Upute za uporabu RAB Lighting B17 LED stupićne svjetiljke

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of the RAB Lighting B17 LED Bollard Light. This outdoor luminaire features field-adjustable wattage and selectable color temperature (CCT), designed for various outdoor applications.

Ključne značajke uključuju:

• Energy-efficient LED with a 50,000-hour lifespan.
• Podesivi wattage: 24W, 19W, or 14W.
• Selectable CCT: 3000K (Warm White), 4000K (Neutral White), or 5000K (Cool White).
• 0-10V dimming capability.
• Uvršten na UL za vlažna mjesta.
• Durable metal construction with a glass shade.

Figure 1: RAB Lighting B17 LED Bollard Light (Model B17D shown).

2. Sigurnosne informacije

UPOZORENJE: Risk of electric shock. Disconnect power before installation or servicing. Installation should be performed by a qualified electrician in accordance with all applicable national and local electrical codes.

• Osigurajte opskrbu voltage is correct for the fixture.
• Do not handle live components.
• Nosite odgovarajuću osobnu zaštitnu opremu (PPE).
• This fixture is suitable for wet locations. Ensure all connections are properly sealed to prevent water ingress.
• Ne mijenjajte uređaj. Bilo kakve preinake mogu poništiti jamstvo i stvoriti sigurnosne rizike.

3. Sadržaj paketa

Prije početka instalacije provjerite jesu li sve komponente prisutne:

• B17 LED Bollard Light Fixture
• On-Off Switch (Included Components)
• Installation Hardware (e.g., mounting bolts, gaskets) - (Assumed, not explicitly listed but typical for such products)
• Upute za uporabu (ovaj dokument)

4. Postavljanje i instalacija

Follow these steps for proper installation of the B17 LED Bollard Light:

1. Pripremite mjesto instalacije: Ensure the mounting surface is stable and level. Run electrical conduit and wiring to the desired location according to local codes.
2. Odspojite napajanje: Prije početka bilo kakvih električnih radova isključite napajanje na prekidaču.
3. Mount the Bollard: Secure the bollard base to the mounting surface using appropriate hardware. Ensure a watertight seal if required by local codes.
4. Napravite električne spojeve: Connect the fixture's wires to the supply wires. Follow standard wiring practices:
   • Black to Line (L)
   • White to Neutral (N)
   • Green/Ground to Ground (G)
   • Purple to Dimming (+) (for 0-10V dimming)
   • Gray to Dimming (-) (for 0-10V dimming)
   Provjerite jesu li svi spojevi sigurni i izolirani.
5. Odaberite Wattage i CCT: Before closing the fixture, adjust the wattage and CCT switches located inside the fixture head. Refer to Section 5 for details.
6. Secure the Fixture Head: Attach the fixture head to the bollard body, ensuring all seals are properly seated to maintain the wet location rating.
7. Vrati snagu: Turn on power at the circuit breaker and test the light.

Figure 2: The B17 Bollard Light is UL Listed and rated for wet locations, ensuring durability in outdoor environments.

5. Upute za rad

5.1. Field-Adjustable Wattage

The B17 bollard light allows you to select the desired wattage output to optimize brightness and energy consumption. A switch located inside the fixture head enables selection between 24W, 19W, and 14W.

• 24W: Maksimalna svjetlina.
• 19W: Medium brightness, reduced energy use.
• 14W: Lower brightness, maximum energy savings.

Za podešavanje: Disconnect power. Open the fixture head. Locate the wattage selection switch and move it to the desired setting. Close the fixture head and restore power.

5.2. Selectable Color Temperature (CCT)

The fixture offers three color temperature options to suit different aesthetic preferences and applications. A separate switch inside the fixture head allows selection between 3000K, 4000K, and 5000K.

• 3000K: Warm White, ideal for creating a cozy and inviting atmosphere.
• 4000K: Neutral White, suitable for general illumination and task lighting.
• 5000K: Cool White, provides bright, crisp light, often used for security or modern aesthetics.

Za podešavanje: Disconnect power. Open the fixture head. Locate the CCT selection switch and move it to the desired setting. Close the fixture head and restore power.

Figure 3: Visual representation of adjustable wattage and selectable CCT settings.

5.3. 0-10V Dimming

The B17 bollard light is compatible with 0-10V dimming systems. Connect the purple and gray dimming wires to a compatible 0-10V dimmer control. This allows for smooth adjustment of light output from 100% down to 10% (or lower, depending on dimmer specifications).

Ensure the dimmer is rated for LED loads and is compatible with 0-10V dimming protocols.

6. Održavanje

The B17 LED Bollard Light is designed for minimal maintenance due to its long LED lifespan of 50,000 hours.

• Čišćenje: Povremeno čistite vanjštinu uređaja mekom,amp krpom za uklanjanje prljavštine i ostataka. Nemojte koristiti abrazivna sredstva za čišćenje ili otapala. Prije čišćenja provjerite je li napajanje isključeno.
• Inspekcija: Annually inspect the fixture for any signs of damage, loose connections, or wear. Ensure all seals remain intact to maintain weather resistance.
• LED zamjena: LEDs are integrated and not user-replaceable. The long lifespan minimizes the need for replacement.

Figure 4: The B17 LED Bollard Light offers a long 50,000-hour operational lifespan.

7. Rješavanje problema

8. Specifikacije

9. Jamstvo i podrška

For warranty information and technical support, please contact RAB Lighting directly. Refer to the official RAB Lighting webweb-mjesto ili u dokumentaciji o kupnji za specifične uvjete jamstva i kontaktne podatke.

RAB Lighting Contact: www.rablighting.com