced, it will drop into the ice basket. When the ice basket is full, the "Ice Basket Full" indicator will light up, and the machine will pause production. Remove ice to resume.
5. Niska voda: If the water level is too low, the "Low Water Level" indicator will light up, and the machine will stop. Refill the water reservoir to continue.

Image: A visual guide showing three steps: 1. Opening the top reservoir and filling with water. 2. Pressing the ON/OFF button to start ice production. 3. Opening the lid and removing the ice basket filled with ice.

Održavanje i čišćenje

Redovito čišćenje i održavanje osiguravaju optimalne performanse i higijenu.

Funkcija samočišćenja

1. Provjerite je li spremnik za vodu napunjen čistom vodom.
2. Pritisnite i držite TIMER/CLEAN button for a few seconds to activate the self-cleaning mode. The "Self-Cleaning in Progress" indicator will light up.
3. The cleaning cycle will run automatically. Once complete, drain the water from the unit.

Image: The ice maker illustrating its self-cleaning mode, with an emphasis on the drain plug located at the bottom for easy water removal.

Ručno čišćenje

1. Odspojite: Uvijek isključite ledomat iz utičnice prije čišćenja.
2. Odvod vode: Remove the drain plug at the bottom of the unit to empty any remaining water from the reservoir.
3. Čista unutrašnjost: Koristite mekanu krpu dampened with a mild detergent solution to wipe the interior surfaces, including the ice basket and water reservoir. Rinse thoroughly with clean water.
4. Čista vanjština: Obrišite vanjštinu mekom, damp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala.
5. Suho: Prije ponovnog sastavljanja i skladištenja ili korištenja uređaja provjerite jesu li svi dijelovi potpuno suhi.

Rješavanje problema

Tehnički podaci

Image: A diagram showing the precise dimensions of the CREWORKS Ice Maker and its ice basket.

Jamstvo i podrška

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official CREWORKS website. Please have your model number (22CIM) and purchase date available when contacting support.

Napomena: Informacije o dostupnosti rezervnih dijelova nisu navedene u detaljima o proizvodu.