Uvod
Thank you for choosing the Tornado 24 Inch Outdoor Wall Mount Fan. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your fan. Please read these instructions thoroughly before use and retain them for future reference.
This high-velocity, IPX4 water-resistant fan is designed for industrial and commercial use, delivering powerful airflow up to 7350 CFM. It features a durable construction with rust-resistant aluminum and powder-coated steel, a TEAO ball bearing motor, and cETL listing for safety.
Važne sigurnosne upute
- Always disconnect the fan from the power source before cleaning, servicing, or moving.
- Nemojte koristiti ventilator s oštećenim kabelom ili utikačem. Bacite ventilator ili ga vratite u ovlašteni servis na pregled i/ili popravak.
- Nemojte provlačiti kabel ispod tepiha. Nemojte pokrivati kabel prostirkama, stazama ili sličnim pokrivalima. Postavite kabel dalje od područja prometa i na mjesto gdje se neće spotaknuti.
- Kako biste se zaštitili od strujnog udara, nemojte uranjati jedinicu, utikač ili kabel u vodu niti ih prskati tekućinama.
- Neophodan je strogi nadzor kada bilo koji uređaj koriste djeca ili u blizini djece.
- This fan is equipped with a GFCI plug to meet U.S. outdoor electrical safety standards. Do not bypass or modify the GFCI plug.
- Ensure the fan is securely mounted to a stable surface before operation.
- Keep hands, hair, clothing, and other objects away from the fan blades during operation to prevent injury.
- Nemojte koristiti ovaj ventilator s bilo kojim poluprovodničkim uređajem za kontrolu brzine.
Sadržaj paketa
Prije početka instalacije provjerite jesu li sve komponente prisutne.
- Tornado 24 Inch Outdoor Wall Mount Fan Head
- Zidni nosač
- Power Cord with GFCI Plug (10 ft SJTW)
- Pribor za montažu (matice, vijci, podloške)
- Priručnik s uputama
Bilješka: Mounting bolts (three M8x80 expansion bolts) for concrete or metal surfaces are nije uključeno i mora se kupiti zasebno.
Postavljanje i instalacija
- Raspakirajte i pregledajte: Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping.
- Sastavljanje lopatica ventilatora: Attach the fan blades to the motor shaft. Ensure the set screw on the fan hub is positioned TOWARDS the motor for correct airflow direction. Incorrect blade installation will result in poor air movement.
- Pričvrstite rešetku: Secure the front and rear grilles around the fan blades. Ensure they are properly aligned and fastened to prevent accidental contact with moving parts.
-
Mjesto montaže: Choose a suitable mounting location on a concrete or metal surface. This fan is not recommended for wood wall installation. Consider the fan's dimensions (27.1"D x 18.8"W x 32"H) and ensure adequate clearance for oscillation and tilt.
Slika 1: Dimenzije ventilatora
- Install Wall Mount Bracket: Using three M8x80 expansion bolts (not included), securely fasten the wall mount bracket to your chosen concrete or metal surface. Ensure the bracket is level and capable of supporting the fan's weight (approximately 26.46 lbs). The bracket design positions the fan approximately 10 inches off the wall.
- Pričvrstite ventilator na nosač: Mount the assembled fan head onto the installed wall bracket, securing it with the provided hardware. Double-check all connections to ensure stability.
Upute za rad
The Tornado 24 Inch Outdoor Wall Mount Fan offers two speed settings, oscillation, and vertical tilt for optimal airflow control.
- Priključak za napajanje: Plug the fan's 10-foot SJTW power cord into a standard 120V AC outlet. The integrated GFCI plug provides enhanced safety for outdoor use.
-
Kontrola brzine: Use the pull chain switch located on the fan motor to cycle through the two speed settings:
- Pull 1: Low Speed (6450 CFM)
- Pull 2: High Speed (7350 CFM)
- Povucite 3: Isključeno
Figure 2: Fan Speed Settings
- Kontrola oscilacija: The fan features 75° side-to-side oscillation. To activate or deactivate oscillation, use the knob located on the top of the fan motor housing.
-
Podešavanje vertikalnog nagiba: The fan head can be manually tilted up to 25° vertically. Loosen the adjustment knob on the side of the fan, set the desired angle, and then tighten the knob to secure the position.
Figure 3: Oscillation and Tilt Features
Održavanje
Redovito održavanje osigurava optimalne performanse i produžuje vijek trajanja vašeg ventilatora.
- Čišćenje: Disconnect the fan from the power source before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces and grilles. Do not use abrasive cleaners or immerse the fan in water. For stubborn dirt, a mild soap solution can be used. Ensure the fan is completely dry before reconnecting to power.
- Motor: The TEAO (Totally Enclosed Air Over) ball bearing motor is designed for durability and requires minimal maintenance. Do not attempt to lubricate the motor.
- Skladištenje: If storing the fan for an extended period, clean it thoroughly and store it in a dry, cool place, protected from dust and moisture.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Ventilator se ne uključuje. | No power, GFCI tripped, damaged cord/plug. |
|
| Fan runs but moves very little air. | Fan blades installed backward. |
|
| Ventilator je pretjerano bučan. | Loose components, obstruction, normal operating noise. |
|
| Oscilacija ne radi. | Gumb za oscilaciju nije uključen. |
|
Tehnički podaci
| Naziv modela | HI-FAN-24MOWF-WR-1P-HEX2 |
| Duljina oštrice | 24 inča |
| Kapacitet protoka zraka | 7350 CFM (High), 6450 CFM (Low) |
| Broj brzina | 2 |
| Oscilacija | 75° Left-Right |
| Vertikalni nagib | 25° |
| Vrsta motora | TEAO Ball Bearing, Direct Drive |
| Izvor napajanja | AC (120 Volts, 60Hz) |
| Wattage | 200 vata |
| Ampdoba | 1.7A |
| RPM | 1100 okretaja u minuti |
| Razina buke | Maksimalno 69 dB |
| Materijal | Aluminum, Powder-Coated Steel |
| Vodootpornost | IPX4 certificirano |
| Certifikati | Na popisu cETL |
| Dimenzije proizvoda (D x Š x V) | 27.1 cm x 18.8 cm x 32 cm |
| Težina artikla | 26.46 funti |
| Duljina kabela | 10 ft SJTW |
Figure 4: IPX4 Water Resistance and Certifications
Informacije o jamstvu
This Tornado 24 Inch Outdoor Wall Mount Fan comes with a 1 godina ograničenog jamstva. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, or to make a warranty claim, please refer to the warranty documentation included with your purchase or contact customer support.
Korisnička podrška
For technical assistance, troubleshooting, or warranty inquiries, please contact Tornado customer support.
- Webstranica: Visit the official Tornado webstranica za često postavljana pitanja i resurse podrške.
- Email: Refer to your product packaging or warranty card for customer service email contact.
- Telefon: Broj telefona korisničke službe potražite na pakiranju proizvoda ili jamstvenom listu.
When contacting support, please have your model number (HI-FAN-24MOWF-WR-1P-HEX2) and purchase date available.