Aigo Q1718 Mini-Tower PC Case Instruction Manual

1. Uvod

This manual provides essential instructions for the installation, operation, and maintenance of your Aigo Q1718 Mini-Tower PC Case. Designed for M-ATX and ITX motherboards, this compact case offers a robust housing for your computer components. Please read this manual thoroughly before beginning any installation to ensure proper assembly and functionality.

Slika 1: Prednja strana view of the Aigo Q1718 Mini-Tower PC Case.

Slika 2: Kutno view of the Aigo Q1718 Mini-Tower PC Case.

2. Postavljanje i instalacija komponenti

Follow these steps to install your computer components into the Aigo Q1718 PC Case. Ensure the case is placed on a stable, flat surface before beginning.

2.1 Otvaranje kućišta

Carefully remove the side panel(s) of the case to access the interior. Typically, this involves unscrewing thumbscrews at the rear and sliding the panel backward.

2.2 Instalacija matične ploče

The Aigo Q1718 supports M-ATX and ITX motherboards. Install the necessary standoffs onto the motherboard tray according to your motherboard's form factor. Carefully place your motherboard onto the standoffs and secure it with screws.

2.3 Instalacija napajanja

The case supports ATX power supplies. Install your ATX power supply into its designated bay, usually at the top or bottom rear of the case, and secure it with screws.

2.4 Instalacija uređaja za pohranu

The case provides bays for 2 x SSDs and 1 x HDD. Mount your SSDs and HDDs into the appropriate drive bays and secure them. Connect the necessary power and data cables.

2.5 Instalacija kartice za proširenje

The case features 4 expansion slots. Install your graphics card (VGA) or other PCIe expansion cards into the motherboard's PCIe slots. Note the maximum VGA length supported is 155 mm.

2.6 Ugradnja hladnjaka procesora

Install your CPU cooler onto the motherboard. Ensure it fits within the maximum supported CPU cooler height of 270 mm.

2.7 Fan Installation (Optional)

The Aigo Q1718 case does ne include fans. You can install additional cooling fans in the following positions:

• Front: 1 x 120 mm fan
• Side: 1 x 120 mm fan
• Rear: 1 x 80 mm fan

Slika 3: Unutrašnjost view of the case, left side.

Slika 4: Unutrašnjost view of the case, right side.

3. Upravljanje kućištem računala

Once all components are installed and cables are connected, you can close the case and power on your system.

3.1 Priključci prednje ploče

The front panel of the Aigo Q1718 provides convenient access to:

• 2 x USB 2.0 Ports: Za spajanje perifernih uređaja poput tipkovnica, miševa ili USB pogona.
• Audio/Mic Jacks: For connecting headphones, speakers, or microphones.
• Gumb za napajanje: Za uključivanje ili isključivanje računala.
• Reset Button (if present): Za ponovno pokretanje računala.

Ensure all front panel cables are correctly connected to your motherboard's headers during installation.

4. Održavanje

Redovito održavanje pomaže u osiguravanju optimalnih performansi i dugovječnosti komponenti vašeg računala.

4.1 Čišćenje

• Vanjski: Koristite meku, damp krpom za brisanje vanjskih površina. Izbjegavajte abrazivna sredstva za čišćenje.
• Interijer: Periodically open the case and use compressed air to remove dust buildup from components and fan mounts. If dust filters are present, clean them regularly.

4.2 Opća briga

Avoid placing the case in direct sunlight or near heat sources. Ensure adequate airflow around the case to prevent overheating.

5. Rješavanje problema

Ako naiđete na probleme, razmotrite sljedeće uobičajene korake za rješavanje problema:

• Sustav se ne uključuje: Check all power connections, including the power supply to the wall outlet, the power supply to the motherboard, and the front panel power switch cable to the motherboard.
• Components not detected: Ensure all components (motherboard, CPU, RAM, storage, graphics card) are properly seated and their respective power and data cables are securely connected.
• Pregrijavanje: Verify that all installed fans are spinning correctly and that there is no excessive dust buildup obstructing airflow. Ensure proper thermal paste application on the CPU cooler.

For more complex issues, consult the manuals for your individual components or seek professional assistance.

6. Specifikacije

7. Informacije o jamstvu

The Aigo Q1718 Mini-Tower PC Case comes with a 12-mjesečno jamstvo proizvođača od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalima i izradi pri normalnoj uporabi. Ne pokriva štetu uzrokovanu nepravilnom ugradnjom, zlouporabom, nesrećama, neovlaštenim popravcima ili preinakama.

Zadržite svoj dokaz o kupnji za jamstvene zahtjeve.

8. Podrška

For technical assistance, warranty claims, or further inquiries regarding your Aigo Q1718 PC Case, please contact Aigo customer support through their official webweb-mjesto ili prodavač od kojeg ste kupili proizvod.

When contacting support, please have your product model (Q1718-BK) and proof of purchase readily available.