URintells Cuising Espresso Machine with Grinder

1. Proizvod je gotovview

The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, is designed to provide a complete coffee brewing experience at home. This all-in-one machine features an integrated conical burr grinder, a 58mm portafilter, and a powerful steam wand for milk frothing. Its intuitive controls and robust construction ensure consistent, high-quality espresso and milk-based beverages.

Slika 1.1: The URintells Cuising Espresso Machine with Grinder, Model EM7110-US, showcasing its sleek stainless steel design and integrated components.

Slika 1.2: The espresso machine with its dimensions: 12.6 inches deep, 13.19 inches wide, and 16.14 inches high, illustrating its compact design for various spaces.

2. Sigurnosne informacije

Please read all safety instructions carefully before operating the appliance. Retain this manual for future reference.

• Ensure the machine is placed on a stable, level surface away from heat sources and water.
• Ne uranjajte uređaj, kabel za napajanje ili utikač u vodu ili druge tekućine.
• Isključite stroj iz električne utičnice prije čišćenja ili kada ga ne koristite.
• Držite djecu i kućne ljubimce podalje od uređaja tijekom rada.
• Koristite samo pribor i nastavke koje preporučuje proizvođač.
• Ne koristite stroj ako je kabel za napajanje ili utikač oštećen.
• Budite oprezni pri rukovanju vrućim površinama i parom.

3. Postavljanje

3.1 Raspakiranje i početno čišćenje

Carefully remove all packaging materials. Inspect the machine for any damage. Before first use, it is essential to clean all removable parts that will come into contact with coffee or water.

1. Remove Yellow Cap: Locate and remove the yellow protective cap from the bottom of the water tank or pump mechanism. This cap is for shipping protection only.
2. Komponente za pranje: Wash the water tank, portafilter, filter baskets, drip tray, and bean hopper with warm, soapy water. Rinse thoroughly and dry completely.
3. Stroj za brisanje: Obrišite vanjski dio stroja oglasomamp tkanina.

Slika 3.1: Visual guide for initial setup, including removing the yellow cap, washing parts, and starting the initial program.

3.2 Prva uporaba i priprema za pranje

After cleaning, the machine needs to be primed to ensure proper water flow.

1. Napunite spremnik za vodu: Napunite spremnik za vodu svježom, hladnom vodom do oznake MAX. Provjerite je li spremnik sigurno postavljen u uređaj.
2. Uključivanje: Plug the machine into a grounded power outlet. Press the UKLJUČENO/ISKLJUČENO button. The machine will perform an initial startup program.
3. Run Water Cycle: Place a large container under the portafilter head and steam wand. Press any brew button (e.g., Single Shot or Double Shot) to run a cycle without coffee. This flushes the system and primes the pump. Repeat this process for the steam wand by activating the steam function to release water until steam appears.

4. Upute za rad

4.1 Mljevenje zrna kave

The integrated conical burr grinder offers 15 precise settings to achieve the ideal grind size for your espresso.

Slika 4.1: The 15-level conical burr grinder, showing settings from coarse (15) to fine (1) for optimal coffee extraction.

1. Napunite spremnik za zrna: U spremnik za zrna dodajte svježa, cijela zrna kave.
2. Odaberite veličinu mljevenja: Adjust the grind size dial. For espresso, a setting between 3 i 5 is generally recommended. Experiment to find your preferred setting.
3. Mljevena kava: Place the portafilter under the grinder outlet. Press the portafilter against the grinding button to start grinding. The machine will dispense the set amount of ground coffee.

4.2 Kuhanje espressa

Achieve a rich and full-bodied espresso with the 58mm extraction system and 15-bar ULKA pump.

Slika 4.2: Step-by-step guide for brewing espresso, from preheating to extraction.

1. Umetnite košaru filtera: Place the appropriate filter basket (single or double shot) into the portafilter.
2. Doza i Tamp: Fill the filter basket with 14-16g of ground coffee for a single espresso or 20-22g for a double espresso. Tamp kavu ravnomjerno i čvrsto koristeći priloženi tampovaj
3. Pričvrstite portafilter: Securely attach the portafilter to the group head by inserting it and rotating it to the right until it locks into place.
4. Kup mjesta: Postavite šalicu/e za espresso na posudu za kapanje direktno ispod izljeva portafiltera.
5. Odaberite napitak: Pritisnite tipku Single Shot or Dvostruki hitac button. The machine will pre-infuse the coffee before beginning extraction.
6. Zaustavi ekstrakciju: The machine will automatically stop the extraction based on programmed volume. You can manually stop it at any time by pressing the brew button again.

Slika 4.3: Espresso being extracted, demonstrating the 15-bar ULKA pump for optimal pressure.

Slika 4.4: Close-up of the 58mm extraction system, ensuring even saturation of coffee grounds.

4.3 Pjenjenje mlijeka

The professional steam wand allows you to create creamy microfoam for lattes and cappuccinos.

