KGUSS HP70

AUDALYTIC HP70 Fully Balanced Discrete Headphone AmpKorisnički priručnik za lifier

Model: HP70

1. Uvod

Thank you for choosing the AUDALYTIC HP70 Fully Balanced Discrete Headphone Amplifier. This manual provides essential information for setting up, operating, and maintaining your device to ensure optimal performance and longevity. Please read it thoroughly before use.

AUDALYTIC HP70 Headphone Ampprednji dio spasilačkog vozila view

The AUDALYTIC HP70 headphone amplifier, shown from the front, featuring its display, volume knob, and headphone outputs.

2. Sadržaj paketa

Molimo provjerite paket za sljedeće stavke:

  • AUDALYTIC HP70 Main Unit
  • Kabel za napajanje
  • Daljinski upravljač
  • Jamstveni list
Diagram of AUDALYTIC HP70 package contents including main unit, power cable, remote control, and warranty card.

Diagram illustrating the items included in the AUDALYTIC HP70 package.

3. Proizvod je gotovview

3.1 Prednja ploča

The front panel provides access to essential controls and headphone outputs.

Diagram of AUDALYTIC HP70 front panel with labeled controls.

Labeled diagram of the AUDALYTIC HP70 front panel.

  1. Gumb za napajanje: Short press to mute/unmute; press and hold to switch between standby and on.
  2. Zaslon zaslona: Shows volume level and function menus.
  3. Gumb za glasnoću: Rotate to adjust volume; short press to switch input source; press and hold to enter the menu.
  4. Priključak za slušalice: 4.4mm balanced output.
  5. Priključak za slušalice: 6.35mm single-ended output.

3.2 Stražnja ploča

The rear panel features various input and output connections for audio sources and power.

Diagram of AUDALYTIC HP70 rear panel with labeled input and output connections.

Labeled diagram of the AUDALYTIC HP70 rear panel connections.

  • XLR Balanced Inputs (Left/Right): For balanced audio sources.
  • RCA Single-Ended Inputs (L1/R1, L2/R2): Two sets for single-ended audio sources.
  • RCA Single-Ended Outputs (L Out/R Out): Za spajanje s drugom audio opremom.
  • XLR Balanced Outputs (Left/Right): For balanced output to other audio equipment.
  • DC Input 15-18V: Za vanjsko napajanje.
  • Ulazna snaga: Standard AC power input. Switching power supply requires no manual voltage odabir.
  • Osigurač: Osigurač za zaštitu.

4. Postavljanje

  1. Priključak za napajanje: Connect the provided power cable to the HP70's power input and then to a suitable AC power outlet. Alternatively, connect an external 15-18V DC power supply to the DC input.
  2. Veza izvora zvuka: Connect your audio source (e.g., DAC, CD player) to the desired input on the rear panel using appropriate RCA (single-ended) or XLR (balanced) cables.
  3. Priključak za slušalice: Plug your headphones into either the 4.4mm balanced output or the 6.35mm single-ended output on the front panel.
  4. prijeamp Output (Optional): If using the HP70 as a preamplifier, connect the RCA or XLR outputs to your power amplifier ili aktivni zvučnici.
  5. Uključivanje: Press and hold the power button on the front panel to turn on the device.

5. Operacija

5.1 Postavke izbornika

The HP70 features a menu system for configuring various settings. Use the volume knob to navigate and select options.

Flowchart illustrating the AUDALYTIC HP70 menu navigation and settings.

Menu navigation flowchart for the AUDALYTIC HP70.

  • Menu Graph: Press and hold the knob to enter the main menu.
  • Short press to move to the next line.
  • Rotate the knob to select.

Available settings include:

  • AMP DOBITAK: Continuously adjustable from 0 to +28dB.
  • PRETHODNI IZLAZ: Toggle preamplifier output ON or OFF.
  • AMP VLAST: Prebacivanje ampUKLJUČIVANJE ili ISKLJUČIVANJE napajanja lifiera.
  • SCREEN AUTO OFF: Toggle screen auto-off ON or OFF.
  • IZLAZ: Izađite iz izbornika.

5.2 Daljinski upravljač

The included remote control provides convenient access to the HP70's functions.

Diagram of AUDALYTIC HP70 remote control with labeled buttons.

Labeled diagram of the AUDALYTIC HP70 remote control.

