Transformers GK01 Wireless Mechanical Keyboard User Manual

1. Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your Transformers GK01 Wireless Mechanical Keyboard. The GK01 is a versatile keyboard featuring tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired), a 101-key layout, RGB backlighting, and hot-swappable switches for a customizable typing experience.

Figure 1.1: Transformers GK01 Wireless Mechanical Keyboard.

2. Sadržaj paketa

Molimo provjerite jesu li svi dolje navedeni artikli uključeni u vaš paket:

• Transformers GK01 Wireless Mechanical Keyboard
• USB-C na USB-A kabel
• 2.4 GHz bežični USB adapter
• 2-u-1 tipka i izvlakač prekidača
• Korisnički priručnik (ovaj dokument)
• Rezervni prekidači (2 komada)
• Poklopac tipkovnice

3. Postavljanje i povezivanje

3.1. Tri-Mode Connection Overview

The GK01 keyboard supports three connection modes: USB-C wired, 2.4GHz wireless, and Bluetooth 5.0. You can connect to up to five devices simultaneously and switch between them seamlessly.

Figure 3.1: Tri-Mode Connection Capabilities.

3.2. Žičana USB-C veza

1. Pronađite USB-C priključak na tipkovnici.
2. Spojite jedan kraj priloženog USB-C kabela na tipkovnicu.
3. Connect the other end of the USB-C cable to an available USB-A port on your computer.
4. Tipkovnica će biti automatski prepoznata i spremna za korištenje.

3.3. Bežična veza od 2.4 GHz

1. Locate the 2.4GHz wireless USB dongle.
2. Uključite adapter u dostupan USB-A priključak na računalu.
3. On the keyboard, ensure the mode switch (usually on the side or back) is set to 2.4GHz mode.
4. Tipkovnica bi se trebala automatski povezati. Ako ne, pritisnite Fn + R za pokretanje uparivanja.

Figure 3.2: USB-C Port and 2.4GHz Dongle Location.

3.4. Bluetooth 5.0 veza

The keyboard supports connecting to up to three Bluetooth devices (BT1, BT2, BT3).

1. On the keyboard, set the mode switch to Bluetooth mode.
2. Za ulazak u način uparivanja za određeni Bluetooth kanal, pritisnite i držite Fn + Q (za BT1), Fn + W (za BT2), ili Fn + E (for BT3) for 3-5 seconds until the indicator light flashes rapidly.
3. On your device (PC, tablet, smartphone), open Bluetooth settings and search for new devices.
4. Select "Transformers GK01" from the list of available devices.
5. Nakon povezivanja, indikatorska lampica na tipkovnici će prestati treptati.
6. Za prebacivanje između uparenih Bluetooth uređaja jednostavno pritisnite Fn + Q, Fn + W, ili Fn + E.

4. Osnovni rad

4.1. Keyboard Layout and Anti-Ghosting

The GK01 features a 101-key layout, providing a full set of keys including a numeric keypad. All keys are equipped with anti-ghosting technology, ensuring that every keystroke is registered accurately, even when multiple keys are pressed simultaneously.

Figure 4.1: 101-Key Layout.

4.2. Multimedia Control Knob

The dedicated knob located on the top right of the keyboard provides convenient multimedia control:

• Zakreni u smjeru kazaljke na satu: Povećajte glasnoću.
• Okrenite suprotno od smjera kazaljke na satu: Smanjenje glasnoće.
• Pritisnite prema dolje: Isključi/uključi zvuk.

Figure 4.2: Multimedia Control Knob.

4.3. Upravljanje RGB pozadinskim osvjetljenjem

The GK01 keyboard features 16.8 million color RGB backlighting with various effects.

• Fn + [Right Arrow]: Adjust 5 brightness levels.
• Fn + [Left Arrow]: Adjust 5 speed levels for dynamic effects.
• Fn + [Umetnuti]: Switch between 20 different backlight modes.
• Fn + [Enter]: Switch color order within certain modes.
• Fn + [X]: Turn off light / activate power-saving mode.
• Fn + [Backspace]: Switch color order within certain modes.

Figure 4.3: RGB Backlight Controls.

5. Napredne značajke

5.1. Prekidači koji se mogu brzo mijenjati

The GK01 keyboard is equipped with pre-lubricated Cybertron linear switches and supports solder-free hot-swapping. This allows you to easily replace switches with compatible 3-pin or 5-pin mechanical switches without soldering.

Za zamjenu prekidača:

1. Using the provided 2-in-1 keycap and switch puller, gently remove the keycap from the desired switch.
2. Insert the switch puller onto the switch, ensuring it grips the top and bottom clips of the switch.
3. Lagano povucite prekidač ravno prema gore kako biste ga uklonili s PCB-a.
4. Poravnajte pinove novog prekidača s otvorima na tiskanoj pločici. Provjerite jesu li pinovi ravni kako biste izbjegli savijanje.
5. Čvrsto pritisnite novi prekidač na mjesto dok ne klikne.
6. Ponovno pričvrstite kapicu tipke.

Figure 5.1: Hot-Swappable Switch Replacement.

5.2. Programabilni softver

The GK01 supports custom software for advanced customization, including key remapping, macro creation, and detailed RGB lighting effects.

• The software is compatible only with the Windows operating system.
• The keyboard must be connected via USB-C wired mode to use the software.
• For driver download, please visit the official Transformers Keyboard website or refer to the link provided in the product packaging.

Figure 5.2: Programmable Software Interface.

5.3. Gasket Mounted Structure

The keyboard features a five-layer sound-absorbing and shock-absorbing gasket mounted structure. This design effectively reduces hollow noise and provides a softer, more consistent typing feel by isolating the plate from the case.

Figure 5.3: Gasket Mounted Structure Components.

6. Upravljanje baterijom

The GK01 keyboard is equipped with a 4000mAh rechargeable battery.

• Punjenje: Connect the keyboard to a USB power source using the provided USB-C cable. The indicator light will show charging status.
• Trajanje baterije: A fully charged battery provides extended usage time. Actual battery life may vary based on usage patterns and RGB lighting intensity.
• Štednja energije: The keyboard will enter a power-saving sleep mode after a period of inactivity to conserve battery. Press any key to wake it up.

7. Održavanje

7.1. Čišćenje tipkovnice

• Prije čišćenja isključite tipkovnicu iz svih izvora napajanja.
• Koristite mekanu krpu koja ne ostavlja dlačice dampvodom ili blagom otopinom za čišćenje obrišite tipke i kućište.
• Za prašinu i nečistoće između tipki koristite komprimirani zrak ili malu četku.
• Izbjegavajte korištenje jakih kemikalija ili abrazivnih materijala.

7.2. Keycap and Switch Care

• The PBT keycaps are designed for durability and fade resistance.
• Refer to Section 5.1 for instructions on safely removing and replacing keycaps and switches.
• Ensure the keyboard feet are clean and free of debris for stable placement.

Figure 7.1: Adjustable Keyboard Feet.

8. Rješavanje problema

9. Specifikacije

10. Jamstvo i podrška

For information regarding warranty coverage, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official Transformers Keyboard webmjesto.

Proizvođač: transformatori