Uvod
This manual provides detailed instructions for the Keychron K10 Version 2 QMK Wireless Mechanical Gaming Keyboard. It covers initial setup, operational procedures, maintenance guidelines, troubleshooting tips, and product specifications to ensure optimal use of your device.
Image: The Keychron K10 Version 2 mechanical keyboard, showcasing its full-size layout and design on a modern desk setup.
Postavljanje
1. Sadržaj paketa
Provjerite jesu li prisutne sve komponente:
- Keychron K10 Version 2 Keyboard
- USB-C na USB-A kabel
- Izvlakač ključeva
- Skidač prekidača
- Korisnički priručnik (ovaj dokument)
- Additional Keycaps (for Mac/Windows layout customization)
2. Početno punjenje
Before first use, connect the keyboard to a USB power source using the provided USB-C cable. The charging indicator light will show the charging status. A full charge is recommended for optimal wireless performance.
The K10 Version 2 features a 4000mAh battery capacity.
3. Načini povezivanja
The keyboard supports both wireless (Bluetooth 5.1) and wired (USB-C) connections.
- Ožičeni način: Connect the USB-C cable to the keyboard and your computer. The keyboard will automatically switch to wired mode.
- Bluetooth način rada:
- Toggle the switch on the side of the keyboard to "Bluetooth".
- Pritisnite i držite Fn + 1 (ili Fn + 2, Fn + 3) key combination for 4 seconds until the '1' (or '2', '3') key flashes rapidly. This indicates the keyboard is in pairing mode.
- On your device (laptop, phone, tablet), search for Bluetooth devices and select "Keychron K10 V2".
- Once connected, the corresponding key ('1', '2', or '3') will stop flashing.
- Tipkovnica se može istovremeno povezati s do tri uređaja. Prebacujte se između uparenih uređaja pritiskom na Fn + 1, Fn + 2, ili Fn + 3.
Image: The Keychron K10 Version 2 keyboard shown connected wirelessly to a laptop, desktop monitor, and tablet, illustrating its multi-device Bluetooth capability.
4. Operating System Layout Switch
The keyboard is compatible with both Mac and Windows operating systems. Use the OS switch located on the side of the keyboard to select the appropriate layout.
- Mac način rada: For macOS devices.
- Način pobjede: Za Windows uređaje.
Slika: Krupni plan view of the top right section of the Keychron K10 Version 2 keyboard, highlighting the Num Lock, Caps Lock indicators, and the dedicated Mac and Windows layout keys.
Upute za rad
1. Backlight Control (RGB Version)
The K10 Version 2 features an RGB backlight. Use the following key combinations to control the lighting effects:
- Fn + tipka za svjetlo (ikona žarulje): Promjenjujte različite efekte pozadinskog osvjetljenja.
- Fn + strelica lijevo / strelica desno: Adjust backlight color (for static RGB modes).
- Fn + strelica gore / strelica dolje: Podesite svjetlinu pozadinskog osvjetljenja.
- Fn + Plus / Minus: Adjust backlight speed (for dynamic RGB modes).
Image: The Keychron K10 Version 2 keyboard illuminated with vibrant RGB backlighting, showcasing various color effects across the keys.
2. Prilagodba QMK/VIA
The K10 Version 2 supports QMK firmware, allowing for extensive key remapping, macro creation, and shortcut customization. Use the Keychron Launcher web app for easy configuration.
- Posjetite službeni Keychron website to download or access the Keychron Launcher web aplikacija
- Connect your keyboard in wired mode to your computer.
- Follow the on-screen instructions in the Keychron Launcher to customize key functions, lighting, and macros.
Image: A screenshot of the Keychron QMK Launcher software interface, displaying a virtual keyboard layout for key remapping and customization options.
3. Ergonomska podrška
The keyboard features two levels of adjustable feet, providing typing angles of 7.7° and 11°. This allows users to select a comfortable typing position to reduce wrist strain during extended use.
Slika: Bočni profesionalacfile views of the Keychron K10 Version 2 keyboard, demonstrating its two adjustable feet settings for different typing angles (7.7° and 11°).
