1. Introduction and Important Safety Warnings
Thank you for choosing the VEVOR US-007/36W UV Disinfection Lamp. This device utilizes advanced UV-C light and ozone generation to effectively purify air and surfaces in unoccupied spaces. Please read this manual thoroughly before use to ensure safe and optimal operation.
CRITICAL SAFETY WARNINGS:
- DANGER: UV-C RADIATION AND OZONE EMISSION. Direct exposure to UV-C light can cause severe skin and eye damage. Ozone can be harmful if inhaled in high concentrations.
- NIKADA operate this lamp in the presence of humans, pets, or plants. Ensure the area is completely clear during operation.
- Nakon svake upotrebe, THOROUGHLY VENTILATE the treated room for at least 30-60 minutes to dissipate any residual ozone before re-entry.
- Keep the device out of reach of children and individuals who cannot understand these warnings.
- Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified personnel for service.
2. Što je u kutiji
Carefully unpack all components and check for any damage. If any items are missing or damaged, please contact VEVOR customer support.
- 1 x VEVOR US-007/36W UV Disinfection Lamp
- 1 x daljinski upravljač
- 1 x Alkaline Battery (23A 12V) for Remote Controller
- 1 x Sticker for Lampshade Top
- 1 x Upute za uporabu (ovaj dokument)
3. Proizvod je gotovview
The VEVOR US-007/36W UV Disinfection Lamp is designed for comprehensive air and surface purification. It features a robust design with intuitive controls.
Image 3.1: Product Details. This image shows the main components of the VEVOR UV Disinfection Lamp, including the ABS flame-retardant lamp cover, the 110W long-lifespan light tube, the hand-operated switch on the base, and the wireless remote controller.
Ključne komponente:
- UV-C Quartz Tube: High-transmission quartz tube emitting 253.7 nm UV-C light and 185 nm UV light for ozone generation.
- ABS Flame Retardant Lamp Poklopac: Provides protection for the UV-C tube.
- Base with Control Panel: Features a hand-operated switch and digital display for timer settings.
- Bežični daljinski upravljač: Allows convenient operation from a distance, offering ON/OFF and timer functions.
Image 3.2: Control Modes. This image illustrates the two control methods: the wireless remote control and the panel control located on the device base. It also highlights the three timer levels: 0.5 hours, 1 hour, and 2 hours.
4. Postavljanje
- Raspakirajte uređaj: Carefully remove the UV Disinfection Lamp and all accessories from its packaging. Retain packaging for future storage or transport.
- Plasman: Stavite lamp on a stable, flat surface in the center of the room you wish to disinfect. Ensure there are no obstructions blocking the UV light path. The lamp is suitable for rooms up to 37 m² (approximately 400 sq ft).
- Priključak za napajanje: Uključite kabel za napajanje u standardnu električnu utičnicu (220-240 V, 50 Hz).
- Ugradnja baterije daljinskog upravljača: Open the battery compartment on the back of the remote control. Insert the provided 23A 12V alkaline battery, ensuring correct polarity (+/-). Close the compartment.
- Pripremite sobu: Before operation, ensure all people, pets, and plants are removed from the room. Close all doors and windows to contain the UV-C light and ozone.
5. Upute za rad
Lamp can be operated using either the control panel on the device base or the wireless remote control.
Korištenje upravljačke ploče:
- Osigurajte lamp is plugged in and the room is empty.
- Press the power button on the base. The lamp will typically have a delay before turning on to allow you to leave the room safely.
- Use the timer buttons on the base to select the desired disinfection duration (0.5h, 1h, or 2h).
- Once the timer is set, the lamp will begin operation after a short delay. Immediately exit the room.
Korištenje daljinskog upravljača:
- Osigurajte lamp is plugged in and the room is empty.
- Point the remote control towards the lamp.
- Press the 'ON' button to power on the lamp.
- Select the desired timer setting (0.5H, 1H, or 2H) using the corresponding buttons on the remote.
