WUBEN PL01

WUBEN PL01 Pen Light Instruction Manual

Model: PL01

1. Uvod

The WUBEN PL01 is a compact, high-performance pen light designed for various applications including home use, outdoor activities, emergencies, and inspections. It features a bright 650-lumen output, dual power options (rechargeable battery or AAA batteries), IP68 waterproof rating, and a durable aluminum alloy construction. This manual provides detailed instructions for its safe and effective use.

WUBEN PL01 Pen Light

Image 1.1: The WUBEN PL01 Pen Light, showcasing svojim elegantnim dizajnom i kompaktnom veličinom.

2. Što je u kutiji

Molimo Vas da prilikom otvaranja paketa provjerite jesu li svi artikli prisutni:

  • WUBEN PL01 Pen Light x 1
  • Rechargeable Battery (pre-installed or separate) x 1
  • Type-C kabel za punjenje x 1
  • Vrpca x 1
  • Spare O-rings x 2
  • User Manual (this document) x 1
Contents of WUBEN PL01 package

Image 2.1: Contents of the WUBEN PL01 package, including the pen light, charging cable, lanyard, and spare O-rings.

3. Postavljanje

3.1 Ugradnja baterije

The WUBEN PL01 supports two power sources: the included rechargeable battery or two standard AAA batteries (not included). Ensure correct polarity during installation.

  1. Odvijte stražnji poklopac svjetiljke.
  2. Insert the rechargeable battery or two AAA batteries with the positive (+) end facing towards the head of the flashlight.
  3. Securely re-screw the tail cap until it is fully tightened.
WUBEN PL01 Dual Power Options

Image 3.1: Illustration of the dual power options for the WUBEN PL01, showing both the rechargeable battery and AAA battery configuration.

3.2 Punjenje punjive baterije

The included rechargeable battery features a built-in USB-C charging port. The flashlight itself does not have an integrated charging port.

  1. Unscrew the tail cap and remove the rechargeable battery from the flashlight.
  2. Connect the provided USB-C charging cable directly to the charging port on the battery.
  3. Drugi kraj USB-C kabela spojite na kompatibilni USB izvor napajanja (npr. zidni adapter, USB priključak računala).
  4. A red indicator light on the battery signifies that it is charging.
  5. Svjetlo indikatora će svijetliti zeleno kada je baterija potpuno napunjena.
  6. Punjenje obično traje otprilike 1.5 sata.
  7. Once charged, reinsert the battery into the flashlight and secure the tail cap.

4. Upute za rad

4.1 Uključivanje/isključivanje

To turn the WUBEN PL01 on or off, perform a full press of the tail switch button.

4.2 Prebacivanje načina rada

With the light turned on, half-press the tail switch button to cycle through the available brightness modes in the following sequence:

  • Mjesec: 1 lumen
  • Nisko: 50 lumena
  • Srednje: 150 lumena
  • Visoko: 650 lumena

The flashlight features a mode memory function, meaning it will activate in the last used brightness mode when turned on again.

WUBEN PL01 Effortless Control

Image 4.1: Diagram illustrating the tail switch operation for power on/off and mode cycling.

WUBEN PL01 Brightness Modes in Use

Slika 4.2: Primjeramples of the WUBEN PL01's four brightness modes in various practical scenarios, from facial examination to night walking.

4.3 Dual-Direction Clip Usage

The WUBEN PL01 is equipped with a versatile two-way clip, allowing for secure attachment to various items for hands-free lighting.

  • Nošenje u džepu: Attach the clip to a shirt pocket or pants pocket for easy access.
  • Backpack Strap: Secure the flashlight to a backpack strap for illumination during hikes or walks.
  • Cap Mount: Clip the flashlight to the brim of a cap to convert it into a temporary headlamp.
WUBEN PL01 Dual-Direction Clip

Image 4.3: Demonstrates the versatility of the dual-direction clip, showing the flashlight attached to a pocket, backpack strap, and cap.

