Upute za uporabu senzora kadence bicikla COROS

Uvod

The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.

Što je u kutiji

Nakon otvaranja paketa pronaći ćete sljedeće komponente:

• COROS Bike Cadence Sensor
• Nosač senzora
• Rubber Bands for mounting
• Kratki vodič za početak
• Informacije o sigurnosti proizvoda

Postavljanje i instalacija

1. Ugradnja baterije

The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.

2. Montiranje senzora

The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.

3. Uparivanje s uređajima

The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.

Upute za rad

Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.

Održavanje

Trajanje baterije i zamjena

The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.

Čišćenje i otpornost na vodu

The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp krpom. Izbjegavajte korištenje jakih kemikalija ili abrazivnih materijala koji bi mogli oštetiti uređaj.

Rješavanje problema

• Senzor se ne spaja: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
• Netočna očitanja: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
• Brzo pražnjenje baterije: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.

Tehnički podaci

Jamstvo i podrška

The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webweb-mjesto ili se izravno obratite njihovoj korisničkoj službi. Sačuvajte dokaz o kupnji radi potvrde jamstva.