Uvod
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your JONR H2 Pro Cordless Wet Dry Vacuum Cleaner. Please read this manual thoroughly before using the appliance and retain it for future reference.
Važne sigurnosne upute
Kako biste smanjili rizik od požara, strujnog udara ili ozljede, uvijek slijedite osnovne mjere opreza, uključujući sljedeće:
- Pročitajte sve upute prije uporabe ovog uređaja.
- Nemojte koristiti na otvorenom ili na mokrim površinama.
- Ne dopustite da se koristi kao igračka. Potrebna je velika pažnja kada se koristi od strane djece ili u blizini djece.
- Koristite samo kako je opisano u ovom priručniku. Koristite samo nastavke koje preporučuje proizvođač.
- Ne koristite s oštećenim kabelom ili utikačem. Ako uređaj ne radi kako bi trebao, ispušten je, oštećen, ostavljen na otvorenom ili u vodu, vratite ga u servisni centar.
- Nemojte vući ili nositi za kabel, koristiti kabel kao ručku, zatvarati vrata na kabelu ili povlačiti kabel oko oštrih rubova ili uglova. Ne prelazite uređajem preko kabela. Držite kabel dalje od zagrijanih površina.
- Ne isključujte utikač povlačenjem za kabel. Za isključivanje, uhvatite utikač, a ne kabel.
- Nemojte rukovati utikačem ili uređajem mokrim rukama.
- Ne stavljajte nikakve predmete u otvore. Nemojte koristiti sa začepljenim otvorima; čistite od prašine, dlačica, dlaka i svega što može smanjiti protok zraka.
- Držite kosu, široku odjeću, prste i sve dijelove tijela dalje od otvora i pokretnih dijelova.
- Ne skupljajte ništa što gori ili se dimi, poput cigareta, šibica ili vrućeg pepela.
- Nemojte koristiti za skupljanje zapaljivih ili zapaljivih tekućina, poput benzina, ili koristiti u područjima gdje bi mogle biti prisutne.
- Nemojte koristiti bez postavljene vrećice za prašinu i/ili filtera.
- Isključite sve kontrole prije isključivanja.
- Budite posebno pažljivi kada čistite stepenice.
- Nemojte koristiti za skupljanje otrovnih materijala (klor izbjeljivač, amonijak, sredstvo za čišćenje odvoda itd.).
- Ne koristite u zatvorenom prostoru gdje su prisutne pare od boje na bazi ulja, razrjeđivača boje, nekih tvari protiv moljaca, zapaljive prašine ili drugih eksplozivnih ili otrovnih para.
- Spojite samo na pravilno uzemljenu utičnicu. Pogledajte upute za uzemljenje.
Proizvod gotovview
The JONR H2 Pro is a versatile cordless wet dry vacuum cleaner designed for efficient floor cleaning. It features hot water self-cleaning, an OdorLock system, powerful suction, and a lie-flat design for comprehensive coverage.
Slika 1: Što se nalazi u kutiji. This image displays the JONR H2 Pro Wet & Dry Vacuum Cleaner, Charging Station, Power Cord, User Manual, Maintenance Brush, and Floor Cleaning Solution.
Postavljanje i montaža
- Ugradnja ručke: Align the handle with the main body and push it firmly until it clicks into place.
Video 1: Handle Installation. This video demonstrates how to align and secure the handle onto the main body of the JONR H2 Pro (0:14-0:17).
- Postavljanje stanice za punjenje: Connect the power cord to the charging station and plug it into a wall outlet. Place the charging station on a flat, stable surface.
Video 2: Charging Station Connection. This video shows how to connect the power plug to the charging station, indicating it is ready for use (0:17-0:26).
- Napunite spremnik za čistu vodu: Press the release button to detach the clean water tank. Fill it with clean water up to the maximum level. Add 1.5 to 2 capfuls of JONR cleaning solution. Securely close the tank lid and reattach the tank to the main body.
Video 3: Filling the Clean Water Tank. This video illustrates the process of filling the clean water tank with water and adding the cleaning solution, then reattaching it to the vacuum (0:26-0:47).
- Install Dirty Water Tank: Ensure the dirty water tank is properly closed and locked. Place it onto the base of the vacuum cleaner.
Video 4: Installing the Dirty Water Tank. This video demonstrates how to securely install the dirty water tank onto the vacuum cleaner's base (0:47-0:54).
Upute za rad
- Uključivanje: Pritisnite gumb napajanja (⑂) on the handle to turn on the appliance. It will automatically start in Automatic Mode.