Održavanje
1. Čišćenje tipkovnice
Za održavanje izgleda i funkcionalnosti tipkovnice:
- Disconnect the keyboard from all power sources.
- Koristite mekanu krpu koja ne ostavlja dlačice dampvodom ili blagom otopinom za čišćenje obrišite tipke i kućište.
- Za prašinu i nečistoće između tipki koristite komprimirani zrak.
- Izbjegavajte korištenje jakih kemikalija ili abrazivnih materijala.
2. Prekidači koji se mogu brzo mijenjati
The K10 Version 2 features hot-swappable switches, allowing you to change mechanical switches without soldering. This enables customization of your typing experience.
- Uklanjanje prekidača:
- Upotrijebite priloženi alat za izvlačenje kapica tipki kako biste pažljivo uklonili željenu kapicu tipki.
- Use the provided switch puller to grip the top and bottom clips of the switch.
- Lagano povucite prekidač ravno prema gore kako biste ga uklonili s PCB-a.
- Ugradnja prekidača:
- Align the pins of the new 3-pin or 5-pin MX mechanical switch with the holes on the PCB.
- Gently push the switch straight down until it clicks into place. Ensure the pins are not bent.
- Zamijenite kapicu tipke.
Slika: Krupni plan view of the Keychron K10 Version 2 keyboard demonstrating its hot-swappable feature, with several keycaps and switches removed to show the PCB sockets.
The PCB-mounted screw-in stabilizers for larger keys (Spacebar, Shift, Enter, Delete) are designed to reduce wobble and ensure smooth performance.
Rješavanje problema
1. Tipkovnica se ne povezuje putem Bluetootha
- Ensure the keyboard's mode switch is set to "Bluetooth".
- Verify the keyboard is in pairing mode (Fn + 1/2/3 key flashing).
- Provjerite je li Bluetooth omogućen na vašem uređaju.
- Try forgetting the device on your computer/phone and re-pairing.
- Provjerite je li baterija tipkovnice napunjena.
- Pokušajte se povezati putem žičanog načina rada kako biste potvrdili osnovne funkcije.
2. Tipke ne reagiraju
- Check if the keyboard is properly connected (wired or Bluetooth).
- Ako je u žičanom načinu rada, pokušajte s drugim USB priključkom ili kabelom.
- If in Bluetooth mode, ensure it's paired and connected to the correct device slot.
- For individual keys, check if the switch is properly seated. If it's a hot-swappable switch, try removing and re-inserting it, or replacing it with a known working switch.
- Ensure the correct OS mode (Mac/Win) is selected.
3. Problemi s pozadinskim osvjetljenjem
- Ensure the backlight is turned on (Fn + Light Key).
- Adjust brightness (Fn + Up/Down Arrow).
- If the backlight is completely off, check battery level.
- Perform a factory reset (refer to the QMK/VIA section for advanced resets if needed).
4. Ažuriranje firmvera
Periodically check the Keychron official website for firmware updates. Firmware updates can resolve bugs and improve performance. Follow the instructions provided on the Keychron website carefully when performing a firmware update.
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Marka | Keychron |
| Naziv modela | K10X-H1 |
| Tehnologija povezivanja | USB-C, Bluetooth 5.1 |
| Kompatibilni uređaji | Laptop, Phone, Tablet (Mac/Windows) |
| Opis tipkovnice | Ergonomic, Full Size (104 keys) |
| Posebne značajke | Backlit (RGB), Hot-Swappable, Hotkeys and Media Keys, Programmable Keys (QMK/VIA) |
| Tip prekidača | Linear (Super Red Mechanical Switch) |
| Izvor napajanja | Wired and Wireless (4000mAh Battery) |
| Materijal | Plastic (Enclosure) |
Jamstvo i podrška
For warranty information, technical support, or further assistance, please refer to the official Keychron website or contact Keychron customer service directly. Details regarding warranty periods and support channels are typically provided with your purchase documentation or on the manufacturer's webmjesto.
Službenik Webstranica: www.keychron.com
