XPG VALOR AIR PLUS Mid-Tower PC kućište Korisnički priručnik

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your XPG VALOR AIR PLUS Mid-Tower PC Chassis. Please read this manual thoroughly before beginning assembly to ensure proper installation and to prevent damage to your components. The XPG VALOR AIR PLUS is designed to accommodate mid- to high-end PC components, offering robust cooling and expandability.

Figure 1: XPG VALOR AIR PLUS Mid-Tower PC Chassis (White) with illuminated ARGB fans.

2. Sigurnosne informacije

• Always disconnect the power supply from the wall outlet before installing or removing any components to prevent electric shock.
• Handle all components with care to avoid damage. Static electricity can harm sensitive electronic parts. Consider using an anti-static wrist strap.
• Držite male dijelove i materijale za pakiranje dalje od djece.
• Osigurajte odgovarajuću ventilaciju oko kućišta kako biste spriječili pregrijavanje.
• Do not attempt to modify the chassis or its components, as this may void your warranty and pose safety risks.

3. Sadržaj paketa

Prije nego što nastavite s instalacijom, provjerite jesu li svi elementi prisutni u paketu:

• XPG VALOR AIR PLUS Mid-Tower PC Chassis
• Kutija s priborom (vijci, vezice za kabele, odstojnici itd.)
• Korisnički priručnik (ovaj dokument)
• Pre-installed 120mm ARGB Fans (4 units, in select models)

4. Proizvod je gotovview

Familiarize yourself with the various parts of the XPG VALOR AIR PLUS chassis.

4.1 Prednja ploča

Figure 2: Front panel with magnetic mesh design for optimal airflow.

The front panel features a magnetic mesh design, allowing for easy removal and excellent airflow. This design also highlights the pre-installed ARGB fans.

4.2 Top I/O Panel

Figure 3: Top I/O panel with USB ports, audio jacks, and power/reset buttons.

The top I/O panel includes: Power Button, Reset Button, 2x USB 3.2 Type-A ports, Headphone Jack, and Microphone Jack.

4.3 Unutarnji raspored

Figure 4: Internal structure highlighting motherboard compatibility and fan locations.

The spacious interior supports various motherboard form factors (Micro ATX, ATX) and offers multiple mounting points for fans and radiators. It features a dedicated PSU shroud for a clean build.

5. Postavljanje i instalacija komponenti

Follow these steps to install your PC components into the XPG VALOR AIR PLUS chassis.

5.1 Priprema

• Gather necessary tools: Phillips head screwdriver, cable ties (included), anti-static wrist strap (recommended).
• Prepare a clean, flat workspace.
• Remove the side panels. Typically, these are secured with thumbscrews at the rear of the chassis.

Slika 5: Eksplodirano view demonstrating removable panels and dust filters for easy access and maintenance.

5.2 Instalacija matične ploče

1. Install the I/O shield into the rear opening of the chassis (if not pre-attached to your motherboard).
2. Align the motherboard with the pre-installed standoffs. Ensure the screw holes on the motherboard match the standoffs.
3. Pričvrstite matičnu ploču odgovarajućim vijcima iz kutije s priborom.

5.3 Instalacija jedinice za napajanje (PSU)

1. Pronađite područje za montažu napajanja na donjoj stražnjoj strani kućišta.
2. Slide the PSU into position from the rear.
3. Pričvrstite napajanje vijcima iz kutije s priborom.

5.4 Instalacija pogona za pohranu

The chassis supports 2.5" SSDs and 3.5" HDDs. Refer to the chassis interior for specific mounting locations (e.g., behind the motherboard tray, drive cages).

• For 2.5" SSDs: Secure with screws to designated mounting points.
• For 3.5" HDDs: Slide into drive cages and secure with screws or tool-less mechanisms.

