Cecotec Bolero Flux TLT 604400 Teleskopska napa - upute za uporabu

1. Proizvod je gotovview

The Cecotec Bolero Flux TLT 604400 is a 60cm telescopic extractor hood designed for efficient kitchen ventilation. It features a sleek black glass front and a stainless steel body, combining modern aesthetics with durability. This model boasts an A+++ energy rating and a powerful DC motor, ensuring high performance with low energy consumption.

Key features include a suction capacity of 431.2 m³/h, an invisible touch control panel, and innovative Hand Movement Control for adjusting settings without direct contact. It offers 3 speed levels plus a Booster function for intensive extraction, and integrated LED lighting for optimal illumination of your cooking area. The hood is equipped with 5-layer washable aluminum filters and includes carbon filters for recirculation mode.

Slika 1.1: Ispred view of the Cecotec Bolero Flux TLT 604400 Extractor Hood, highlighting its sleek design and control panel.

Slika 1.2: The 60cm design of the extractor hood, emphasizing its elegant black glass and stainless steel construction.

2. Sigurnosne informacije

Prije instalacije i upotrebe pažljivo pročitajte sve sigurnosne upute. Sačuvajte ovaj priručnik za buduću upotrebu.

• Električna sigurnost: Osigurajte da napajanje odgovara voltage specified on the rating plate. The appliance must be properly grounded. Do not pull the power cord to disconnect from the mains.
• Montaža: Installation must be performed by a qualified technician in accordance with local regulations. Maintain the minimum distance between the hob and the lower part of the hood as specified in the installation guide.
• Ventilacija: Osigurajte odgovarajuću ventilaciju u prostoriji kada se napa koristi istovremeno s plinskim ili drugim uređajima na gorivo.
• Čišćenje: Regularly clean the hood and filters to prevent grease accumulation, which can pose a fire hazard. Do not flambé under the hood.
• Djeca i ranjive osobe: Ovaj uređaj smiju koristiti djeca starija od 8 godina i osobe sa smanjenim fizičkim, osjetilnim ili mentalnim sposobnostima ili s nedostatkom iskustva i znanja ako su pod nadzorom ili su ih dobili upute u vezi s korištenjem uređaja na siguran način i razumiju opasnosti koje su uključene. . Djeca se ne smiju igrati s uređajem. Čišćenje i korisničko održavanje ne smiju obavljati djeca bez nadzora.
• Održavanje: Do not attempt to repair or modify the appliance yourself. Contact authorized service personnel for any repairs.

3. Uključene komponente

Prilikom raspakiranja provjerite jesu li sve komponente prisutne i neoštećene:

• 1 x Cecotec Bolero Flux TLT 604400 Telescopic Extractor Hood
• 1 x Korisnički priručnik (ovaj dokument)
• 2 x Carbon Filters (not pre-installed, for recirculation mode)
• Installation hardware (screws, wall plugs, etc. - specific items may vary)

4. Postavljanje i instalacija

Proper installation is crucial for the safe and efficient operation of your extractor hood. It can be installed in either extraction mode (ducting air outside) or recirculation mode (filtering air and returning it to the kitchen).

4.1. Provjere prije instalacije

• Ensure the installation area has sufficient space and structural support.
• Verify the electrical supply is compatible with the hood's requirements (220 Volts).
• If using extraction mode, ensure a suitable ducting route to the outside.
• If using recirculation mode, ensure the carbon filters are installed (see Maintenance section).

4.2. Montiranje nape

1. Measure and mark the drilling points on the wall or cabinet according to the provided template in the full installation guide.
2. Izbušite rupe i umetnite tiple.
3. Secure the mounting bracket or hood to the wall/cabinet using the appropriate screws.
4. Connect the ducting (if in extraction mode) or ensure the recirculation outlet is clear.
5. Connect the hood to the electrical supply.

Slika 4.1: Dimensional diagram of the extractor hood, crucial for accurate installation planning.