5. Održavanje

5.1 Čišćenje

Za održavanje optimalnih performansi i izgleda:

  • Očistite tijelo svjetiljke mekom krpomamp krpu. Izbjegavajte jake kemikalije ili abrazivne materijale.
  • For the lens, use a clean, soft cloth specifically designed for optical surfaces.

5.2 O-ring Replacement

The PL01's IP68 waterproof rating relies on properly sealed O-rings. Periodically inspect them for any signs of wear, cracks, or damage.

  • If O-rings appear damaged, replace them with the provided spare O-rings.
  • Apply a thin layer of silicone grease to the O-rings to ensure a better seal and prevent drying.

5.3 Njega baterija

  • If the flashlight will not be used for an extended period, remove the batteries to prevent potential leakage and damage.
  • For the rechargeable battery, recharge it every 3-6 months to maintain its overall lifespan and capacity.
WUBEN PL01 Type III Hard-Anodized Aluminum

Image 5.1: The WUBEN PL01's Type III hard-anodized aluminum body, highlighting its scratch, rust, and impact resistance.

WUBEN PL01 IP68 Waterproof and Impact Resistance

Image 5.2: The WUBEN PL01 demonstrating its IP68 waterproof and 2-meter impact resistance, suitable for demanding environments.

6. Rješavanje problema

If you encounter issues with your WUBEN PL01, please refer to the following common problems and solutions:

  • Svjetlo se ne pali:
    • Ensure the batteries are installed with correct polarity.
    • Check if the rechargeable battery is charged, or if AAA batteries are new.
    • Verify that the tail cap is fully tightened. A loose tail cap can prevent electrical contact.
    • Clean the battery contacts and the contact points inside the flashlight with a clean cloth.
  • Svjetlo neočekivano treperi ili se prigušuje:
    • The battery level may be low. Recharge the included battery or replace AAA batteries.
    • Provjerite je li stražnji poklopac čvrsto zategnut.
    • Clean battery contacts and internal contact points.
  • Water ingress (if exposed to water):
    • Immediately turn off the flashlight and remove the batteries.
    • Inspect the O-rings for any damage, tears, or improper seating. Replace if necessary.
    • Ensure the tail cap was fully tightened before exposure to water.
    • Allow the flashlight to dry completely before reassembling and attempting to use it.

If the problem persists after attempting these solutions, please contact WUBEN customer support.

7. Specifikacije

ZnačajkaDetalj
ModelPL01
Izlazni načiniHigh (650 Lumens), Medium (150 Lumens), Low (50 Lumens), Moon (1 Lumen)
RuntimeHigh: 1 hour, Medium: 2.5 hours, Low: 7 hours, Moon: 125 hours
Vrsta baterijeRechargeable (Included) / 2 x AAA Battery (Not Included)
Udaljenost zraka110 metara
Vršna intenziteta snopa3000 CD
LED1 x 315D
Ocjena vodootpornostiIP68 (Submersible in 2m water for 1 hour)
Otpornost na udarce2 metara
Težina1.59 oz (s baterijom)
Dimenzije (D x D)5.31 inča x 0.59 inča
MaterijalAnodizirani aluminij
Temperatura boje5000 Kelvina
WUBEN PL01 Premium Emitter

Image 7.1: Diagram illustrating the internal components of the WUBEN PL01, focusing on the 315D LED emitter and optical system.

8. Informacije o jamstvu

WUBEN products typically come with a manufacturer's warranty. For specific warranty terms, conditions, and registration details, please refer to the official WUBEN webweb-mjesto ili kontaktirajte njihovu korisničku podršku. Sačuvajte račun kao dokaz o kupnji za bilo kakve jamstvene zahtjeve.

9. Korisnička podrška

For further assistance, product inquiries, or technical support, please visit the official WUBEN website or contact their customer service department. You can often find FAQs, troubleshooting guides, and contact information on their webmjesto.

Official WUBEN Store: WUBEN Store on Amazon

© 2025 WUBEN. Sva prava pridržana.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.