1. Uvod
Thank you for choosing the Globo Lighting BOSTON Outdoor Pedestal Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.
Image 1.1: The BOSTON outdoor pedestal light providing illumination along a pathway.
2. Sigurnosne upute
- Električna sigurnost: Instalaciju mora izvršiti kvalificirani električar u skladu sa svim lokalnim i nacionalnim električnim propisima. Uvijek isključite napajanje na glavnom prekidaču prije instalacije, održavanja ili zamjene žarulje.
- Upotreba na otvorenom: This fixture is designed for outdoor use. Ensure all connections are waterproof and sealed appropriately to prevent water ingress.
- Vrsta žarulje: Koristite samo E27 žarulje s navedenom snagom.tage. Nemojte prekoračiti maksimalnu vattage naznačeno na učvršćenju.
- Rukovanje: Pažljivo rukujte uređajem. Izbjegavajte ispuštanje ili izlaganje jakim udarcima.
- Čišćenje: Ne koristite abrazivna sredstva za čišćenje ili otapala. Čistite mekom,amp tkanina.
- toplina: Prije nego što pokušate zamijeniti žarulju, pustite da se potpuno ohladi.
3. Sadržaj paketa
Please check that all components are present and undamaged before beginning installation:
- 1x BOSTON Outdoor Pedestal Light Fixture (Model 105701)
- 1x postolje za montažu
- 1x Set of Mounting Hardware (screws, anchors)
- 1x korisnički priručnik
Note: E27 bulb is not typically included and must be purchased separately.
4. Specifikacije
| Značajka | Specifikacija |
|---|---|
| Broj modela | 105701 |
| Dimenzije (D x Š x V) | 12.7 x 12.7 x 80 cm |
| Težina | 1.03 kilogram |
| Materijal | Nehrđajući čelik, plastika |
| Broj žarulja | 1 |
| Voltage | 230 volti |
| Tip utičnice | E27 |
| Vlast | 1 Watt (Max. for integrated components; refer to fixture for bulb max wattage) |
| Izvor napajanja | Električni kabel |
| Potrebne baterije | Ne |
5. Postavljanje i instalacija
Važno: Ensure the main power supply is switched off at the circuit breaker before commencing installation.
- Odaberite lokaciju: Select a suitable outdoor location for the pedestal light, ensuring it is on a stable, level surface and has access to the necessary electrical wiring.
- Pripremite ožičenje: If not already present, run appropriate outdoor-rated electrical cable to the installation point. Consult a qualified electrician for this step.
- Montirajte bazu: Position the mounting base on the desired surface. Mark the drilling points through the holes in the base. Drill pilot holes and secure the base using the provided mounting hardware (screws and anchors). Ensure the base is firmly attached.
- Spojite električne žice: Carefully connect the electrical wires from your power supply to the terminals inside the fixture. Follow the standard wiring color codes (e.g., Live, Neutral, Earth). Ensure all connections are secure and properly insulated.
- Instalirajte žarulju: Insert a suitable E27 bulb (not included) into the lamp držač. Nemojte previše zatezati.
- Sigurno učvršćenje: Attach the main body of the pedestal light to the mounted base, ensuring it is securely fastened and sealed against moisture.
- Vrati snagu: Nakon što je instalacija dovršena i svi priključci su sigurni, vratite napajanje na glavnom prekidaču.
Image 5.1: The pedestal light installed on a patio, demonstrating a typical mounting scenario.
6. Upute za rad
The BOSTON Pedestal Light features an integrated motion sensor for automatic operation.
- Uključivanje: Once installed and power is restored, the light will enter a warm-up period (typically a few seconds) before the motion sensor becomes active.
- Senzor pokreta: The integrated motion sensor detects movement within its detection range. When motion is detected, the light will illuminate.
- Automatsko isključivanje: After a period of no detected motion, the light will automatically turn off. The duration of illumination is typically pre-set or adjustable via controls on the sensor (if available). Refer to the sensor's specific markings for adjustment options.
- Day/Night Sensor: The motion sensor also includes a photocell that prevents the light from activating during daylight hours, conserving energy. The light will only activate due to motion when ambient light levels are low enough.
Image 6.1: Detail of the motion sensor on the pedestal light, highlighting its detection area.
Image 6.2: The pedestal light operating at night, with the motion sensor detecting movement.
7. Održavanje
- Čišćenje: Redovito čistite učvršćenje mekom, damp cloth to remove dirt and debris. Do not use harsh chemicals or abrasive materials, as these can damage the finish or plastic components.
- Zamjena žarulje:
- Ensure the power supply to the fixture is turned off at the circuit breaker.
- Pustite da se stara žarulja potpuno ohladi prije nego što je dodirnete.
- Carefully unscrew the top cover or access panel to reach the E27 bulb.
- Unscrew the old bulb and replace it with a new E27 bulb of the correct wattage.
- Securely reattach the cover or access panel, ensuring a watertight seal.
- Vrati napajanje.
- Inspekcija: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Address any issues promptly to ensure continued safe operation.
8. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Svjetlo se ne pali. | Nema napajanja. Neispravna žarulja. Labav spoj ožičenja. |
Provjerite prekidač. Zamijenite žarulju. Inspect and secure wiring (with power off). |
| Svjetlo ostaje stalno upaljeno. | Motion sensor faulty or obstructed. Neprekidno kretanje u zoni detekcije. Postavke senzora nisu ispravne. |
Check for obstructions. Ensure no constant movement. Consult sensor manual for settings. |
| Svjetlo ne detektira kretanje. | Senzor je začepljen ili prljav. Sensor range too low. Ambient light too high (daylight sensor). |
Clean sensor lens. Adjust sensor range (if adjustable). Test at night or in darker conditions. |
| Svjetlost treperi. | Labava žarulja. Nekompatibilna žarulja. Fluktuirajuće napajanje. |
Tighten bulb. Ensure bulb is compatible. Consult electrician for power issues. |
If you experience persistent issues not covered here, please contact a qualified electrician or the product supplier.
9. Jamstvo i podrška
This product is covered by the standard warranty provided by the manufacturer. Please retain your proof of purchase for any warranty claims. For technical support or further assistance, please contact your retailer or the Globo Lighting customer service department.
Kontaktne podatke obično možete pronaći na pakiranju proizvoda ili na službenoj stranici proizvođača. webmjesto.