1. Pripremite mlijeko: Napunite vrč za pjenjenje od nehrđajućeg čelika hladnim mlijekom (mliječnim ili biljnim) do ispod izljeva.
2. Aktivirajte Steam: Pritisnite tipku Steam button. Wait for the steam indicator light to illuminate, indicating the machine has reached steaming temperature.
3. Čišćenje parne cijevi: Postavite cijev za paru iznad posude za kapanje i nakratko otvorite gumb za paru kako biste ispustili kondenziranu vodu. Zatvorite gumb.
4. Pjenasto mlijeko: Immerse the tip of the steam wand just below the surface of the milk. Open the steam knob fully. Angle the pitcher to create a swirling motion. For microfoam, keep the tip near the surface to incorporate air. For hotter milk, immerse the tip deeper.
5. Zaustavite kuhanje na pari: Once the desired temperature and texture are achieved, close the steam knob and remove the pitcher.
6. Očistite parnu cijev: Odmah obrišite cijev za paru oglasomamp krpom uklonite ostatke mlijeka. Ponovno nakratko otvorite gumb za paru kako biste izbacili mlijeko iz cijevi.

Slika 4.5: The professional steam wand in action, creating frothed milk for various coffee beverages.

4.4 Control Panel and Settings

The machine features an intuitive LCD display and easy-to-use buttons and dial for various functions.

Slika 4.6: The LCD display and control buttons, allowing customization of grind, shot volume, and other settings.

• Tipka ON/OFF: Uključuje ili isključuje stroj.
• tipka START/STOP: Pokreće ili zaustavlja proces kuhanja.
• Gumb SET: Used to navigate menus and adjust settings displayed on the LCD.
• Single/Double Espresso Buttons: Initiates a single or double shot espresso brew.
• Gumb za paru: Aktivira funkciju pare za pjenjenje mlijeka.
• Hot Water Button: Ispušta vruću vodu.
• DESCALE Indicator: Illuminates when descaling is required.

4.5 Adjusting Brewing Temperature and Descale Reminder

You can customize the brewing temperature and set the descaling reminder frequency.

Slika 4.7: Instructions for setting brewing temperature (Low, Medium, High) and descale reminder (500, 1000, 1500 cups).

• Brewing Temperature: With the machine off, press and hold the START/STOP i Jedna čaša buttons for 2 seconds to enter temperature setting mode. Use the SET knob to select Low (149°F), Medium (158°F), or High (167°F).
• Descale Reminder: With the machine off, press and hold the START/STOP i Dvostruka čaša buttons for 2 seconds to enter descale reminder setting mode. Use the SET knob to select 500, 1000, or 1500 cups.

5. Održavanje

Redovito čišćenje i održavanje osiguravaju optimalne performanse i dugotrajnost vašeg aparata za espresso.

5.1 Dnevno čišćenje

Slika 5.1: Visual guide for daily cleaning of the portafilter, drip tray, bean hopper, and steam wand tip.

• Portafilter i filter košare: After each use, remove the portafilter and discard the spent coffee grounds. Rinse the portafilter and filter basket under hot water.
• Parna šipka: As described in Section 4.3, clean the steam wand immediately after frothing milk.
• Pladanj: Empty and clean the drip tray daily or when the 'Empty Me' indicator appears.
• Voditelj grupe: Koristite oglasamp cloth to wipe the group head screen and gasket to remove any coffee residue.

5.2 Uklanjanje kamenca

Descaling removes mineral buildup from the machine's internal components, which is crucial for performance and taste. The machine has a descaling reminder system.

Slika 5.2: Step-by-step instructions for the descaling process, including adding descaling agent, running cycles, and refilling the water tank.

1. Pripremite otopinu za uklanjanje kamenca: Mix a descaling agent with water according to the descaler manufacturer's instructions. Pour the solution into the water tank.
2. Enter Descale Mode: Kada je OLJUŠTITI indicator lights up, rotate the SET knob to the 'CLEAN' mode.
3. Start First Stage: Pritisnite tipku START/STOP button to begin the first descaling stage. The machine will run the solution through its system.
4. Ispraznite i ponovno napunite: Once the first stage is complete, discard the remaining solution from the water tank and rinse the tank thoroughly. Refill the water tank with fresh, clean water.
5. Start Second Stage: Pritisnite tipku START/STOP button again to begin the second stage, which rinses the machine with clean water.
6. Završetak: Nakon drugog stage, the descaling process is complete, and the machine will return to standby mode.

6. Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti pri radu s aparatom za espresso.

If you encounter an issue not listed here or if the suggested solutions do not resolve the problem, please contact URintells Cuising customer support.

7. Specifikacije

8. Jamstvo i podrška

8.1 Jamstvo za proizvod

Please refer to the product packaging or the official URintells Cuising website for specific warranty terms and conditions. Typically, products are covered against manufacturing defects for a defined period from the date of purchase.

8.2 Prošireni planovi zaštite

Extended protection plans may be available for purchase to provide additional coverage beyond the standard manufacturer's warranty. These plans offer peace of mind for a longer duration.

• Dvogodišnji plan zaštite: Dostupno za 48.99 USD (jednokratno plaćanje).
• Dvogodišnji plan zaštite: Dostupno za 63.99 USD (jednokratno plaćanje).
• Potpuna zaštita: A monthly plan at $16.99/month, covering eligible past and future purchases.

Za detalje o kupnjiasing or activating these plans, please consult your retailer or the plan provider.

8.3 Korisnička podrška

For technical assistance, troubleshooting, or warranty claims, please contact URintells Cuising customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (EM7110-US) and proof of purchase readily available.