- Lamp will activate after a short delay. Immediately exit the room.
Nakon operacije:
- Once the selected disinfection cycle is complete, the lamp automatski će se isključiti.
- NEMOJTE re-enter the room immediately. Open windows and doors (from outside the room if possible) to allow for thorough ventilation.
- Ventilate the room for at least 30-60 minutes to ensure all ozone has dissipated before re-entry.
Image 5.1: Ozone and UV-C Action. This image visually represents the lamp's dual action, showing UV-C light and ozone (O3) being emitted to purify the air and surfaces within a room, covering up to 37 m².
6. Održavanje
Regular maintenance ensures the longevity and effectiveness of your UV Disinfection Lamp.
Čišćenje Lamp:
- Prije čišćenja uvijek isključite uređaj iz utičnice.
- Use a soft, dry cloth to gently wipe the exterior of the lamp and the quartz tube.
- Do not use liquid cleaners, abrasive materials, or chemical solvents, as these can damage the device or reduce the effectiveness of the UV-C tube.
- Osigurajte lamp je potpuno suh prije ponovnog uključivanja.
Zamjena baterije daljinskog upravljača:
- If the remote control becomes unresponsive, replace the 23A 12V alkaline battery.
- Open the battery compartment, remove the old battery, and insert a new one with correct polarity.
- Zbrinite stare baterije u skladu s lokalnim propisima.
7. Rješavanje problema
If you encounter issues with your VEVOR UV Disinfection Lamp, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Lamp se ne uključuje. | Nema napajanja. Baterija daljinskog upravljača je prazna. Uređaj je neispravan. | Provjerite je li kabel za napajanje sigurno uključen u ispravnu utičnicu. Zamijenite bateriju daljinskog upravljača. If the issue persists, contact VEVOR customer support. |
| Daljinski upravljač ne radi. | Baterija je prazna ili nepravilno umetnuta. Zapreka između daljinskog i lamp. Remote is too far from the lamp. | Replace the remote control battery and ensure correct polarity. Osigurajte jasnu vidljivost između daljinskog upravljača iamp. Operate the remote within its effective range. |
| Strong odor after disinfection. | Residual ozone in the air. | This is normal. Ensure thorough ventilation of the room for at least 30-60 minutes after use. |
8. Specifikacije
Detailed technical specifications for the VEVOR US-007/36W UV Disinfection Lamp.
Image 8.1: Dimensions and Specifications. This image provides a visual representation of the lamp's dimensions and lists key specifications such as model number, power, timer settings, material, wavelength, color, controller size, product size, product weight, and package contents.
| Značajka | Specifikacija |
|---|---|
| Broj modela | US-007/36W |
| Vlast | 36 W |
| Postavke mjerača vremena | 3 Levels (0.5 h / 1 h / 2 h) |
| Materijal | ABS |
| Valna duljina | 253.7 nm + 185 nm (UV-C light + Ozone) |
| Boja | Crna |
| Veličina kontrolera | 4.1 x 1.7 x 0.7 in / 105 x 45 x 18 mm |
| Dimenzije proizvoda (promjer x visina) | Φ6.5 x 16.4 in / Φ166 x 416 mm |
| Težina proizvoda | 1.3 lb / 0.6 kg ± 3% |
| Ocijenjeno svtage Frekvencija | 220-240 V, 50 Hz |
| Vijek trajanja izvora svjetlosti | 8000 sata |
| Metoda kontrole | Remote Control, Panel Control |
| Područje pokrivenosti | Do 37 m² (otprilike 400 četvornih stopa) |
9. Jamstvo i podrška
VEVOR products are designed for durability and performance. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package or visit the official VEVOR webstranicu za detaljne uvjete jamstva.
Korisnička podrška:
If you have any questions, require technical assistance, or need to report an issue, please contact VEVOR customer support through their official website or the contact information provided with your purchase. When contacting support, please have your product model number (US-007/36W) and purchase details ready.
For more information and to register your product, visit: www.vevor.com