Vente-unique ZINEA Adjustable Bar Stools (Set of 2) - Instruction Manual

1. Uvod

Thank you for choosing the Vente-unique ZINEA Adjustable Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.

Slika 1.1: Prednja strana view of the ZINEA bar stool, showcasing the cream ribbed velvet upholstery and black metal base.

2. Sigurnosne informacije

UPOZORENJE:

• Ne prekoračujte maksimalnu nosivost 120 kg (264 lbs) per stool.
• Exercise caution when adjusting the height to prevent tipping or instability. Ensure no one is seated on the stool during height adjustment.
• Keep children away from the product during assembly. Small parts may pose a choking hazard.
• Prije upotrebe provjerite jesu li svi vijci i pričvršćivači čvrsto zategnuti. Povremeno provjeravajte i po potrebi ponovno zategnite.
• Nemojte stajati na stolici.
• Use the stools on a flat, stable surface.

3. Sadržaj paketa

Before beginning assembly, verify that all components are present and undamaged. If any parts are missing or damaged, please contact Vente-unique customer support.

• 2 x Seat Units (Cream Ribbed Velvet)
• 2 x plinski cilindri za podizanje
• 2 x Bases (Black Metal)
• 2 x Footrests (Black Metal)
• 1 x Hardware Pack (Screws, washers, Allen key, etc.)
• 1 x priručnik s uputama

4. Postavljanje (Upute za sastavljanje)

Assembly is required for these bar stools. It is recommended to assemble the stools on a soft, clean surface to prevent scratches. Two people may be helpful for certain steps.

1. Attach the Gas Lift Cylinder to the Base:

   Carefully insert the wider end of the gas lift cylinder into the central hole of the metal base. Ensure it is seated firmly. Do not remove the protective cap from the top of the gas lift cylinder until instructed.

   

   Image 4.1: Detail of the stool base and gas lift cylinder connection.
2. Ugradite oslonac za noge:

   Slide the footrest ring over the gas lift cylinder. Ensure the footrest is oriented correctly, with the flat side facing upwards. Secure the footrest to the gas lift cylinder using the provided screws and Allen key. Tighten firmly.

3. Pričvrstite sjedalicu:

   Remove the protective cap from the top (narrower end) of the gas lift cylinder. Align the central hole on the underside of the seat unit with the top of the gas lift cylinder. Carefully lower the seat onto the cylinder, applying gentle pressure until it is securely seated. The weight of the user will further secure the connection during initial use.

4. Repeat for the Second Stool:

   Follow steps 1-3 to assemble the second bar stool.

After assembly, test the stability and functionality of each stool before regular use.

5. Upute za rad

• Podešavanje visine:

  To raise the seat, lift the lever located under the seat while standing. The seat will automatically rise. To lower the seat, sit on the stool and lift the lever. The seat will descend under your weight. Release the lever at the desired height.

  

  Slika 5.1: Bočna strana view illustrating the height adjustment lever beneath the seat.

• Funkcija zakretanja:

  The seat unit is designed to swivel 360 degrees. Simply rotate the seat to your desired position.

• Oslonac za noge:

  Utilize the integrated footrest for added comfort and support, especially when the stool is at a higher setting.

6. Održavanje

• Čišćenje baršunastog tapeciranog namještaja:

  Gently vacuum the velvet fabric regularly to remove dust and debris. For spills, blot immediately with a clean, dry cloth. For stubborn stains, use a mild fabric cleaner specifically designed for velvet, testing on an inconspicuous area first. Do not rub vigorously.

• Čišćenje metalnih dijelova:

  Obrišite metalne dijelove mekom,amp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili jake kemikalije koje bi mogle oštetiti završnu obradu.
• Redovne provjere:

  Periodically inspect all screws and connections to ensure they remain tight. Re-tighten as needed to maintain stability and safety.

7. Rješavanje problema

• Stolica je klimava:

  Check all assembly screws and ensure they are fully tightened. Verify that the gas lift cylinder is properly seated in both the base and the seat mechanism.
• Podešavanje visine ne radi:

  Ensure the protective cap on the gas lift cylinder was removed during assembly. Check if the lever mechanism is obstructed or damaged. If the stool does not rise, the gas lift may be faulty and require replacement.

• Škripajući zvuk:

  Apply a small amount of silicone lubricant to the moving parts of the gas lift mechanism or the swivel plate under the seat. Avoid oil-based lubricants on fabric.

8. Specifikacije

9. Jamstvo i podrška

For warranty information, product support, or to order replacement parts, please contact Vente-unique customer service. Refer to your purchase documentation for specific warranty terms and contact details.

You can visit the official Vente-unique store on Amazon for more information: Vente-unique Amazon Store