MiBOXER TRI-PW

MiBOXER TRI-PW 500W AC Triac Dimmer User Manual

Model: TRI-PW

1. Uvod

The MiBOXER TRI-PW 500W AC Triac Dimmer is designed for precise control of lighting systems in residential and commercial environments. This device integrates WiFi and 2.4GHz technology, allowing for remote operation via compatible applications and MiBOXER remote controls. It supports triac dimming, ensuring compatibility with a wide range of lighting fixtures, including LED, halogen, and incandescent lights, for smooth and consistent dimming from full brightness to a soft glow.

MiBOXER TRI-PW 500W AC Triac Dimmer

Slika 1.1: Gotovoview of the MiBOXER TRI-PW 500W AC Triac Dimmer unit.

2. Sigurnosne informacije

  • Električne instalacije: Instalaciju treba izvršiti kvalificirani električar u skladu s lokalnim električnim propisima i propisima.
  • Prekid napajanja: Always disconnect power at the circuit breaker before installing or servicing the dimmer.
  • Voltage Kompatibilnost: Osigurajte unos voltage matches the dimmer's specifications (100-240V AC).
  • Nosivost: Do not exceed the maximum load capacity of 500W. Overloading can cause damage or fire.
  • Samo za unutarnju upotrebu: This device is intended for indoor use in dry locations. Avoid exposure to moisture or extreme temperatures.
  • Kompatibilnost: Use only with compatible dimmable lighting fixtures (LED, halogen, incandescent).

3. Sadržaj paketa

Provjerite jesu li sve komponente prisutne u paketu:

  • MiBOXER TRI-PW 500W AC Triac Dimmer Unit
  • User Manual (may be included as a separate document)
MiBOXER TRI-PW Dimmer with packaging and manual

Image 3.1: MiBOXER TRI-PW Dimmer unit shown with its packaging and a user manual.

4. Značajke proizvoda

  • Powerful 500W Capacity: Supports high-power loads, suitable for various lighting fixtures.
  • Triac Dimming Technology: Provides flicker-free dimming for LED, halogen, and incandescent lights.
  • WiFi & 2.4GHz Control: Integrates with WiFi and MiBOXER 2.4GHz systems for smartphone or remote control.
  • Push Control Compatibility: Allows for quick, on-site dimming adjustments via a push button.
  • Aplikacija i glasovno upravljanje: Compatible with major smart home platforms for app-based and voice command control.
  • Funkcija memorije: Retains previous lighting settings after power cycles.

5. Specifikacije

Značajka Detalj
Marka MIBOXER
Naziv modela TRI-PW
Posebna značajka 500W AC Triac Dimmer
Klasa frekvencijskog pojasa Jednopojasni
Standard bežične komunikacije 802.11b
Kompatibilni uređaji Podržava PUSH zatamnjenje
Preporučena upotreba Home lighting systems
Tehnologija povezivanja Wi-Fi
Kompatibilnost s pametnim domom Smart Home Compatible (e.g., Amazon Alexa, Google Assistant)
Pokrivenost LED, halogen, incandescent, high-power loads
Frekvencija 2.4 GHz
Dimenzije (približno) 117 mm (D) x 45 mm (Š) x 24 mm (V)
MiBOXER TRI-PW Dimmer dimensions diagram

Image 5.1: Technical drawing showing the approximate dimensions of the TRI-PW dimmer.

MiBOXER TRI-PW packaging dimensions

Image 5.2: Packaging dimensions for the MiBOXER TRI-PW dimmer.

6. Postavljanje i instalacija

Važno: Prije početka instalacije provjerite je li napajanje isključeno na prekidaču.

Dijagram ožičenja

The MiBOXER TRI-PW dimmer supports two primary wiring methods for integration with a push switch. Both methods are suitable for triac dimming LED lights, traditional filament lamps, i halogen lamps.

Connection Diagram for MiBOXER TRI-PW Dimmer

Image 6.1: Wiring diagrams for connecting the MiBOXER TRI-PW dimmer with a push switch.

Method 1: Single-Wire Push Switch Connection

  • Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
  • Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
  • Connect one wire from the push switch to the 'PUSH' terminal on the dimmer.
  • Connect the other wire from the push switch to the Live (L) input terminal.

