ECONTROLLY Replacement Remote Control User Manual

Uvod

This manual provides instructions for the ECONTROLLY Replacement Remote Control, designed for use with various smart home theater projectors. Please read this manual carefully before using your remote control to ensure proper operation and to maximize its lifespan.

Kompatibilni modeli projektora:

• Yaber V12 / U12
• DBPOWER G01
• VOPLLS M10
• WiMiUS K9
• TOPTRO X9
• Wanbo TT
• MECOOL KP2
• Blitzwolf BW-V6

Postavljanje

1. Ugradnja baterije

The remote control requires AAA ALKALINE batteries for operation. Rechargeable batteries are not supported.

1. Pronađite poklopac pretinca za baterije na stražnjoj strani daljinskog upravljača.
2. Otvorite poklopac u smjeru strelice.
3. Insert two (2) AAA ALKALINE batteries, ensuring the positive (+) and negative (-) terminals match the markings inside the compartment.
4. Čvrsto zatvorite poklopac odjeljka za baterije.

Napomena: Baterije nisu uključene u paket daljinskog upravljača.

2. Pairing with Your Projector

This remote control requires pairing with your projector before its first use. Follow these steps to establish a connection:

1. Ensure your projector is powered on and within range of the remote control.
2. Simultaneously press and hold the "OK" button and the "Vol-" (Volume Down) button on the remote control.
3. Continue holding both buttons for approximately 3 to 10 seconds.
4. Release the buttons once the pairing indicator (if available on your projector or remote) confirms a successful connection, or when the remote begins to control the projector.

If pairing fails, ensure batteries are correctly installed and try again. Refer to your projector's manual for specific pairing instructions if issues persist.

Slika: prednja strana view of the ECONTROLLY Replacement Remote Control, showing all buttons including OK and Volume Down for pairing.

Rukovanje daljinskim upravljačem

The remote control features a standard layout for easy navigation and control of your smart projector. Below is a general overview uobičajene funkcije tipki:

Slika: Kutna view of the remote control, highlighting the button layout for operation.

• Gumb za napajanje (crveni): Turns the projector on or off.
• Gumb za isključivanje zvuka: Isključuje ili uključuje zvuk audio izlaza.
• Navigacijska tipka (gore, dolje, lijevo, desno): Navigates through menus and selections.
• Gumb OK: Potvrđuje odabire ili ulazi u izbornike.
• Gumb Natrag: Povratak na prethodni zaslon ili izbornik.
• Gumb Početna: Returns to the projector's main home screen.
• Volume Up (+) / Volume Down (-): Podešava glasnoću zvuka.
• F+ / F- Buttons: May control focus or other projector-specific functions. Refer to your projector's manual.
• Brojčana pločica (0-9): For direct input of channels or other numerical data.
• USB tipka: Likely switches input to a USB source.
• Dedicated App Buttons (NETF, prim video, YouT b, OPEN BROWSER): Provides quick access to popular streaming services and the web preglednik.

Specific button functionalities may vary slightly depending on your projector model. Consult your projector's user manual for detailed information.

Održavanje

Kako biste osigurali dugotrajnost i optimalne performanse daljinskog upravljača, slijedite ove smjernice za održavanje:

• Čišćenje: Use a soft, dry cloth to wipe the surface of the remote control. Do not use liquid cleaners, aerosols, or abrasive materials, as these can damage the remote.
• Zamjena baterije: Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA ALKALINE batteries.
• Skladištenje: Store the remote control in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity. If the remote will not be used for an extended period, remove the batteries to prevent leakage.
• Izbjegavajte kapi: Protect the remote from physical impact. Dropping the remote can damage internal components.

Rješavanje problema

If you encounter issues with your ECONTROLLY Replacement Remote Control, try the following troubleshooting steps:

• Daljinski ne reagira:
  • Check if the batteries are correctly installed with the correct polarity (+/-).
  • Replace old batteries with new AAA ALKALINE batteries.
  • Ensure there are no obstructions between the remote control and the projector's infrared receiver.
  • Confirm the remote is pointed directly at the projector's receiver.
• Problemi s uparivanjem:
  • Repeat the pairing process (hold "OK" and "Vol-" for 3-10 seconds).
  • Ensure the projector is powered on and ready for pairing.
  • Move closer to the projector during the pairing process.
  • Consult your specific projector's manual for its unique pairing requirements.
• Ograničena funkcionalnost:
  • Some advanced functions or specific buttons might require specific projector firmware or settings. Refer to your projector's manual.
  • Ensure the remote is fully paired and recognized by the projector.

Ako problemi potraju i nakon što ste isprobali ove korake, obratite se korisničkoj podršci.

Tehnički podaci

Slika: prednja strana view of the remote control displaying its dimensions: 6.7 inches in length and 1.75 inches in width.

Jamstvo i podrška

Informacije o jamstvu

This ECONTROLLY remote control comes with a Jamstvo 12 mjeseci from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or battery leakage.

Korisnička podrška

For technical assistance, troubleshooting, or warranty claims, please contact your retailer or the manufacturer, Shengxingwang Factory. Please have your product model (B0FPQ2WS3C) and purchase information ready when contacting support.

Manufacturer: Shengxingwang Factory