ErGear Dual Monitor Stand Instruction Manual for 17-32 inch Monitors

Uvod

This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and use will ensure optimal performance and safety.

Sigurnosne informacije

Prije sastavljanja provjerite jesu li svi dijelovi prisutni i neoštećeni. Nemojte koristiti ako bilo koji dio nedostaje ili je neispravan.
Verify that your desk surface can support the combined weight of the stand and two monitors.
Adhere strictly to the specified monitor size and weight limits to prevent instability or damage.
Tighten all screws firmly, but do not overtighten to avoid stripping threads.
Tijekom instalacije držite podalje djecu i kućne ljubimce.
Always seek professional assistance if you are unsure about any part of the installation process.

Sadržaj paketa

Please check that all parts are included in your package:

Glavni stup
Monitor Arms (2)
C-Clamp Baza
Podnožje za montažu s ušicama
VESA Plates (2)
Komplet alata (vijci, podloške, imbus ključevi)
Isječci za upravljanje kabelima

Tehnički podaci

Vrsta montaže	Nosač za stol (C-Clamp ili ušica)
Vrsta kretanja	Okretanje, nagib, rotacija
Materijal	Legirani čelik
Boja	Crna
Kompatibilni uređaji	Monitori
Minimalna veličina zaslona	17 inča
Maksimalna veličina zaslona	32 inča
Nosivost po ruci	4.4 to 22 lbs (2-10 kg)
VESA kompatibilnost	75x75mm, 100x100mm
C-Clamp Debljina stola	0.39"-3.15" (10-80 mm)
Debljina stola za montažu ušica	0.4"-2.17" (10-55 mm)

The stand features a 16.54" tall pole and a maximum arm length of 37.8" (from center pole to monitor center).

Product dimensions of the ErGear Dual Monitor Stand, showing overall width of 31.4 inches, arm length of 15.7 inches from center, and pole height of 16.3 inches. Also illustrates C-Clamp and Grommet mount dimensions. — Figure 1: Product Dimensions. This image illustrates the key measurements of the dual monitor stand, including the overall width, individual arm reach, and the height of the central pole. It also shows the compatible desk thickness for both C-Clamp i mogućnosti montaže Grommet-a.

Kompatibilnost

Before installation, ensure your monitors meet the following criteria:

Veličina zaslona: Each monitor must be between 17 and 32 inches.
Težina: Each monitor must weigh between 4.4 lbs (2 kg) and 22 lbs (10 kg).
VESA uzorak: The back of each monitor must have VESA mounting holes with a pattern of either 75x75mm or 100x100mm.

Image showing wide compatibility of the ErGear Dual Monitor Stand, detailing VESA 75x75mm/100x100mm, C-Clamp 0.39-3.15 inch, Grommet Mount 0.39-2.17 inch, max 32 inch monitor size, and max 22 lbs weight. — Figure 2: Wide Compatibility. This image visually confirms the VESA standards, desk thickness requirements for C-Clamp and Grommet mounts, and the maximum monitor size and weight supported by the stand.

Graphic illustrating the ErGear Dual Monitor Stand designed for large monitors, showing compatibility with 17-32 inch screens and a maximum load of 22 lbs per arm. A note advises checking monitor size and weight online. — Figure 3: Designed for Large Monitors. This graphic emphasizes the stand's capacity for monitors ranging from 17 to 32 inches, with a maximum load of 22 lbs per arm. It also advises users to verify their monitor's specifications.

Image showing VESA compatibility for monitors, illustrating 75x75mm and 100x100mm patterns. It also shows how to remove a monitor's original stand if necessary and suggests a VESA adapter for monitors without VESA holes. — Figure 4: Monitor VESA Compatibility. This image clarifies how to identify VESA mounting holes on a monitor and provides guidance for monitors that may require removal of their original stand or the use of a VESA adapter.

Postavljanje

The ErGear Dual Monitor Stand offers two mounting options: C-Clamp i nosač Grommet.

Choosing Your Mounting Method

Image illustrating two ways to mount the ErGear Dual Monitor Stand: Grommet Mount for desk thickness 0.39-2.17 inches and C-Clamp Mount for desk thickness 0.39-3.15 inches. — Figure 5: Two Ways to Mount. This image demonstrates the C-Clamp and Grommet mounting options, along with their respective compatible desk thickness ranges.

C-Clamp Montaža

Pričvrstite C-Clamp base to the bottom of the main pole using the provided screws.
Postavite C-Clamp na rubu vašeg stola. Pazite da debljina stola bude između 0.39" i 3.15".
Zategnite clamp securely until the stand is stable.

Ugradnja nosača

If your desk has a grommet hole, remove its cover. Ensure the desk thickness is between 0.4" and 2.17".
Assemble the grommet mount components as per the instructions in the hardware kit.
Umetnite vijak s ušnicom kroz otvor na stolu i pričvrstite ga odozdo priloženom pločicom i maticom.

Attaching Monitors

Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit.
Slide the assembled monitor arms onto the main pole at your desired height and secure them.
Carefully lift each monitor and slide its VESA plate onto the corresponding monitor arm bracket. Ensure it clicks into place or is secured with the locking mechanism.
Adjust the tension screws on the VESA plate to prevent the monitor from tilting freely.

Upravljanje kabelima

Utilize the integrated cable management clips on the arms and main pole to route your monitor cables neatly. This helps maintain an organized workspace.

Image showing tidy cables and a clean desk, with monitor cables routed through integrated clips on the monitor stand arms and pole. — Figure 6: Tidy Cables, Clean Desk. This image demonstrates the effective use of cable management clips to keep monitor cables organized and out of sight, contributing to a clutter-free workspace.

