1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Gebildet 19mm 15A/220VAC LED Blue Latching Push Button Switch. This all-metal switch is designed for various applications requiring a manual reset, boat reset, instrumentation, entry protection, or household appliance control. It features a solid, crisp push feedback and a comfortable blue LED light. Its IP65 waterproof rating allows for use in humid environments, and the metal shell tolerates vibrations and other harsh environmental conditions.
2. Sigurnosne informacije
- Always disconnect power before installation or maintenance to prevent electric shock.
- Ensure all wiring connections are secure and correctly insulated.
- Provjerite je li voltage and current ratings of the switch match your application requirements.
- Instalaciju treba izvršiti kvalificirana osoba ako niste sigurni u vezi električnih instalacija.
- Do not exceed the specified electrical ratings (15A, 220VAC).
3. Značajke proizvoda
- Materijal: Stainless steel shell for durability and corrosion resistance.
- Vrsta operacije: Latching (Push ON, Push OFF).
- LED indikator: Blue LED, 220VAC.
- Ocjena vodootpornosti: IP65, suitable for wet or dusty environments.
- Kompaktan dizajn: Short type with a total height of 2.5 cm, ideal for limited space installations.
- Struktura kontakta: SPST (Single Pole Single Throw), 1NO (Normally Open).
- Visoka ocjena snage: 15A/220VAC.
Figure 1: Compact design for limited space installation.
Figure 2: IP65 waterproof rating ensures protection against water and dust.
4. Postavljanje i instalacija
4.1 Sadržaj paketa
- 1 x Gebildet 19mm Latching Push Button Switch
- 1 x Wiring Diagram (often included with the switch)
4.2 Montaža
- Provjerite je li površina za montiranje čista i ravna.
- Drill a mounting hole with a diameter of 19mm (0.74 inches).
- Insert the switch into the drilled hole.
- Secure the switch with the provided nut. The recommended nut torque is 5-14 Nm.
- The switch is suitable for panel thickness between 1-9 mm.
Figure 3: Detailed dimensions and specifications for mounting.
4.3 Upute za ožičenje
The switch features 4 pins for connection. A simplified wiring diagram is provided to assist with installation. Ensure correct polarity for the LED if applicable, though the provided diagram typically shows AC connections.
- Vrsta ožičenja: Solder pin.
- terminali: Typically two for the switch contacts (NO) and two for the LED.
Figure 4: Wiring diagram showing two common connection methods.
Top Diagram: Device ON, Light ON; Device OFF, Light OFF. This configuration illuminates the LED only when the switch is activated and the device is powered.
Bottom Diagram: Light Always ON. This configuration keeps the LED illuminated constantly, regardless of the switch's ON/OFF state, as long as power is supplied to the LED circuit.
5. Upute za rad
This is a latching push button switch. Its operation is straightforward:
- Upaliti: Press the button once. The button will remain in the depressed position, and the connected device will activate. The blue LED will illuminate (if wired for simultaneous operation).
- Isključiti: Press the button again. The button will return to its original position, and the connected device will deactivate. The blue LED will turn off (if wired for simultaneous operation).
Figure 5: Visual representation of the switch in ON and OFF states.
6. Održavanje
The Gebildet push button switch is designed for durability and requires minimal maintenance.
- Čišćenje: Koristite meku, damp cloth to clean the exterior of the switch. Avoid abrasive cleaners or solvents.
- Inspekcija: Povremeno provjeravajte spojeve ožičenja na čvrstoću i znakove istrošenosti ili korozije.
- Vodootporna značajka: The IP65 rating protects against dust and low-pressure water jets. While suitable for humid environments, avoid prolonged submersion or high-pressure water exposure.
7. Rješavanje problema
- Switch Not Activating Device:
- Check all wiring connections according to the diagram (Figure 4).
- Ensure power supply to the switch and device is active.
- Verify the device itself is functioning correctly.
- LED ne svijetli:
- Confirm the LED wiring is correct as per the diagram (Figure 4).
- Check if the power supply to the LED circuit is present.
- Ensure the switch is in the ON position if the LED is wired for simultaneous operation.
- Switch Not Latching/Unlatching:
- Provjerite je li tipka čvrsto pritisnuta.
- Inspect for any physical obstruction or damage to the button mechanism.
8. Specifikacije
| Proizvođač | Obrazac |
| Broj modela | E1417 |
| Veličina montažne rupe | 19 mm (0.74 inča) |
| Ocijenjeno svtage | 220VAC |
| Nazivna struja | 15A |
| Nazivna snaga | 4400 vata |
| Vrsta operacije | Latching (Push ON, Push OFF) |
| LED boja | Plava |
| Kontaktni materijal | Srebrna legura |
| Materijal školjke | Nehrđajući čelik |
| Zaštitna klasa | IP65 |
| Električni život | ≥200,000 puta |
| Mehanički život | ≥1,000,000 puta |
| Temperatura okoline | -20°C ~ +50°C |
| Dimenzije (D x Š x V) | 12 x 9 x 2.3 cm |
| Težina | 10 grama |
9. Informacije o jamstvu
Gebildet products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the official Gebildet webstranicu ili se obratite mjestu kupnje. Sačuvajte račun kao dokaz o kupnji za bilo kakve jamstvene zahtjeve.
10. Podrška
If you encounter any issues or have questions regarding your Gebildet push button switch that are not covered in this manual, please contact Gebildet customer support through their official website or the retailer from whom you purchased the product. Provide your model number (E1417) and a detailed description of the issue for faster assistance.