Method 2: Two-Wire Push Switch Connection

  • Connect the Live (L) and Neutral (N) input wires from your power supply (100-240V~) to the corresponding 'INPUT' terminals on the dimmer.
  • Connect the Live (L) and Neutral (N) output wires to your lighting fixture (100-240V~) from the 'OUTPUT' terminals.
  • Connect the two wires from the push switch directly to the 'PUSH' terminals on the dimmer.

After wiring, secure the dimmer in a suitable electrical box or enclosure. Restore power at the circuit breaker.

7. Upute za rad

7.1. Push Switch Control

  • Kratki pritisak: Turn the lights ON or OFF.
  • Dugi pritisak: Adjust the brightness level. Release the button to set the desired brightness.

7.2. WiFi App Control

The TRI-PW dimmer supports control via a smart app (e.g., Tuya Smart app). No additional 2.4G gateway is required for app control.

  1. Download the compatible smart home app from your device's app store.
  2. Registrirajte se ili prijavite na svoj račun.
  3. Put the dimmer into pairing mode (refer to the app's instructions or the dimmer's specific pairing procedure, usually involving a long press of the 'SET' button or power cycling).
  4. Follow the in-app instructions to add the device to your network.
  5. Once connected, you can control the dimmer's ON/OFF state and brightness from your smartphone.
Smartphone controlling light dimmer via Tuya app

Slika 7.1: Primjerample of controlling the dimmer using a smartphone application.

7.3. 2.4GHz Remote Control

The dimmer can be paired with MiBOXER 2.4GHz remote controls for direct wireless control.

  1. Provjerite je li prigušivač uključen.
  2. Refer to your MiBOXER 2.4GHz remote control's manual for specific pairing instructions. Typically, this involves pressing a "Link" or "Pair" button on the remote within a few seconds of powering on the dimmer or pressing the dimmer's 'SET' button.
  3. A successful pairing is usually indicated by the connected light flashing.

7.4. Glasovno upravljanje (Alexa/Google asistent)

The TRI-PW dimmer is compatible with smart home voice assistants like Amazon Alexa and Google Assistant when integrated through a compatible smart home app.

  1. Ensure your dimmer is successfully connected to the smart home app (e.g., Tuya Smart).
  2. Otvorite aplikaciju Amazon Alexa ili Google Home.
  3. Enable the skill or service for the smart home app you are using (e.g., "Tuya Smart" skill).
  4. Discover devices. Your dimmer should appear in the list.
  5. Assign a name to your dimmer (e.g., "Living Room Light").
  6. You can now control your light using voice commands, such as "Alexa, turn on Living Room Light" or "Hey Google, dim Living Room Light to 50%."
Amazon Alexa and Google Assistant devices

Image 7.2: The dimmer is compatible with voice control platforms like Amazon Alexa and Google Assistant.

8. Održavanje

  • Čišćenje: Disconnect power before cleaning. Wipe the dimmer with a soft, dry cloth. Do not use liquid cleaners or aerosols.
  • Inspekcija: Povremeno provjeravajte spojeve ožičenja na čvrstoću i znakove istrošenosti ili oštećenja.
  • Ažuriranja firmvera: If available, check the smart home app for firmware updates to ensure optimal performance and security.

9. Rješavanje problema

Problem Mogući uzrok Otopina
Svjetla se ne pale. No power, incorrect wiring, faulty bulb, dimmer not paired. Check circuit breaker. Verify wiring according to diagrams. Test bulb. Re-pair dimmer with app/remote.
Svjetla trepere ili zuje. Incompatible bulb, overloaded circuit, loose wiring. Ensure bulbs are dimmable and compatible with triac dimmers. Reduce load. Check wiring connections.
Dimmer not responding to app/remote. Dimmer out of range, WiFi issue, not paired. Ensure dimmer is within WiFi/2.4GHz range. Check WiFi router. Re-pair dimmer with app/remote.
Ne mogu se povezati s WiFi-jem. Incorrect WiFi password, 5GHz network, dimmer not in pairing mode. Verify WiFi password. Ensure you are connecting to a 2.4GHz network. Put dimmer into WiFi pairing mode.

10. Jamstvo i podrška

This MiBOXER TRI-PW dimmer comes with a Jamstvo 2 godine od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalu i izradi pri normalnoj uporabi.

The warranty does not cover damage caused by improper installation, misuse, unauthorized modifications, or acts of nature.

For technical support or warranty claims, please contact your retailer or the manufacturer directly. Please have your purchase receipt and product model number (TRI-PW) available when contacting support.

Za više informacija možete posjetiti MiBOXER trgovina na Amazonu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.