mGYDY K01 EBike Display User Manual

1. Uvod

The mGYDY K01 EBike Display is a compact and intelligent speedometer cycling computer designed for electric bicycles. It provides essential riding data and control functions, enhancing your ebike experience. This manual provides detailed instructions for installation, operation, and maintenance of your K01 display.

2. Kompatibilnost

The K01 EBike Display is specifically designed for use with BAFANG electric bike motors that utilize the UART communication protocol. It is compatible with BAFANG BBS0102B, G340, G320, and BBSHD mid-drive motors.

The display can be mounted on handlebars with a diameter of φ22.2 mm or φ25.4 mm.

Bilješka: Please verify your ebike motor's model number and communication protocol before installation to ensure compatibility.

3. Značajke proizvoda

• LCD zaslon od 2.2 inča: Provides clear, glare-resistant visuals with a 4-level backlight adjustment for optimal visibility in various lighting conditions.
• All-Weather Readability: IP66 waterproof rating ensures durability in rain or snow. Features an auto-dimming backlight and a light sensor to activate headlights at dusk.
• Sveobuhvatan prikaz podataka: Shows real-time speed, single trip distance, total mileage (ODO), maximum speed, average speed, battery level, and power assist (PAS) level.
• Efficient Speed Control: Offers 0-9 adjustable power assist levels to suit different riding conditions and conserve energy.
• Walk Assist Function: Includes a 6km/h walk assist feature for easy maneuvering when not riding.
• Error Code Indication: Displays error codes for convenient system maintenance and troubleshooting.
• Zaštita lozinkom: Built-in system to secure your ebike from unauthorized use.

4. Sadržaj paketa

Paket uključuje:

• 1 x mGYDY K01 EBike Display

5. Postavljanje i instalacija

Follow these steps to install your K01 EBike Display:

1. Odaberite mjesto za montažu: The K01 display is designed to be installed on the left side of the handlebar. Ensure there is sufficient space for secure mounting.
2. Promjer upravljača: Confirm your handlebar diameter is either 22.2mm or 25.4mm. The display's clamp is designed to fit these sizes.
3. Osigurajte zaslon: Open the display clamp, position it on the handlebar, and tighten the screws securely. Ensure the display is oriented correctly for optimal viewing.
4. Spojite kabel: Locate the 5-pin female circular connector on the display cable. Connect it to the corresponding male connector on your BAFANG motor system. Ensure the connection is firm and secure.
5. Uprava za kabele: Route the cable neatly along your ebike frame, securing it with cable ties if necessary, to prevent interference with moving parts.

Image: K01 EBike Display mounted on a handlebar, showing the side view sa clamp. This illustrates the typical installation position.

Slika: Stražnja strana view of the K01 EBike Display, highlighting the handlebar clamp mechanism and the mounting screw.

Slika: Donji dio view of the K01 EBike Display, illustrating the integrated cable and the 5-pin female circular connector for connection to the ebike motor.

6. Upute za rad

The K01 display features three buttons for operation: + (Plus), Vlast, i - (Minus).

Slika: prednja strana view of the K01 EBike Display with the screen illuminated, displaying current speed, battery charge, and power assist level.

6.1 Uključivanje/isključivanje

• Pritisnite i držite Vlast gumb za uključivanje ili isključivanje zaslona.

6.2 Adjusting Power Assist (PAS) Levels

• Pritisnite tipku + button to increase the power assist level (0-9).
• Pritisnite tipku - button to decrease the power assist level (0-9).
• Level 0 indicates no motor assistance.

6.3 Displaying Mileage and Speed Data

• The display automatically shows real-time speed.
• Kratko pritisnite Vlast button to cycle through different data displays:
• PUTOVANJE: Kilometraža jednog putovanja.
• ODO: Total mileage.
• MAKSIMALNO: Maximum speed achieved during the current trip.
• PROSJEČNO: Prosječna brzina tijekom trenutnog putovanja.

6.4 Headlight Control

• The display features a light sensor that can automatically activate your ebike's headlights at dusk if connected and supported by your ebike system.
• Glavaamp indication icon will appear on the display when the headlights are active.

6.5 6km/h Walk Assist Function

• To activate the walk assist function, press and hold the - button. The ebike will move at a steady speed of 6km/h.
• Otpustite - button to deactivate the walk assist.

7. Funkcije prikaza iznadview

The K01 display provides a clear overview of your ebike's status and riding data. Refer to the image below for a visual guide to the display elements.

Image: K01 EBike Display with all segments illuminated, providing a comprehensive view of speed, battery level, PAS level, and other indicators like TRIP, ODO, MAX, AVG, and ERR.

• Indikacija baterije: Displays the current battery charge level (1-9 levels).
• Prikaz brzine: Shows current speed in MPH or KM/H.
• Prikaz kilometraže: Toggle between TRIP (single trip distance) and ODO (total distance).
• PAS razina: Indicates the current Power Assist System level (0-9).
• Ikona prednjeg svjetla: Illuminates when headlights are active.
• Error Code (ERR): Displays specific error codes if a system fault occurs.

8. Specifikacije

Technical specifications for the mGYDY K01 EBike Display:

Image: Technical drawing of the K01 EBike Display, illustrating its physical dimensions: 78.5mm in length, 49mm in height, and 14mm in thickness.

9. Održavanje

To ensure the longevity and optimal performance of your K01 EBike Display, follow these maintenance guidelines:

• Čišćenje: Obrišite zaslon i kućište mekom krpomamp cloth. Avoid using abrasive cleaners or solvents, which can damage the screen or casing.
• Izloženost vodi: While the display is IP66 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the connector is dry before connecting or disconnecting.
• Temperatura: Operate and store the display within the specified temperature ranges (-20°C to 70°C operating, -30°C to 80°C storage) to prevent damage.
• Pregled kabela: Periodically check the display cable and connector for any signs of wear, damage, or corrosion. Ensure connections remain secure.
• Fizička zaštita: Avoid dropping the display or subjecting it to strong impacts, which can cause internal or external damage.

10. Rješavanje problema

The K01 display is designed to indicate error codes (ERR) if a system issue is detected. If you encounter a problem, check the display for any error codes and refer to your BAFANG motor's manual for specific error code meanings and troubleshooting steps.

• Zaslon se ne uključuje:
  • Ensure the ebike battery is charged and turned on.
  • Check that the display cable is securely connected to the motor system.
  • Verify there is no visible damage to the display or cable.
• Inaccurate Speed/Mileage:
  • Ensure the wheel size setting in your ebike controller (if adjustable) is correct.
  • Check the speed sensor on your ebike for proper alignment and function.
• Razina PAS-a se ne mijenja:
  • Verify the buttons are functioning correctly.
  • Check for any error codes displayed.

If the issue persists or you encounter an unfamiliar error code, please contact the manufacturer's support for assistance.

11. Jamstvo

The mGYDY K01 EBike Display comes with a 1-godišnje jamstvo proizvođača od datuma kupnje. Ovo jamstvo pokriva nedostatke u materijalima i izradi pri normalnoj uporabi. Ne pokriva štetu uzrokovanu zlouporabom, nesrećama, neovlaštenim preinakama ili nepravilnom ugradnjom.

Zadržite svoj dokaz o kupnji za jamstvene zahtjeve.

12. Podrška

For further assistance, technical support, or warranty inquiries, please contact mGYDY customer service through the retailer where you purchased the product or refer to the contact information provided with your purchase.