RGBlink NDI PTZ Camera Controller (RGBBKT) User Manual

1. Uvod

This manual provides detailed instructions for the setup, operation, maintenance, and troubleshooting of the RGBlink NDI PTZ Camera Controller (RGBBKT). This device is designed for professional video production environments, offering comprehensive control over various PTZ cameras using multiple protocols.

Image 1.1: RGBlink NDI PTZ Camera Controller (RGBBKT).

2. Postavljanje

Follow these steps to set up your RGBlink NDI PTZ Camera Controller.

2.1 Raspakiranje i početni pregled

• Pažljivo izvadite sve komponente iz pakiranja.
• Provjerite jesu li prisutni svi predmeti navedeni na popisu za pakiranje.
• Inspect the controller for any signs of physical damage. If damage is found, contact your dealer immediately.

2.2 Spajanje kontrolera

The RGBlink NDI PTZ Camera Controller supports various connection methods for power and camera control.

• Napajanje preko Etherneta (PoE): Connect a single RJ45 Ethernet cable from a PoE-enabled network switch to the controller's LAN port. This provides both power and network connectivity.
• Vanjski adapter za napajanje: If PoE is not available, connect the provided power adapter to the DC 12V input port and to a power outlet.
• Priključci kamere:
  • Ethernet (IP Control): Connect PTZ cameras to the same network as the controller via RJ45 Ethernet cables. The controller supports VISCA over IP, ONVIF v2.42, and NDI v5.5 protocols.
  • Serial Control: For cameras supporting serial communication, use RS232, RS422, or RS485 interfaces. Connect the appropriate cables from the controller's serial ports to the cameras.

Image 2.1: Rear panel connections including RS-232, RS-422, LAN (PoE), and Power Input.

Slika 2.2: Primjerample connection diagram showing PTZ Controller, PoE Switch, PTZ Cameras, Audio Mixer, and Computer.

Image 2.3: Diagram illustrating IP camera connections via a network switch.

2.3 Konfiguracija mreže

For IP-based camera control, ensure the controller and cameras are on the same network segment. The controller supports automatic detection of NDI-enabled PTZ cameras.

• Pristupite kontroleru web sučelja unosom njegove IP adrese u a web browser. (Refer to the device's display or network tools to find the IP address).
• The default login credentials are typically 'admin' with a blank password. It is recommended to set a strong password immediately.
• Unutar web interface, configure camera protocols (e.g., ONVIF, VISCA over IP) and enter camera-specific user credentials if required.

Image 2.4: NDI|HX camera search and control interface on the controller.

3. Operacija

This section details the operational functions of the RGBlink NDI PTZ Camera Controller.

3.1 Krajview kontrole

The controller features a 3.49" LCD display, a 3D joystick, various knobs, and a numeric keypad for intuitive control.

Image 3.1: The controller's 3.49-inch LCD display.

Slika 3.2: Detaljno view of the 3D joystick and multi-function knobs.

Image 3.3: Layout of the controller's buttons and numeric keypad area.

3.2 Odabir kamere

• Gumbi za brzi odabir: Use the dedicated CAM 1-5 buttons for quick selection of up to 5 cameras.
• Numerička tipkovnica: For cameras beyond the quick select buttons (up to 255), press the ID CAM-a button, then enter the camera number using the numeric keypad, and press ENTER.

Image 3.4: The controller's ability to manage multiple cameras.

3.3 PTZ kontrola

• joystick: The 3D joystick controls pan (left/right), tilt (up/down), and zoom (rotate the joystick).
• PT gumb za brzinu: Adjusts the gimbal movement speed for pan and tilt.
• Gumb za zumiranje: Provides precise zoom control, especially useful in preview način rada.

3.4 Image Parameter Adjustment

• IRIS/SHUTTER Knob: Rotate to adjust aperture and shutter speed. Press to switch control modes.
• R/B GAIN Knob: Rotate to adjust red and blue gain. Press to switch control modes.
• FOCUS Button: Pritisnite tipku AUTO FOKUS button to switch the camera to auto focus mode.
• EXPOSURE Button: Cycles through exposure modes (Aperture Priority, Shutter Priority, Gain Priority, Manual Exposure, Auto Exposure).
• BACKLIGHT Button: Toggles the camera's backlight mode.
• WHITE BALANCE CYCLE Button: Cycles through white balance modes (Indoor, Outdoor, Manual, Auto).
• ONE PUSH TRIGGER Button: When white balance is set to "One-Push White Balance", press this button to initiate a one-push white balance calibration.