Video 5: Starting the Vacuum. This video shows pressing the power button to start the JONR H2 Pro in Automatic Mode (0:54-1:00).
- Odaberite način čišćenja: Press the mode selection button (⑁) to cycle through available cleaning modes:
- Automatski način rada: For general cleaning tasks.
- Intenzivni način rada: For stubborn stains and heavy dirt.
- Bathroom Mode: Designed for rapid water absorption and drying on bathroom surfaces.
Video 6: Mode Selection. This video demonstrates how to select different cleaning modes, including the specialized Bathroom Mode, using the mode button (1:10-1:14).
- Operacija čišćenja: Guide the vacuum cleaner across the floor. The 180° lie-flat design allows access under furniture. The triple-edge design helps clean corners and edges effectively.
Figure 2: 180° Lie-Flat Cleaning. This image shows the JONR H2 Pro operating in a fully reclined position, demonstrating its ability to clean under low-clearance furniture.
Figure 3: Triple-Edge Cleaning. This image highlights the vacuum's design for cleaning close to edges and into corners, ensuring thorough coverage.
Održavanje i njega
- Ciklus samočišćenja: After use, return the H2 Pro to the charging station. Press the self-cleaning button (⑁) to initiate the hot water self-cleaning and air-drying cycle.
Video 7: Initiating Self-Cleaning. This video shows placing the vacuum on its charging station and pressing the self-cleaning button to start the cycle (1:17-1:24).
Figure 4: Deep Self-Cleaning. This image illustrates the hot water self-cleaning and hot air drying process for the roller brush, ensuring hygiene and preventing odors.
- Ispraznite i očistite spremnik za prljavu vodu: After the self-cleaning cycle, remove the dirty water tank. Open it from both sides and empty the contents. Rinse the tank with clean water and use the provided maintenance brush to clean the liquid level sensor and any residue.
Video 8: Cleaning the Dirty Water Tank. This video demonstrates how to remove, empty, and clean the dirty water tank, including using the maintenance brush for the sensor (1:24-1:40).
- Clean Roller Brush and Filter Sponge: Remove the roller brush and rinse it with clean water. Remove the filter sponge and clean it under running water. Allow all cleaned components to air dry completely before reassembling.
Video 9: Roller Brush and Filter Cleaning. This video shows how to remove and rinse the roller brush and filter sponge, emphasizing air drying before reassembly (1:40-2:18).
- Ponovno sastavljanje: Once all parts are dry, reinsert the filter sponge, install the roller brush, and then reattach the dirty water tank.
Rješavanje problema
| Problem | Mogući uzrok | Otopina |
|---|---|---|
| Vakuum se ne uključuje | Battery drained; Power button not pressed correctly. | Charge the vacuum; Ensure the power button is pressed firmly. |
| Loše usisavanje | Dirty water tank full; Roller brush tangled; Filter clogged. | Empty dirty water tank; Clean roller brush; Clean or replace filter. |
| Propuštanje vode | Dirty water tank not properly installed/locked; Clean water tank lid not sealed. | Ensure dirty water tank is securely installed and locked; Check clean water tank lid for proper seal. |
| Neugodan miris | Dirty water tank not cleaned; Roller brush not cleaned. | Empty and thoroughly clean dirty water tank; Clean roller brush and allow to air dry. |
| Self-cleaning not starting | Vacuum not correctly placed on charging station; Clean water tank empty. | Ensure vacuum is properly docked; Fill clean water tank. |
Tehnički podaci
| Značajka | Detalj |
|---|---|
| Marka | JONR |
| Model | H2 Pro |
| Dimenzije proizvoda | 28 D x 23 Š x 111 V centimetara |
| Težina artikla | 7.89 funti (otprilike 3.58 kg) |
| Kapacitet spremnika čiste vode | 1500 ml |
| Kapacitet spremnika za prljavu vodu | 600ml (bottom-mounted) |
| Snaga usisavanja | 20,000 Pa |
| Scrubbing Speed | 500 otkucaja u minuti |
| Runtime | Do 45 minuta |
| Temperatura samočišćenja | 70°C vruća voda |
| Preporuka za površinu | Hard Floor, Hardwood, Tile |
Jamstvo i podrška
For warranty information, technical support, or service inquiries, please refer to the official JONR website or contact JONR customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
Manufacturer Contact Information: Suzhoujingwakeji co.Itd, Unit A0403, Building 4, Suzhou International Science & Technology Park, No. 1355 Jinji Lake Avenue, Suzhou Industrial Park, Suzhou, Jiangsu 215000, China.