  1. Gumb mirovanja: In standby mode, press to wake up the HP70 and activate the display. During normal operation, press to put the HP70 into standby mode.
  2. Gumb za odabir ulaza: Press to cycle through the available input sources on the HP70.
  3. Četverosmjerni navigacijski gumb: When the settings menu is open: Use the Up/Down buttons to navigate through menu options. Use the Left/Right buttons to adjust the selected setting. Press the OK button to confirm certain selections.
  4. Gumb izbornika: Pritisnite za ulazak u glavni izbornik. Ponovno pritisnite za izlazak iz izbornika i povratak na početni zaslon.
  5. Gumb Natrag: Povratak na početni zaslon iz bilo kojeg izbornika ili podmenija.
  6. Gumb za smanjivanje glasnoće: Decreases the output volume when the HP70 is on the home screen.
  7. Gumb za pojačavanje zvuka: Increases the output volume when the HP70 is on the home screen.
  8. Gumb za isključivanje zvuka: Toggles audio muting on and off.

Važne napomene:

  • Radni domet može varirati ovisno o kutu korištenja.
  • Prepreke između daljinskog upravljača i senzora mogu spriječiti pravilan rad.
  • Izvadite baterije ako daljinski upravljač nećete koristiti dulje vrijeme (mjesec dana ili dulje).
  • Ako dođe do curenja baterija, temeljito očistite odjeljak za baterije i umetnite nove baterije.
  • Ovaj daljinski upravljač može slučajno upravljati drugim uređajima s infracrvenim upravljanjem kada se koristi u blizini.

6. Ključne značajke

The AUDALYTIC HP70 is engineered with advanced features for superior audio performance:

Nadview of AUDALYTIC HP70 key features including balanced discrete Class A amplifier, dual op-amp, preamp function, power supply, volume control, and inputs/outputs.

Visual summary of the AUDALYTIC HP70's main features.

  • Fully Balanced Discrete Class A Ampdizalica: Utilizes 4 pairs of power transistors for ample driving power and superior control. This discrete design allows for precise fine-tuning and offers enhanced development potential, delivering a wider range of sonic characteristics. The post-amposlobođenje stage can be disabled, allowing the unit to function as a dedicated pure preampsredstvo za podsticanje.
  • Pure Preamp Funkcionalnost: Predamp uses two socketed LME49720 dual op-amps. Preamp output can be disabled for seamless switching between headphone and speaker modes.
  • Fully Balanced Input Stage: A single-ended to balanced conversion circuit ensures RCA inputs benefit from full balanced drive performance.
  • Built-in Low-Noise Power Supply: Features a 30VA low-noise power supply and also accepts an external 15-18V DC power input for flexibility.
  • Multi-stage Voltage Uredba: Designed with multiple independent voltage regulation circuits to minimize ripple noise and reduce interference, resulting in cleaner audio reproduction.
  • R-2R Relay Volume Control: Provides lossless precision adjustment with guaranteed channel matching across all 4 paths. Adjustable gain from 0 to 28dB allows matching with various headphones.
Detaljan view of the AUDALYTIC HP70's internal amplifier i preamp komponente.

Krupni plan view od amplifier i preamp sections, highlighting the discrete components and LME49720 op-amps.

Interni view of AUDALYTIC HP70 showing input stage, power supply, voltage regulation, and R-2R volume control.

Internal components illustrating the input stage, power supply, multi-stage svtage regulation, and R-2R relay volume control.

7. Specifikacije

Detailed technical specifications for the AUDALYTIC HP70:

Table of AUDALYTIC HP70 product specifications including analog inputs, headphone output, and other parameters.

Table summarizing the technical specifications of the AUDALYTIC HP70.

Specifikacije proizvoda
KategorijaSpecifikacija
Analogni ulazi
RCA Inputs (2 sets)Typical Input Sensitivity: 2 Vrms, Maximum Input Level: 3 Vrms, Input Impedance: 20 kΩ
XLR Balanced Input (1 set)Typical Input Sensitivity: +15 dBu (5 V), Maximum Input Level: +18 dBu (6 V), Input Impedance: 10 kΩ
prijeamp Analog Output (Rear XLR)Frequency Response: 20-40 kHz (±0.1 dB), Signal-to-Noise Ratio (SNR): 122 dB, Channel Crosstalk: < -120 dB @ 1 kHz, THD+N: < 0.0004%, IMD: < 0.0004%
Izlaz za slušalice
6.35mm Single-Ended OutputIzlazna impedancija: 0.1 Ω
4.4mm TRS Balanced OutputOutput Impedance: 0.2 Ω, Frequency Response: 20-40 kHz (±0.1 dB), Signal-to-Noise Ratio (SNR): > 120 dB, Channel Crosstalk: -118 dB @ 1 kHz, THD+N (1 kHz): < 0.0005% @ 1000 mW into 32 Ω, IMD: < 0.0005% @ 1000 mW into 32 Ω, Maximum Unclipped Output Power (Balanced): ≈ 2000 mW into 32 Ω
Ostali parametri
NapajanjeAC 115V / 230V, 50 / 60 Hz
Potrošnja energije< 15 W
Dimenzije (Š x V x D)220 x 50 x 170 mm (Excluding protruding parts)
Net Weight / Gross (with packaging)1.6 kg / 2.1 kg

8. Performance Charts

8.1 Balanced Headphone Output

Maximum unclipped power (mW) versus load impedance (Ω) per channel for balanced output.