Image 3.5: Functions of buttons and knobs on the left side of the controller.

Image 3.6: Functions of buttons and knobs on the right side of the controller, including preset controls.

3.5 unaprijed postavljenih postavki

• SET PRESET Button: Press to enter preset position mode. Use the numeric keys to enter the preset number (0-9) and press ENTER spremiti. Pritisnite ESC izaći.
• CALL PRESET Button: Press to enter preset recall mode. Use the numeric keys to enter the preset number (0-9) and press ENTER to recall. Press ESC izaći.
• The controller supports saving and recalling up to 255 presets per camera.

3.6 Navigacija izbornikom

• Gumb IZBORNIK: Press to open or close the camera settings menu. In menu control mode, the joystick controls navigation (up, down, left, right), ENTER confirms selections, and ESC acts as a back button.

4. Održavanje

Proper maintenance ensures the longevity and optimal performance of your RGBlink NDI PTZ Camera Controller.

4.1 Čišćenje

• Use a soft, dry cloth to clean the exterior of the controller.
• Za tvrdokornu prljavštinu, lagano dampobrišite krpu vodom ili blagom, neabrazivnom otopinom za čišćenje.
• Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the surface and display.
• Ensure no liquids enter the device through openings or ports.

4.2 Skladištenje

• Kada se kontroler ne koristi dulje vrijeme, čuvajte ga na hladnom i suhom mjestu, dalje od izravne sunčeve svjetlosti i ekstremnih temperatura.
• Zaštitite uređaj od prašine i vlage.

5. Rješavanje problema

Ovaj odjeljak nudi rješenja za uobičajene probleme s kojima se možete susresti.

5.1 Bez napajanja

• Provjerite izvor napajanja: Provjerite je li adapter za napajanje sigurno spojen i na kontroler i na ispravnu utičnicu.
• PoE Check: If using PoE, verify that the Ethernet cable is connected to a PoE-enabled port on your network switch and that the switch is powered on.
• Integritet kabela: Inspect the power cable and Ethernet cable for any damage.

5.2 Cannot Control Camera

• Mrežna povezanost: For IP cameras, ensure the controller and cameras are on the same network and can communicate. Check network cables and IP addresses.
• Neusklađenost protokola: Verify that the correct control protocol (e.g., VISCA over IP, ONVIF, NDI, Pelco-D/P) is selected on both the controller and the camera.
• ID kamere: Ensure the correct camera ID is selected on the controller.
• Vjerodajnice za prijavu: If the camera requires authentication, confirm that the correct username and password are configured in the controller's web sučelje.
• Serijska veza: For serial control, check RS232/RS422/RS485 cable connections and ensure baud rates and addresses match between the controller and camera.
• Firmware: Ensure both the controller and cameras have the latest firmware installed. Visit the RGBlink support webstranica za ažuriranja.

5.3 LCD Display Issues

• Nema zaslona: Provjerite je li kontroler uključen.
• Zatamnjeni zaslon: Check if there are any brightness settings on the controller that can be adjusted.

6. Specifikacije

Image 6.1: Controller dimensions and typical usage environments.

Image 6.2: Visual representation of supported protocols including RJ45, RS485, RS422, RS232, ONVIF, NDI, Pelco-D, Pelco-P, and Visca.

7. Video demonstracija proizvoda

Watch the official product video for a visual demonstration of the RGBlink NDI PTZ Camera Controller's features and operation.

8. Jamstvo i podrška

For warranty information, technical support, or service inquiries, please contact RGBlink customer service or visit their official webmjesto.

• Proizvođač: Xiamen RGBlink Science & Technology Co.,Ltd.
• Službenik Webstranica: www.rgblink.com (Napomena: Ovo je rezervirano mjesto URL, please refer to your product packaging or official documentation for the correct support webmjesto.)
• Podaci za kontakt: Refer to the RGBlink official website for the most current contact details for technical support and warranty claims.