JENABOM 3.6V Cordless Electric Screwdriver User Manual

1. Sigurnosne upute

Please read and understand all safety warnings and instructions before operating this electric screwdriver. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

• Sigurnost radnog područja: Radno mjesto održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisutnost zapaljivih tekućina, plinova ili prašine.
• Električna sigurnost: Izbjegavajte kontakt tijela s uzemljenim površinama poput cijevi, radijatora, štednjaka i hladnjaka. Postoji povećani rizik od strujnog udara ako je vaše tijelo uzemljeno. Ne izlažite električne alate kiši ili vlazi. Ulazak vode u električni alat povećat će rizik od strujnog udara.
• Osobna sigurnost: Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite ispravan električni alat za svoju primjenu. Ispravan električni alat će bolje i sigurnije obavljati posao brzinom za koju je dizajniran. Isključite bateriju iz električnog alata prije bilo kakvih podešavanja, promjene pribora ili pohranjivanja električnih alata.

2. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u vašem paketu:

• JENABOM 3.6V Cordless Electric Screwdriver
• USB kabel za punjenje
• 105-piece Accessory Set (various screwdriver bits, drills, screws, extension rods, magnetizer)
• Kutija za pohranu

This image displays the JENABOM 3.6V Cordless Electric Screwdriver, its USB charging cable, and the comprehensive 105-piece accessory kit, including various screwdriver bits, sockets, and a storage case.

The complete JENABOM electric screwdriver kit, including the tool and all 105 accessories, neatly stored in its dedicated carrying case for organization and portability.

3. Proizvod je gotovview

Familiarize yourself with the components of your electric screwdriver:

• Hex Collet: Accepts standard 1/4 inch (6.35mm) bits.
• LED radno svjetlo: Osvjetljava radno područje.
• Tipke za naprijed/natrag: Controls the rotation direction.
• Charging and Torque Gear Indicator: Displays battery level and selected torque setting.
• USB priključak za punjenje: Za ponovno punjenje unutarnje baterije.
• Anti-slip Handle: Ergonomski dizajniran za udoban hvat.

This diagram illustrates the main features of the screwdriver, including the USB charging port, the 1/4 inch hex collet for standard bits, the LED indicator for charge and torque settings, and the forward/reverse control buttons.

4. Postavljanje

4.1. Charging the Screwdriver

Before first use, fully charge the screwdriver. The built-in 1300mAh lithium-ion battery typically requires 3-5 hours for a full charge.

1. Pronađite USB priključak za punjenje na odvijaču.
2. Connect the provided USB charging cable to the screwdriver's port.
3. Connect the other end of the USB cable to a compatible USB power source (e.g., computer, power bank, wall adapter).
4. The charging indicator lights will show the charging status. Once fully charged, the indicator will show a full battery.

The image shows the JENABOM electric screwdriver connected to a laptop via its USB cable for charging, demonstrating its convenient and versatile charging options.

4.2. Inserting Screwdriver Bits

The screwdriver features a magnetic hex collet for easy bit changes.

1. Select the appropriate 1/4 inch hex bit for your task.
2. Push the bit firmly into the hex collet until it is securely seated. The magnetic design will hold the bit in place.
3. To remove, simply pull the bit straight out.

This image illustrates the magnetic design of the screwdriver's chuck, allowing for quick and easy insertion and removal of screwdriver bits, both directly and with an extension pole.

5. Operacija

5.1. Uključivanje/isključivanje i upravljanje smjerom

The screwdriver is activated by pressing and holding the appropriate button.

1. Rotacija naprijed: Press and hold the forward button (usually indicated by an arrow pointing right or up) for 1 second to start driving screws.
2. Obrnuta rotacija: Press and hold the reverse button (usually indicated by an arrow pointing left or down) for 1 second to remove screws.
3. Otpustite gumb da biste zaustavili odvijač.

This image illustrates the forward and reverse control buttons on the screwdriver, indicating that a 1-second press is required to initiate operation and switch between modes.

5.2. Podešavanje zakretnog momenta

The screwdriver features four adjustable torque settings, allowing you to match the power to the task and prevent over-tightening or damage.

1. The torque setting can be adjusted using the dedicated torque adjustment button or by cycling through the settings with the main power button (refer to the indicator lights).
2. Available torque levels range from 2.5 N.m to 5 N.m.
3. Select a lower torque for delicate tasks (e.g., electronics, soft materials) and a higher torque for more demanding applications (e.g., furniture assembly, harder materials).
4. When the set torque is reached, the mechanical clutch will disengage, preventing further tightening.

This graphic provides essential technical data for the screwdriver, detailing its 3.6V operating voltage, 1300mAh battery capacity, 200 RPM no-load speed, and the adjustable torque range from 2.5 N.m to 5 N.m across four settings.

This image demonstrates the functionality of the adjustable 4-level torque system, showing how it prevents damage to screws or materials by disengaging the clutch when the set torque is reached.

5.3. LED radno svjetlo

The integrated LED work light automatically activates when the screwdriver is in operation, providing illumination for dark or confined spaces.

An image depicting the screwdriver in operation, with its built-in LED work light actively illuminating the work area, enhancing visibility in low-light conditions.

This image highlights the effectiveness of the LED working light, demonstrating how it provides crucial illumination in dark environments for improved visibility during tasks.

6. Održavanje

Regular maintenance ensures optimal performance and extends the life of your screwdriver.

• Čišćenje: Održavajte ventilacijske otvore alata čistima kako biste spriječili pregrijavanje. Koristite meku,amp krpom za čišćenje vanjštine. Nemojte koristiti jake kemikalije ili abrazivna sredstva za čišćenje.
• Briga o bitovima: Store screwdriver bits in the provided case to prevent loss and damage. Replace worn or damaged bits to ensure efficient and safe operation.
• Skladištenje: Store the screwdriver and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.

7. Rješavanje problema

Ako naiđete na probleme, pogledajte sljedeće uobičajene probleme i rješenja:

8. Specifikacije

Key technical specifications for the JENABOM 3.6V Cordless Electric Screwdriver:

9. Jamstvo i podrška

For warranty information or technical support, please contact JENABOM customer service. Details can typically be found on the product packaging or the official JENABOM webmjesto.

If you are not satisfied with your purchase, please feel free to contact us. JENABOM will reply to you within 24 hours.