ASMAX T20

ASMAX T20 višenamjenski startni uređaj i zračni kompresor, korisnički priručnik

Model: T20 | Brand: ASMAX

1. Uvod

The ASMAX T20 is a versatile and essential tool designed for automotive and outdoor use. It integrates a powerful 4000A peak current jump starter, a 150 PSI air compressor, a 12000mAh power bank, and an emergency LED flashlight. This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your ASMAX T20 device. Please read this manual thoroughly before first use and retain it for future reference.

2. Sigurnosne informacije

Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja.

  • Opća sigurnost: Keep the device away from children. Do not operate in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Store in a cool, dry place.
  • Jump Starting Safety:
    • Ensure correct polarity when connecting the clamps (red to positive, black to negative). Incorrect connection can cause sparks or damage.
    • Wear eye protection and gloves when jump starting.
    • Nemojte dopustiti crveni i crni clamps to touch each other, as this can cause a short circuit.
    • Ne pokušavajte pokrenuti zamrznutu bateriju.
    • Ensure the vehicle's ignition is off before connecting the jump starter.
  • Sigurnost zračnog kompresora:
    • Do not overinflate tires or other items. Always check the recommended pressure for the item being inflated.
    • Monitor the pressure gauge during inflation to avoid exceeding the maximum pressure.
    • The air hose may become hot during prolonged use. Handle with care.
  • Sigurnost baterije:
    • Do not disassemble, modify, or immerse the device in water.
    • Charge the device only with the provided USB-C cable.
    • Avoid exposing the device to extreme temperatures (below -20°C or above 45°C).
    • If the battery swells, leaks, or emits an odor, discontinue use immediately.

The ASMAX T20 incorporates 10 levels of safety protection, including spark-proof, reverse polarity, short circuit, overload, over-voltage, over-current, high/low temperature, overcharge, and reverse charge protection, ensuring safe operation.

Diagram illustrating 10 safety protection features of the ASMAX T20 jump starter, including spark-proof, reverse polarity, short circuit, and overcharge protection.

Image: The ASMAX T20 features 10 integrated safety protections for secure operation.

3. Sadržaj paketa

Provjerite jesu li svi artikli prisutni u paketu:

  • Arrancador con Compresor de Aire T20 (Jump Starter with Air Compressor T20)
  • Válvula Schrader Extendida (Extended Schrader Valve)
  • Aguja para Inflar Balones (Ball Inflation Needle)
  • Válvula Schrader (Schrader Valve)
  • Válvula Presta (Presta Valve)
  • Cable de Carga USB-C (USB-C Charging Cable)
  • Manguera de Aire Inflable (Inflatable Air Hose)
  • Cable de Puente de 12V con Pinzas (12V Jumper Cable with Clamps)
  • Bolsa de Almacenamiento (Storage Bag)
  • Manual de Usuario (User Manual)
Contents of the ASMAX T20 package, including the main unit, jumper cables, air hose, various nozzles, USB-C cable, and storage bag.

Image: All components included in the ASMAX T20 product box.

4. Proizvod je gotovview

The ASMAX T20 features a compact design with an intuitive interface. Familiarize yourself with the device's components and controls.

The ASMAX T20 multi-function device, showing its main unit, jumper cables, air hose, and various inflation nozzles.

Image: The ASMAX T20 device and its accessories.

4.1. Značajke glavne jedinice

  • Veliki LCD zaslon: Shows real-time tire pressure, battery level, and selected modes.
  • Close-up of the ASMAX T20's large LCD screen displaying digital readings for PSI, BAR, KPA, and Kg/cm², along with icons for different inflation modes.

    Image: The high-definition LCD screen provides clear information.

  • Kontrolni gumbi: Intuitive buttons for power, mode selection, and pressure adjustment.
  • Priključak za brzi početak: Connects to the 12V jumper cables.
  • Priključak za crijevo za zrak: Connects the inflatable air hose.
  • USB-A izlazni priključak: Za punjenje vanjskih uređaja (funkcija powerbanka).
  • The ASMAX T20 device being used as a power bank, charging a smartphone via its USB-A output port.

    Image: The ASMAX T20 functions as a 12000mAh power bank.

  • USB-C ulazni priključak: For charging the ASMAX T20 device.
  • LED bljeskalica: Integrated high-intensity LED light with multiple modes.
  • A person using the ASMAX T20's integrated LED flashlight to illuminate a car engine bay, showing its constant, intermittent, and SOS modes.

    Image: The device includes a powerful LED emergency light.

5. Specifikacije

ZnačajkaSpecifikacija
Maksimalna struja4000A
Raspon tlaka2-150 PSI / 0.1-10.3 BAR
Protok zraka28 L/min
Raspon radne temperature-20°C do 45°C (-4°F do 113°F)
Kapacitet baterije12000 mAh / 44.4 Wh
Ulazni voltage5V (USB-C)
Engine Support (Gasoline)Do 9.0l
Engine Support (Diesel)Do 8.0l
Vehicle Type CompatibilityAll 12V vehicles (motorcycles, cars, SUVs, ATVs, vans, trucks, lawnmowers)
Dimenzije5 x 7.1 x 9 cm
Težina700 ​​g
Detailed specifications table for the ASMAX T20, listing maximum current, pressure range, air flow, temperature range, battery capacity, input voltage, and engine support.

Image: Comprehensive specifications of the ASMAX T20.

6. Postavljanje

6.1. Početno punjenje

Before first use, fully charge the ASMAX T20. Connect the provided USB-C charging cable to the device's USB-C input port and a compatible 5V USB power adapter (not included). The LCD display will indicate the charging status. A full charge typically takes 3-4 hours.