Radne prilagodbe

The ErGear Dual Monitor Stand offers flexible adjustments for optimal viewin udobnost.

Image showing the fully adjustable features of the ErGear Dual Monitor Stand, including tilt (+65°/-45°), swivel (±90°), and 360° rotation. It also indicates a max arm length of 37.8 inches and a height of 19.09 inches. — Figure 7: Fully Adjustable. This image highlights the extensive range of motion for tilt, swivel, and rotation, allowing users to customize their monitor positions for ergonomic viewing.

Image demonstrating how to position your screen your way with the ErGear Dual Monitor Stand, showing multiple joints with +/-90 degree swivel for a wide range of motion. — Figure 8: Position Your Screen Your Way. This image illustrates the various articulation points on the monitor arms, each offering +/-90 degrees of swivel, enabling a broad spectrum of monitor positioning.

Podešavanje visine

The monitor arms can be moved up or down along the central pole. Loosen the securing knob on the pole, adjust the arms to the desired height, and then retighten the knob firmly.

Image showing ergonomic viewing with the ErGear Dual Monitor Stand, featuring a 16.54 inch tall pole for eye-level comfort and strain-free work. A person is shown comfortably using the setup. — Figure 9: Ergonomic Viewing. This image demonstrates how the 16.54-inch tall pole allows for significant height adjustment, promoting eye-level comfort and reducing strain during work.

Podešavanje nagiba

Monitors can be tilted -45° to +65°. Loosen the tilt screw on the VESA plate, adjust the monitor to your preferred angle, and then tighten the screw.

Podesivo okretanje

Each monitor arm can swivel ±90° at multiple joints, allowing you to angle your monitors independently.

Podešavanje rotacije

Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor to the desired orientation.

Four images showing different monitor orientations possible with the ErGear Dual Monitor Stand: two landscape, one landscape and one portrait, two portrait, and one portrait and one landscape. — Figure 10: Monitor Orientation Examples. This graphic illustrates various display configurations, including dual landscape, dual portrait, and mixed orientations, showcasing the 360° rotation capability.

Fine-Tuning Screen Alignment

The stand allows for micro height adjustments (0.19" / 5mm steps) to ensure perfect alignment between two monitors, even if they are of different models or sizes.

Image showing flawless screen alignment with the ErGear Dual Monitor Stand, highlighting micro height adjustment steps of 0.19 inches (5mm) for precise alignment of dual monitors. — Figure 11: Flawless Screen Alignment. This image demonstrates the micro-adjustment feature, allowing for precise vertical alignment of monitors in small increments (0.19 inches or 5mm), which is crucial for a seamless dual-screen setup.

Održavanje

Redovito provjeravajte sve vijke i spojeve kako biste bili sigurni da su ostali čvrsto pričvršćeni.
Očistite postolje mekom, damp krpom. Izbjegavajte abrazivna sredstva za čišćenje ili otapala.
Periodically inspect the monitor arms for any signs of wear or damage.

Rješavanje problema

Izdati	Mogući uzrok	Otopina
Monitor sags or does not hold position	Monitor weight exceeds capacity; tilt screw is loose.	Verify monitor weight is within 4.4-22 lbs. Tighten the tilt screw on the VESA plate.
Stalak je nestabilan	C-Clamp or Grommet mount is not tightened sufficiently.	Osigurajte C-Clamp or Grommet mount is securely fastened to the desk. Check desk thickness compatibility.
Monitori nisu ravni	Arms are not at the same height; micro-adjustment needed.	Adjust the height of each arm on the main pole. Use the micro height adjustment feature for fine-tuning.

Jamstvo i podrška

The ErGear Dual Monitor Stand comes with a Jamstvo 2 godine from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any questions regarding your product, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear webstranica za kontakt podatke.

	Instrukcja Obsługi Pompy Ciepła Basenowej Flotide Inverter Kompleksowa instrukcja instalacji i obsługi dla pompy ciepła basenowej Flotide Inverter. Dowiedz się o specyfikacjach, montażu, sterowaniu i konserwacji, aby zapewnić optymalne działanie systemu ogrzewania basenu.
	Intratone Dita Create Modular Camera Module: Technical Guide and Installation This document provides a comprehensive technical guide for the Intratone Dita Create modular camera module (model 32-0003). It covers product overview, technical specifications, installation instructions, wiring diagrams, configuration steps via the Intratone management site, and compliance information. Includes details on audio and video call capabilities for the 4G IP module.
	TooQ DB1702TN-B Dual Monitor Mount: Installation Guide & User Manual Comprehensive installation guide and user manual for the TooQ DB1702TN-B dual monitor mount. Supports 17-32 inch screens, VESA 75x75/100x100, up to 9kg per arm. Learn how to safely set up your dual monitor stand.
	TooQ DB1202TN-B Dual Monitor and Laptop Desk Mount User Manual User manual for the TooQ DB1202TN-B desk mount, a versatile stand designed for two monitors (17"-32") and a laptop. Includes installation instructions, parts list, and warranty information.
	VEVOR Upute za uporabu obloge za bazen Korisnički priručnik za VEVOR bazenske obloge, koji obuhvaća sigurnost, ugradnju, specifikacije proizvoda i njegu. Pronađite pravu bazensku oblogu za svoje potrebe.
	Servisni priručnik za Everwell inverter klima uređaj Sveobuhvatni servisni priručnik za Everwell inverterske klima uređaje, koji obuhvaća tehničke informacije, instalaciju, održavanje, rješavanje problema i postupke rastavljanja za modele MKTH1215E-17, MKTH1215C-17 i druge.

ErGear B0DP1YZNFF

Upute za uporabu ErGear stalka za dva monitora