1. Uvod
This manual provides essential information for the safe and effective operation of your ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine. Please read this manual thoroughly before operating the device to ensure proper usage and to prevent damage or injury. The ComMarker Titan1 is designed for high-precision engraving and marking on various materials, including metals, plastics, and jewelry, offering advanced features like color marking and 3D engraving capabilities.
2. Sigurnosne informacije
The ComMarker Titan1 is a Class 1 Laser Product (IEC 60825-1 Report Number: 2501Q25848E-SFA1, FDA Accession No.: 2521455-000). Despite being a Class 1 product, proper safety precautions are crucial during operation.
- Always wear appropriate laser safety goggles when operating the machine.
- Osigurajte da je radni prostor dobro prozračen kako bi se raspršili isparenja i čestice koje nastaju tijekom graviranja.
- Never look directly into the laser beam or at reflections from shiny surfaces.
- Držite zapaljive materijale dalje od područja graviranja.
- Do not operate the machine if any covers are removed or safety interlocks are bypassed.
- Provjerite je li stroj pravilno uzemljen.
- Upoznajte se s položajem i funkcijom tipke za zaustavljanje u nuždi.
3. Sadržaj paketa
Provjerite jesu li svi dolje navedeni artikli uključeni u vaš paket. Ako neki artikli nedostaju ili su oštećeni, obratite se korisničkoj podršci.
Slika: Prekoview of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine and its accessories.
- ComMarker Titan1 Laser Engraver Body
- Adapter napajanja
- Podatkovni kabel
- Prekidač stopala
- Laserske zaštitne naočale
- Set imbus ključeva
- USB Drive (containing software and drivers)
- Vladar
- Podna žica
- Placing Helper (material positioning aids)
- Sample Materials (Rings, Metal Pendants, Pendants)
4. Značajke proizvoda
- 60W JPT Mopa Laser Source: Provides high-speed engraving up to 15,000mm/s and supports color marking on stainless steel.
- Visoka točnost: Achieves 8K HD accuracy with a precision of 0.01mm.
- Veliko područje graviranja: Maximum engraving area of 300mm x 300mm.
- Motorized Elevation: Features electric lifting for precise height adjustment and focusing.
- Dual Focusing Modes: Supports both manual and electric focusing for optimal results.
- Kompatibilnost softvera: Compatible with Lightburn and EzCad2 software.
- Široka kompatibilnost materijala: Engraves stainless steel, aluminum, gold, silver, alloys, most painted products, and non-transparent plastics.
- 3D Engraving & Cutting: Capable of creating depth effects and performing cutting tasks on suitable materials.
- Dug vijek trajanja: Designed for durability with a laser source lifespan of 100,000 hours.
5. Vodič za postavljanje
- Raspakiranje: Pažljivo izvadite sve komponente iz ambalaže. Sačuvajte ambalažu za budući transport ili skladištenje.
- Skupština: Place the laser engraver body on a stable, level surface. Connect the laser head assembly to the main unit, ensuring all fasteners are secure.
- Priključak za napajanje: Connect the power adaptor to the machine and then to a grounded electrical outlet (110V).
- Uzemljenje: Attach the provided ground wire to the designated grounding point on the machine and to a suitable ground source.
- Podatkovna veza: Connect the data cable from the machine to your computer.
- Instalacija softvera: Insert the USB drive into your computer. Install the provided EzCad2 software and drivers. If using Lightburn, download and install the latest version from the official Lightburn webmjesto.
- Zaštitne naočale: Always put on the laser safety goggles before powering on the machine.
6. Upute za rad
- Uključivanje: Ensure all connections are secure and safety goggles are worn. Press the power button on the machine.
- Pokretanje softvera: Open EzCad2 or Lightburn software on your computer.
- Postavljanje materijala: Place the material to be engraved on the work platform. Use the placing helpers if needed to secure the material.
- Fokusiranje: Adjust the laser head height using the motorized elevation until the laser is properly focused on the material surface. You can use either manual or electric focusing. Refer to the software's focusing guide for precise adjustment.
- Design Import/Creation: Import your design (BMP, GIF, JPG, JPEG, DXF, DST, AI, etc.) or create a new one within the software.
- Postavke parametara: Set the appropriate laser parameters (power, speed, frequency, passes) based on the material type and desired engraving effect (e.g., color marking, deep engraving, cutting).
- prijeview (Red Light): Use the red light preview function in the software to verify the engraving area and position on your material.
- Početak graviranja: Once satisfied with the preview and parameters, initiate the engraving process from the software. You may use the foot switch for convenient start/stop control.
- Praćenje: Supervise the engraving process. In case of any issue, press the emergency stop button immediately.
- Isključivanje: After engraving is complete, power off the machine and disconnect it from the power source.
7. Održavanje
- Čišćenje leća: Regularly inspect and clean the laser lens with a specialized lens cleaning solution and lint-free wipes to ensure optimal laser performance.
- Radno područje: Keep the work platform and surrounding area clean from debris and dust.
- Ventilacija: Ensure the ventilation system is clear and functioning properly to prevent accumulation of fumes and particles.
- Pregled kabela: Periodically check all cables for signs of wear or damage. Replace any damaged cables immediately.
- Ažuriranja softvera: Keep your engraving software (Lightburn, EzCad2) updated to the latest version for best performance and compatibility.
8. Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Laser ne pali | Power not connected; Emergency stop engaged; Software error; Laser source issue. | Check power connections; Release emergency stop; Restart software/computer; Contact support if laser source is suspected. |
| Loša kvaliteta graviranja | Incorrect focus; Dirty lens; Incorrect power/speed settings; Material not flat. | Re-focus the laser; Clean the lens; Adjust engraving parameters; Ensure material is flat and secure. |
| Stroj se ne spaja na računalo | Loose data cable; Driver not installed; Software not recognizing device. | Check data cable connection; Install/reinstall drivers from USB drive; Restart software/computer. |
| Neočekivano gašenje stroja | Overheating; Power fluctuation; Loose power connection. | Ensure proper ventilation; Check power supply stability; Secure power cable. |
9. Specifikacije
Image: Detailed dimensions of the ComMarker Titan1 60W JPT Mopa Fiber Laser Engraving Machine.
| Značajka | Detalj |
|---|---|
| Proizvođač | ComMarker |
| Broj modela | Titan1 Mopa |
| Laserski izvor | 60W JPT Mopa Fiber Laser |
| Laserska valna duljina | 1064 nm |
| Brzina graviranja | Do 15,000mm/s |
| Točnost graviranja | 0.01mm, 8K HD |
| Maximum Engraving Area | 300 mm x 300 mm |
| Izvor napajanja | AC/DC, 110 V |
| Kompatibilnost sustava | Windows 7/8/10/11, MAC (Lightburn) |
| Supported Graphic Formats | BMP, GIF, JPG, JPEG, DXF, DST, AI, etc. |
| Dimenzije proizvoda | 22 x 25.8 x 21.5 inča (otprilike 559 x 655 x 546 mm) |
| Laserska klasa | Class 1 Laser Product (IEC 60825-1) |
10. Jamstvo i podrška
For warranty information, please refer to the documentation included with your purchase or contact ComMarker customer support directly. If you encounter any issues not covered in this manual or require technical assistance, please reach out to ComMarker customer service through their official webweb-mjestu ili kontaktnim podacima navedenima prilikom kupnje.
Mrežni resursi: For additional guides, software updates, and community support, visit the official ComMarker webmjesto.