Chart showing balanced headphone output power (mW) versus headphone impedance (ohm) for AUDALYTIC HP70.

Graph illustrating the balanced headphone output power of the HP70 across various impedances.

8.2 Single-Ended Headphone Output

Maximum unclipped power (mW) versus load impedance (Ω) per channel for single-ended output.

Chart showing single-ended headphone output power (mW) versus headphone impedance (ohm) for AUDALYTIC HP70.

Graph illustrating the single-ended headphone output power of the HP70 across various impedances.

9. Rješavanje problema

If you encounter issues with your AUDALYTIC HP70, please refer to the following common troubleshooting steps:

  • Bez napajanja: Ensure the power cable is securely connected and the power outlet is functional. Check the fuse on the rear panel.
  • Nema zvuka: Verify that the correct input source is selected. Check all audio cable connections. Ensure headphones are properly plugged in and not muted. Adjust the volume level.
  • Izobličen zvuk: Check audio cables for damage or loose connections. Ensure the audio source is not overdriving the input. Try a different audio source or headphones to isolate the problem.
  • Daljinski upravljač ne radi: Check battery orientation and charge. Ensure no obstructions are between the remote and the HP70's IR sensor.
  • Isprekidani zvuk: Check all connections for looseness. Ensure the device is placed on a stable surface away from strong electromagnetic interference.

Ako problem i dalje postoji nakon što ste isprobali ove korake, obratite se korisničkoj podršci.

10. Održavanje

To ensure the longevity and optimal performance of your AUDALYTIC HP70, follow these maintenance guidelines:

  • Čišćenje: Za čišćenje vanjske strane uređaja koristite meku, suhu krpu. Izbjegavajte korištenje abrazivnih sredstava za čišćenje, otapala ili kemijskih sprejeva jer mogu oštetiti završnu obradu.
  • Ventilacija: Ensure the unit has adequate ventilation. Do not block the ventilation holes or place the unit in an enclosed space that restricts airflow.
  • Okruženje: Operate and store the device in a cool, dry environment, away from direct sunlight, heat sources, excessive dust, and moisture.
  • Rukovanje: Pažljivo rukujte uređajem. Izbjegavajte ispuštanje ili izlaganje jakim udarcima.
  • Isključivanje: When not in use for extended periods, power off the unit and disconnect it from the power supply.

11. Jamstvo i podrška

Thank you for choosing GUSTARD HIFI products. To safeguard your rights and interests, please read the following warranty terms carefully to ensure you receive comprehensive after-sales service.

11.1 Jamstvo za proizvod

You will enjoy a 2 godina besplatnog jamstva i lifetime maintenance from the date of purchase of your GUSTARD HIFI product.

  • The manufacturer covers freight costs only from mainland China. Any freight and tax generated from overseas will be handled by the user in negotiation with the dealer.

11.2 Free Warranty Service

During the free warranty period, if the GUSTARD HP70 (or GUSTARD X30, as mentioned in the original document) fails due to component quality or manufacturing problems under normal use, it will be repaired free of charge.

11.3 Beyond the Warranty Service

Products will no longer be provided free warranty service under the following circumstances:

  • The product's purchase date has exceeded the predetermined warranty period.
  • The model, barcodes, and purchase date do not match the actual product and warranty card.
  • Unauthorized modifications to the circuit, components, or self-repaired product without GUSTARD technician permission.
  • Damage caused by irresistible natural forces.
  • Damage beyond the permitted use or environmental conditions.
  • Damage due to incorrect use or improper storage, including but not limited to:
    • Voltage too high, burning circuits or components.
    • Bumping, resulting in damage to the shell or internal components.
    • Damage due to water, oil, liquid, or excessive dust.
    • Product oxidation or corrosion.
  • Damage beyond the warranty period, such as individual component damage or appearance issues due to human damage, or firmware modifications leading to the unit being unable to work by unauthorized users.

In cases beyond warranty, GUSTARD commits to providing maintenance services for a reasonable fee (excluding large area components or circuit boards burned beyond repair). Freight, maintenance costs, and material costs will be borne by the user.

11.4 Official User Manual Video

For a visual guide to the AUDALYTIC HP70, please watch the official user manual video:

This video provides a visual guide to the AUDALYTIC HP70, covering its features, connections, and basic operation as detailed in the user manual.

Proizvođač: Shenzhen Goshide Technology Co., LTD

Address: Room 302, Building 1, No. 28, Huimin 1st Road, Guanlan Sub-district, Longhua District, Shenzhen City, Guangdong Province

Tel: +86-18682080102

Webstranica: http://www.gustard.com

Email: service@gustard.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.