Uvod
Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.
Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.
Važne sigurnosne informacije
- Opasnost od električnog udara: Always disconnect power before installing or replacing the bulb.
- Unutarnja/vanjska upotreba: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
- Voltage: Osigurajte učvršćenje voltage is 120V. Do not use with incompatible voltage.
- Zatamnjenje: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
- Temperatura: Do not operate outside the specified temperature range of -20°C to +45°C.
- Rukovanje: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
- Odlaganje: LED žarulje odložite u skladu s lokalnim propisima.
Postavljanje i instalacija
- Isključivanje: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
- Uklonite staru žarulju: Pažljivo odvrnite postojeću žarulju iz grla.
- Umetnite novu žarulju: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
- Uključivanje: Vratite napajanje na uređaj.
- Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.
Operacija
The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.
- Kontrola svjetline: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
- Kvaliteta svjetla: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
- Širina širine: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.
Održavanje
The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.
- Čišćenje: Za čišćenje žarulje, provjerite je li napajanje isključeno i žarulja hladna. Nježno obrišite mekom, suhom krpom. Nemojte koristiti tekuća sredstva za čišćenje ili abrazivne materijale.
- Zamjena: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.
Rješavanje problema
Ako naiđete na probleme sa svojom Satco S12535 LED žaruljom, pogledajte sljedeće uobičajene korake za rješavanje problema:
- Žarulja ne svijetli:
- Provjerite je li napajanje uređaja uključeno.
- Provjerite je li žarulja sigurno pričvršćena.
- Testirajte žarulju u drugoj ispravnoj svjetiljci kako biste potvrdili da nije neispravna.
- Verify the fixture itself is operational.
- Treperenje ili nekonzistentno svjetlo:
- If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
- Check for loose connections in the fixture or bulb socket.
- Osigurajte voltage supply is stable at 120V.
- Bulb is Too Dim or Too Bright:
- If using a dimmer, adjust the dimmer setting.
- Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Broj modela | S12535 |
| Wattage | 5 W (ekvivalent žarulji sa žarnom niti 40 W) |
| Svjetlina | 425 lumena |
| Temperatura boje | 5000K (prirodno bijela) |
| Oblik žarulje | ST19 |
| Vrsta baze | E26 Srednja baza |
| Indeks reprodukcije boja (CRI) | 92 |
| Kut snopa | 300 stupnja |
| Voltage | 120 V |
| Mogućnost prigušivanja | Yes (with compatible 120V dimmers) |
| Ocijenjeni život | 15,000 sata |
| Ekološka ocjena | Wet Location Rated (IP65), Enclosed Fixture Rated |
| Radna temperatura | -20°C do +45°C |
| Certifikati | cULus, FCC, RoHS |
| Faktor snage | 0.7 |
| Frekvencija | 60 Hz |
| Težina artikla (pakiranje od 6 komada) | 1.06 funti |
Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).
Jamstvo i podrška
The Satco S12535 ST19 LED Light Bulb is backed by a 2-godišnje jamstvo proizvođača od datuma kupnje.
For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webstranicu za ažurne kontaktne informacije.
Webstranica: www.satco.com