7. Upute za rad

7.1. Pokretanje vozila pomoću kablova

The ASMAX T20 can jump start 12V gasoline vehicles up to 9.0L and diesel vehicles up to 8.0L.

  1. Pripremite vozilo: Provjerite je li kontakt vozila isključen i je li parkirna kočnica uključena.
  2. Connect the Booster: Insert the 12V jumper cable with clamps into the jump start port on the ASMAX T20.
  3. Step-by-step guide for jump starting a vehicle with the ASMAX T20. Shows connecting the booster, connecting clamps to the battery, waiting for the green light, and starting the engine.

    Image: Steps for instant vehicle restart using the ASMAX T20.

  4. Spojite na bateriju: Attach the red (positive, +) clamp to the positive terminal of the vehicle's battery. Attach the black (negative, -) clamp to the negative terminal of the vehicle's battery. Ensure a secure connection.
  5. Close-up of the ASMAX T20's jumper cables connected to a car battery, showing the red clamp on the positive terminal and the black clamp on the negative terminal.

    Image: Proper connection of jumper clamps na akumulator automobila.

  6. Pokreni vozilo: Once connected, the green light on the jumper cable connector will illuminate, indicating a ready state. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds per attempt.
  7. Prekini vezu: Nakon što se vozilo pokrene, odmah odspojite crni (negativni) polamp prvo, zatim crveni (pozitivni) clamp. Remove the jumper cable from the ASMAX T20.
The ASMAX T20 jump starter connected to a car battery under the hood, with the air compressor hose connected to a tire, demonstrating its dual functionality.

Image: The ASMAX T20 in use for both jump starting and tire inflation.

7.2. Korištenje zračnog kompresora

The 150 PSI air compressor can inflate tires, balls, and other inflatables quickly.

  1. Spojite mlaznicu: Select the appropriate nozzle for your item and securely attach it to the inflatable air hose. Connect the air hose to the air hose port on the ASMAX T20.
  2. Three steps for effortless inflation with the ASMAX T20: connect the appropriate nozzle, long press to select preset mode, and connect to the tire to inflate.

    Image: Steps for effortless inflation using the ASMAX T20.

  3. Select Mode & Set Pressure: Turn on the device. Long press the mode button to select from 5 preset modes (balls, bicycles, motorcycles, cars, custom). Use the '+' and '-' buttons to adjust the target pressure. The LCD screen will display the current and target pressure.
  4. Početak inflacije: Connect the nozzle to the item to be inflated. Press the power button to start inflation. The compressor will automatically stop once the preset pressure is reached.
  5. Prekini vezu: Disconnect the nozzle from the item and the air hose from the device.
A person relaxing by a lake while the ASMAX T20 air compressor inflates a car tire, highlighting its portability and convenience.

Image: The ASMAX T20 air compressor in use, inflating a tire quickly.

7.3. Korištenje kao power bank

The 12000mAh battery can charge mobile phones, tablets, and other USB-powered devices.

  1. Povežite uređaj: Connect your electronic device to the USB-A output port of the ASMAX T20 using a compatible USB cable.
  2. Punjenje: The ASMAX T20 will automatically begin charging your device. Monitor the charging status on your device's screen.

7.4. Korištenje LED svjetiljke

Integrirana LED svjetiljka pruža osvjetljenje za različite situacije.

  1. Uključivanje/isključivanje: Press the flashlight button to turn the light on or off.
  2. Promjena načina rada: Press the flashlight button repeatedly to cycle through the modes: Constant Illumination, Intermittent (Strobe) Mode, and SOS Warning Mode.

8. Održavanje

Proper maintenance ensures the longevity and optimal performance of your ASMAX T20.

  • Čišćenje: Wipe the device with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure all ports are free of dust and debris.
  • Skladištenje: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The ideal storage temperature range is between -20°C and 45°C.
  • Njega baterije: To maintain battery health, it is recommended to fully charge the device every 3-6 months, even if not in use. Do not store the device with a completely depleted battery.
  • Njega pribora: Keep the jumper cables, air hose, and nozzles clean and free from damage. Store them in the provided storage bag.

9. Rješavanje problema

If you encounter issues with your ASMAX T20, refer to the following common problems and solutions:

ProblemMogući uzrokOtopina
Uređaj se ne uključuje.Baterija je prazna.Potpuno napunite uređaj pomoću USB-C kabela.
Vozilo se ne pokreće pomoću kablova.Netočna klamp veza.
Device battery too low.
Vehicle battery completely dead (below 50% charge on device required).
Vehicle issue not related to battery.
Osigurajte clampsu ispravno spojeni (crveni na +, crni na -).
Ensure device is sufficiently charged (above 50%).
For completely dead batteries, ensure device is fully charged and try again. If still no start, consult a mechanic.
Check other vehicle systems.
Zračni kompresor se ne napuhuje.Crijevo nije sigurno spojeno.
Mlaznica nije pravilno pričvršćena.
Target pressure not set.
Device battery too low.
Ensure air hose is securely screwed into the device and nozzle.
Ensure nozzle is firmly attached to the item.
Set a target pressure on the display.
Napunite uređaj.
LCD zaslon ne radi.Uređaj je isključen ili je baterija prazna.Press the power button to turn on. Charge the device if necessary.
Device gets hot during use.Normal operation during high load (e.g., prolonged inflation or multiple jump starts).Allow the device to cool down before continued use. If overheating persists or is excessive, discontinue use and contact support.

If the problem persists after attempting these solutions, please contact ASMAX customer support for assistance.

10. Jamstvo i podrška

The ASMAX T20 is designed and manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official ASMAX website. For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact ASMAX customer service through the contact information provided on the product packaging or the official brand webmjesto.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.