Tyger Auto Tyger Access Running Boards Instruction Manual

1. Proizvod je gotovview

The Tyger Auto Tyger Access Running Boards are designed to provide a convenient and secure step for easier entry and exit from your vehicle. Constructed from durable carbon steel with a textured black finish, these running boards offer corrosion and rust resistance for various weather conditions.

This manual provides detailed instructions for installation, usage, maintenance, and troubleshooting for your Tyger Access Running Boards.

Image 1.1: The Tyger Auto Tyger Access Running Boards, featuring a textured black finish and integrated drop steps.

2. Fitment Information

These running boards are specifically designed for:

• Vozilo: Toyota Tacoma 2024-2026
• Vrsta kabine: Double Cab (4 full-size doors)
• Kompatibilnost: Includes Hybrid models

Important: These running boards are NOT compatible with Access Cab (2 full-size front doors & 2 suicided rear doors) or Regular Cab (2 doors only) models.

Image 2.1: Visual guide to confirm your truck's cab type. Ensure your vehicle is a Double Cab with four full-size doors for proper fitment.

3. Postavljanje i instalacija

3.1. Uključene komponente

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• Vozačeva bočna daska
• Bočna daska na strani suvozača
• All necessary hardware and mounting brackets
• Vodič za instalaciju (ovaj dokument)

3.2. Koraci instalacije

Installation is a direct bolt-on process and typically takes approximately 20 minutes. It is recommended to have assistance for easier handling and positioning of the running boards.

1. Pripremite vozilo: Parkirajte vozilo na ravnoj površini i povucite parkirnu kočnicu.
2. Odredite točke montaže: Locate the factory mounting points on the rocker panel beneath the vehicle's doors.
3. Pričvrstite zagrade: Secure the provided mounting brackets to the vehicle's frame using the supplied hardware. Do not fully tighten at this stage.
4. Pozicija na trkaćoj ploči: Carefully lift and align the running board with the attached brackets.
5. Sigurna daska za trčanje: Attach the running board to the brackets using the remaining hardware.
6. Podesite i zategnite: Adjust the running board for desired positioning and ensure it is level. Once satisfied, fully tighten all bolts and nuts securely.
7. Ponovite za drugu stranu: Slijedite iste korake za suprotnu stranu vozila.

Image 3.1: Tyger Access Running Board installed on a vehicle, demonstrating its appearance and integration.

4. Upute za rad

The Tyger Access Running Boards are designed for straightforward use. To operate:

• Ensure the running boards are securely installed before use.
• When entering or exiting the vehicle, place your foot firmly on the anti-slip step surface.
• The anti-slip step design provides enhanced traction for safe entry and exit in various conditions.

Image 4.1: Detail of the 4-inch wide anti-slip step, designed for secure footing.

5. Održavanje

To ensure the longevity and appearance of your Tyger Access Running Boards, follow these maintenance guidelines:

• Redovito čišćenje: Clean the running boards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured black finish.
• Inspekcija: Regularly inspect all mounting hardware for tightness. Re-tighten any loose bolts or nuts to maintain structural integrity.
• Zaštita završne obrade: The textured black finish is designed for excellent corrosion and rust resistance. However, promptly address any deep scratches or chips to prevent potential rust formation.

Image 5.1: Illustration of the superior rust resistance provided by Tyger's signature textured black finish, including pre-treatment and E-coating.

6. Rješavanje problema

Ako naiđete na bilo kakve probleme s vašim podnožjima, razmotrite sljedeće:

• Loose Feeling: If the running boards feel loose or unstable, re-check all mounting bolts and nuts. Ensure they are tightened to the manufacturer's specifications.
• Neuobičajeni zvukovi: Inspect for any contact points between the running board and the vehicle's undercarriage. Adjust positioning or re-tighten hardware as needed.
• Poteškoće s instaliranjem: Refer back to the installation steps and diagrams. Ensure correct orientation of brackets and running boards. Verify vehicle fitment (Double Cab).

Za trajne probleme koje ovi koraci nisu riješili, obratite se korisničkoj podršci.

7. Specifikacije

Image 7.1: Detailed dimensions of the Tyger Access Running Board.

Image 7.2: Key features of the running boards, including E-coating, pre-drilled holes, Tyger end caps, and 500 lb weight capacity.

8. Informacije o jamstvu

Tyger Auto provides a Jamstvo 5 godine for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

9. Podrška

For further assistance, technical support, or warranty inquiries, please visit the official Tyger Auto webweb-mjesto ili se obratite njihovoj službi za korisnike putem prodavača kod kojeg je proizvod kupljen.

Više informacija i kontakt podatke možete pronaći na Tyger Auto Store on Amazon.