5.5 Graphics Card (GPU) and Expansion Card Installation

1. Uklonite potrebne poklopce PCIe utora sa stražnje strane kućišta.
2. Insert the graphics card or other expansion card into the appropriate PCIe slot on the motherboard.
3. Secure the card with the provided screw or retention clip.

5.6 Upravljanje kabelima

Figure 6: Rear interior view demonstrating cable routing channels and tie-down points.

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. Use the included cable ties to secure bundles.

5.7 Connecting Front Panel I/O

Connect the front panel cables (Power SW, Reset SW, HDD LED, Power LED, USB 3.2, HD Audio) to the corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

6. Upute za rad

6.1 Prvo uključivanje

1. Ensure all components are securely installed and all necessary cables are connected.
2. Close and secure the side panels.
3. Connect your monitor, keyboard, mouse, and power cable to the PSU.
4. Okrenite prekidač za napajanje na PSU-u u položaj 'UKLJUČENO'.
5. Press the Power Button on the top I/O panel of the chassis.

6.2 ARGB upravljanje ventilatorom

The pre-installed ARGB fans can be controlled via your motherboard's ARGB software (if connected to a compatible header) or through a dedicated ARGB controller (if included with your specific model or purchased separately). Refer to your motherboard manual or ARGB controller instructions for detailed customization options.

7. Održavanje

Redovito održavanje pomaže u osiguravanju optimalnih performansi i dugovječnosti komponenti vašeg računala.

7.1 Cleaning the Chassis

• Koristite meku, damp cloth to wipe down exterior surfaces. Avoid abrasive cleaners.
• For interior cleaning, use compressed air to remove dust from components and fan blades. Ensure the system is powered off and unplugged before cleaning.

7.2 Dust Filter Maintenance

The XPG VALOR AIR PLUS features removable dust filters (e.g., front, top, bottom). Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the chassis.

1. Pažljivo uklonite filtere za prašinu.
2. Clean them with water and mild soap, or use a vacuum cleaner/compressed air.
3. Prije ponovne ugradnje provjerite jesu li filteri potpuno suhi.

8. Rješavanje problema

Ovaj odjeljak obrađuje uobičajene probleme s kojima se možete susresti.

8.1 System Does Not Power On

• Provjerite priključke napajanja: Ensure the PSU is properly connected to the wall outlet and the PSU's power switch is ON. Verify all internal power cables (24-pin ATX, CPU, GPU, etc.) are securely connected to the motherboard and components.
• Priključci prednje ploče: Confirm that the Power SW cable from the chassis is correctly connected to the motherboard's front panel header.
• Funkcionalnost napajanja: If possible, test the PSU with another system or use a PSU tester.

8.2 Fans Not Spinning / ARGB Not Lighting Up

• Snaga ventilatora: Ensure fan power cables are connected to appropriate headers on the motherboard or a fan controller.
• ARGB veze: Verify ARGB cables are connected to a compatible 3-pin 5V ARGB header on the motherboard or an ARGB controller. (Note: Do not connect 5V ARGB to 12V RGB headers).
• Software/Controller: Check your motherboard's BIOS/UEFI settings or ARGB software for fan speed and lighting control.

8.3 Poor Airflow / High Temperatures

• Filteri za prašinu: Clean all dust filters regularly.
• Orijentacija ventilatora: Ensure fans are oriented correctly for optimal intake and exhaust airflow.
• Uprava za kabele: Poboljšajte upravljanje kabelima kako biste smanjili prepreke protoku zraka.

9. Specifikacije

Napomena: Specifikacije su podložne promjenama bez prethodne najave.

10. Jamstvo i podrška

XPG products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the official XPG webweb-mjesto ili jamstveni list koji ste dobili s proizvodom.

Korisnička podrška

If you encounter any issues or have questions regarding your XPG VALOR AIR PLUS chassis, please contact XPG customer support through their official website. Have your product model number (VALORAIRPLUSMTA-WHCWW) and proof of purchase ready when contacting support.

Posjetite XPG trgovina na Amazonu za više informacija i proizvoda.