JONR H2 PRO MAX Wet Dry Vacuum Cleaner User Manual

Uvod

Thank you for choosing the JONR H2 PRO MAX Wet Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your appliance. Please read this manual thoroughly before using the product and retain it for future reference.

Važne sigurnosne upute

WARNING: To reduce the risk of fire, electric shock, or injury, read all instructions before use.

• Uređaj uvijek koristite na suhoj, ravnoj površini.
• Nemojte uranjati uređaj u vodu ili druge tekućine.
• Držite kosu, široku odjeću, prste i sve dijelove tijela dalje od otvora i pokretnih dijelova.
• Koristite samo kako je opisano u ovom priručniku. Koristite samo nastavke koje preporučuje proizvođač.
• Ne koristite s oštećenim kabelom ili utikačem. Ako uređaj ne radi kako bi trebao, ako je pao, oštećen, ostavljen vani ili je pao u vodu, vratite ga u servisni centar.
• Nemojte rukovati utikačem ili uređajem mokrim rukama.
• Ne stavljajte nikakve predmete u otvore. Nemojte koristiti sa začepljenim otvorima; čistite od prašine, dlačica, dlaka i svega što može smanjiti protok zraka.
• Budite posebno oprezni prilikom čišćenja na stepenicama.
• Nemojte koristiti za skupljanje zapaljivih ili zapaljivih tekućina, poput benzina, ili koristiti u područjima gdje bi mogle biti prisutne.
• Ne skupljajte ništa što gori ili se dimi, poput cigareta, šibica ili vrućeg pepela.
• Spriječite nenamjerno pokretanje. Provjerite je li prekidač u isključenom položaju prije spajanja na bateriju, podizanja ili nošenja uređaja.
• Punite samo punjačem koji je naveo proizvođač.
• U uvjetima zlouporabe, iz baterije može iscuriti tekućina; izbjegavajte kontakt. Ako slučajno dođe do kontakta, isperite vodom. Ako tekućina dođe u kontakt s očima, dodatno potražite liječničku pomoć.

Sadržaj paketa

Prilikom raspakiranja provjerite jesu li sve komponente prisutne i u dobrom stanju.

• JONR H2 PRO MAX Main Unit
• Sklop ručke
• Dock za punjenje
• Adapter napajanja
• Cleaning Solution (Starter Bottle)
• Četka za čišćenje
• Držač pribora
• korisnički priručnik

Image: JONR H2 PRO MAX Wet Dry Vacuum Cleaner and its included accessories. This image shows the main unit, handle, charging dock, and various cleaning tools.

Dijagram proizvoda

Familiarize yourself with the parts of your JONR H2 PRO MAX.

1. Spremnik čiste vode (CWT)
2. Spremnik za prljavu vodu (DWT)
3. Gumb za otpuštanje ručke
4. Zaslon zaslona
5. Gumb za napajanje
6. Gumb za odabir načina rada
7. Gumb za samočišćenje
8. Poklopac role četke
9. Valjčić četkom
10. Kontakti za punjenje
11. Dock za punjenje

Image: Labeled diagram illustrating the main parts of the JONR H2 PRO MAX Wet Dry Vacuum Cleaner, including tanks, buttons, and brush roll area.

Postavljanje

1. Sklop ručke

1. Insert the handle assembly into the main unit until you hear a click, ensuring it is securely locked.
2. To disassemble, press the handle release button and pull the handle upwards.

2. Punjenje baterije

• Place the main unit onto the charging dock, ensuring the charging contacts align.
• Spojite adapter za napajanje na punjač i uključite ga u zidnu utičnicu.
• The display screen will indicate charging status. A full charge takes approximately 4 hours.
• For optimal battery life, fully charge the unit before first use.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner positioned on its charging dock, with the power adapter connected.

3. Filling the Clean Water Tank (CWT)

• Press the CWT release button and remove the tank.
• Open the tank cap and fill with clean tap water. For enhanced cleaning, add a small amount of JONR cleaning solution (do not exceed the MAX line).
• Close the cap securely and reinsert the CWT into the main unit until it clicks into place.

Upute za rad

1. Uključivanje/isključivanje

• Press the Power Button to turn the unit on. The display screen will illuminate.
• Press the Power Button again to turn the unit off.

2. Selecting Cleaning Mode

The JONR H2 PRO MAX offers multiple cleaning modes:

• Automatski način rada: Default mode for general cleaning. The unit automatically adjusts suction and water flow based on floor dirt detection.
• Max način rada: Pruža maksimalno usisavanje i protok vode za jako zaprljana područja.
• Način usisavanja: Za usisavanje tekućina bez točenja vode.

Press the Mode Selection Button to cycle through the available cleaning modes. The selected mode will be displayed on the screen.

3. Cleaning Your Floors

• Tilt the main unit back to engage the brush roll and start cleaning.
• Move the unit slowly forward and backward over the desired area.
• The unit will dispense water and cleaning solution, scrub the floor, and vacuum up dirty water simultaneously.
• The display screen provides real-time information such as battery level, current mode, and dirty water tank status.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner actively cleaning a hard floor surface, demonstrating its wet and dry cleaning capabilities.

Održavanje

Regular maintenance ensures optimal performance and extends the lifespan of your JONR H2 PRO MAX.

1. Emptying and Cleaning the Dirty Water Tank (DWT)

• After each use, or when the DWT full indicator appears, remove the DWT.
• Open the DWT lid and carefully pour out the dirty water.
• Rinse the DWT thoroughly with clean water. Clean the filter inside the DWT if necessary.
• Allow the DWT and filter to air dry completely before reassembling.

2. Funkcija samočišćenja

• Place the unit on the charging dock. Ensure the CWT has sufficient clean water.
• Press the Self-Cleaning Button. The unit will perform an automatic cleaning cycle for the brush roll and internal pipes.
• After the self-cleaning cycle, empty and clean the DWT.
• The hot air drying function will then activate to dry the brush roll, preventing odors.

Image: The JONR H2 PRO MAX Wet Dry Vacuum Cleaner on its charging dock, with indicators suggesting the self-cleaning cycle is active.

3. Čišćenje valjka četke

• Turn off the unit and remove it from the charging dock.
• Open the brush roll cover.
• Remove the brush roll. Use the provided cleaning brush to remove any hair, debris, or tangled material.
• Isperite valjak četke pod tekućom vodom.
• Allow the brush roll to air dry completely before reinstalling. Ensure it is properly aligned.

4. Čišćenje filtra

• The filter is located within the DWT. Remove it and rinse under clean water.
• Prije ponovnog umetanja, ostavite filter da se potpuno osuši na zraku.
• Replace the filter every 3-6 months, or as needed, for optimal performance.

Rješavanje problema

U ovom odjeljku potražite uobičajene probleme i njihova rješenja.

Tehnički podaci

Jamstvo i podrška

JONR products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact JONR customer service.

Please visit the official JONR website or refer to your purchase documentation for specific warranty terms and contact details.

Napomena: Sačuvajte račun kao dokaz o kupnji za slučaj reklamacije.