5. Operacija

Your Cecotec Bolero Flux TLT 604400 extractor hood offers intuitive control options for a seamless cooking experience.

5.1. Control Panel (Invisible Touch Control)

The hood features an invisible touch control panel that becomes visible when the hood is active. When off, it blends seamlessly with the black glass front.

Slika 5.1: The invisible touch control panel, showing power, speed, and light controls.

• Gumb za napajanje: Press to turn the hood on/off.
• Odabir brzine: Cycle through 3 extraction speeds (Low, Medium, High) to suit your cooking needs.
• Funkcija pojačanja: Activate for maximum extraction power during intense cooking. This function typically runs for a set period before returning to the previous speed.
• Gumb za svjetlo: Turn the integrated LED lighting on/off.

5.2. Hand Movement Control

For enhanced hygiene and convenience, the hood can be operated using hand gestures.

Slika 5.2: Demonstrating the Hand Movement Control feature for adjusting extraction speed.

• Povećaj brzinu: Wave your hand from left to right in front of the sensor.
• Smanji brzinu: Wave your hand from right to left in front of the sensor.
• Refer to the full manual for precise sensor location and gesture recognition.

5.3. Extraction Performance and Lighting

Slika 5.3: Visual representation of the hood's powerful 431.2 m³/h suction, ensuring a smoke-free kitchen.

Slika 5.4: The integrated LED lighting provides clear and energy-efficient illumination for your cooking zone.

6. Održavanje

Regular cleaning and maintenance will ensure optimal performance and extend the lifespan of your extractor hood.

6.1. Čišćenje aluminijskih filtera za masnoću

The 5-layer aluminum grease filters should be cleaned regularly (approximately every 2-4 weeks, depending on usage) to prevent grease buildup and maintain suction efficiency.

Slika 6.1: Illustration of the 5-layer aluminum filter, designed to capture grease effectively.

1. Turn off and unplug the hood from the power supply.
2. Open the hood panel and release the filter latches. Carefully remove the aluminum filters.
3. The filters are dishwasher-safe. Alternatively, wash them by hand using hot water and a mild detergent. Ensure they are completely dry before re-installing.
4. Ponovno postavite filtere, pazeći da su sigurno pričvršćeni.

6.2. Replacing Carbon Filters (Recirculation Mode)

If your hood is operating in recirculation mode, the carbon filters absorb odors and should be replaced every 3-6 months, depending on usage.

Slika 6.2: Carbon filters, essential for improving air quality in recirculation mode.

1. Turn off and unplug the hood from the power supply.
2. Uklonite aluminijske filtere za masnoću kako je gore opisano.
3. Locate the carbon filters (usually attached to the motor housing). Remove the old carbon filters by twisting or unlatching them.
4. Install new carbon filters, ensuring they are securely in place.
5. Ponovno postavite aluminijske filtere za masnoću.

6.3. Vanjsko čišćenje

Clean the exterior surfaces of the hood with a soft cloth and a mild, non-abrasive cleaner. Avoid harsh chemicals or abrasive pads that could damage the stainless steel or glass finish.

7. Rješavanje problema

Prije kontaktiranja korisničke podrške, pogledajte sljedeće uobičajene probleme i rješenja:

8. Specifikacije

Detailed technical specifications for the Cecotec Bolero Flux TLT 604400 Extractor Hood:

9. Jamstvo i podrška

Cecotec is committed to providing high-quality products and customer satisfaction.

9.1. Spare Parts Availability

Spare parts for this appliance are guaranteed to be available for a duration of 10 godine unutar EU, osiguravajući dugoročnu upotrebljivost i mogućnost popravka.

9.2. Korisnička podrška

For technical assistance, warranty claims, or to purchase spare parts, please contact Cecotec customer service through their official website or the contact information provided with your purchase documentation. When contacting support, please have your model number (TLT 604400 or A01_EU01_110282) and purchase date ready.